AMOLEN Silk PLA 3D Printer Filament Bundle, Multicolor Gradient Rainbow PLA 1.75mm Pack, Shiny Fast Color Change 3D Printing Filament for Most FDM 3D Printer, 200g X 4 Spools

The AMOLEN Carbon Fiber PLA filament bundle is an absolute must-have for both hobbyists and professionals. The matte finish across the four included colors—Black, Dark Grey, Sapphire Blue, and Burgundy—adds a sleek and professional touch to every print. With 200g per color (800g total), it is perfect for experimenting with multiple hues without committing to full-sized spools. Performance-wise, this filament is exceptional. The 15% premium carbon fiber content makes it lighter, stiffer, and more durable than standard PLA, with lower warp, minimal shrinkage, and excellent layer adhesion. I’ve had great success printing complex parts like UAV components, model aircraft joints, and drive mechanisms. The self-supporting properties make supports incredibly easy to remove while still leaving behind a smooth surface, which is a huge plus for preserving detail. The dimensional accuracy of ±0.02mm ensures consistent feeding and precision prints every time. Printing is smooth, with no clogs or bubbles, thanks to the high-quality USA-sourced raw materials and careful vacuum sealing. The perfect winding and tangle-free spooling make loading simple, and the recommended settings (190-220℃ print temp, 0-60℃ bed temp) have worked flawlessly. It’s clear that AMOLEN takes pride in its product quality and excellent after-sales support. If you’re looking for a versatile, strong, and visually striking PLA-CF filament, this is an outstanding choice. I will definitely be ordering again.

We got my son a Toybox 3D printer for Christmas and he wanted some additional colors of filament. This bundle works perfectly! He has printed several things with all the colors and there have been no issues. It is great quality, no clogging up the machine, and the prints turn out great. We will be buying more colors!

Printed beautifully right out of the package. These are smaller 200g rolls so be aware of how much your project will require. Might be a bit more because my project used 209g with supports and I still had some left on the roll but not much. I use a Bambu A1, Printed the sugar skull shown below with the Blue/Fuchsia at 220 and 55 on a cool plate. Supports came off super clean and skull was beautiful. I should have used a brim as I got slight pull up on the bottom edges. Probably should not have used the cool plate either and gone textured. Great filament and would absolutely buy a bigger roll next time. Great trial size.

This is a set of beautiful colors. I love the shine it provides to printed things. The print quality seems on par with anything else I have used. My main issue happened on one spool (so far). Once the filament got down to about 1/3 remaining, the filament became extremely tangled, making it impossible to feed the system. I tried to unravel and place back, but that became a very tangled mess and resulted in a good amount of wasted filament while the remaining filament is still a mess. Overall, this is a nice set if the situation I had was a lemon-type situation and this is not a common occurrence. Edit: I am impressed with customer service. Not only did they reach out to remedy the situation, but they also asked for information on the label so that they could check the product like. I love when a brand trouble-shoots their products, stands behind them, and has great customer support. I would definitely do business with this seller again.

This works wonderfully when you have it configured to the right settings for your machine. I am brand new to 3D printing, I am using the FlashForge Adventure 5m PRO and it took me a while to get the right settings; I ended up using chatgbt to go over every category in orcaslicer per my machine and choice of filament. Highly recommend! These silky prints printed beautifully! A lot of comments here say this is junk, I guarantee it’s because their settings are off. Configure your settings, do test prints, use a quality machine and it’ll print correctly.

As fun looking as this pack is, it was not functional at all. In fact I spent most of a day trying to figure out why the blue/silver filament would only print half way then the object would move and mess up the print. I tried 5 times. Cleaning the bed, using alcohol, trying adhesive. Nothing worked. I tried printing the object with a different brand filament. No problems at all! I chalked it up to needing a bigger base for printing with this type of filament. Then a couple days went by and I went to try to print something else. I saw the blue/silver filament broken in channel 3 of my 4 channel multicolor 3d printer. It took a lot of research to figure out how to take things apart to get it out. Then I still had an error when trying to print with the red filament. I took things apart even more and found another broken blue/silver piece further in the unit. Then I tried printing again. It looked like it was going to work. The red filament was feeding through. Then I got the same error. After another 2 hours of research and taking more things apart, I finally found a piece of the red filament had broken off towards the bottom of the 4 in 1 connector. Thankfully I was able to end up getting it out, and I have been able to print just fine with a different brand filament. The reality is, this brand filament in the package was terrible. Not just 1 but 2 of the filaments broke inside my machine. I did not try any other colors. With all of the problems and troubleshooting I spent about 10-12 hours dealing with the issues. Not worth taking a chance with this stuff. Packages returned. Refund given.

Second time purchasing! Great filament. Happy with the coloring and the prints. Will be back for more as we need it!

Pics are the blue/green and red/gold rolls. Looks pretty where it's clean, but where other filaments with my setup I had not problems of this sort, both rolls I've tried so far from this sample pack chewed up the filament at the extruder gear To be fair...ish... these were in a filament dryer that honestly is bad for using while printing. But again, of the four rolls I've used in that thing, ONLY these two did this at all. Minimal resistance to line tension and retraction. So far the only filaments I've been able to just bend a couple times to break the line or had break while straightening the end to get it into the extruder tubes. Other things to note: This stuff makes STICKY prints. Good for adhesion, but feels like I'm holding a glue stick when holding relatively fresh prints. Makes the results fairly strong too, which is double-edged as getting these supports off has been literally painful. They're, even at effectively minimum density/size, almost as hard as the print itself and very, very clingy to the print body. I could probably learn what settings I could tweak to mitigate this some, but I'd burn most a roll trying. It's worth noting the spool size is ~half a normal 1kg spool. Makes sense given these are 200g rolls, but don't expect the mini-spools to work well in a dryer or any other setups designed for normal rolls. Alone these were jumping and swinging around in my dryer like a jumping bean in hot oil.. Bit odd, but my super glue that's worked on all my PLA stuff so far would not stick to this stuff. To sum up: Prints are pretty and hard when / if you get a print done w/o it falling apart, and get supports off w/o breaking it. Shorter color transition distance would be really nice. An actual complete blending of the two colors the entire roll would probably be much nicer, given the effect this has. The Red/Gold has specks of gold in the red, granted, but w/o the just right lighting one can barely notice even the gold section being gold. Red/gold head is ~26m of material and only the crown of the head is notably gold in normal light (pics are with flash and camera's auto color correction). The blue/green was disappointing too. Printed the four TMNT boys and got two blue ones and two green ones... none were actually blue/green.... and the green is actually teal. Pretty, neat, but REALLY not worth the price for its quality.