PLA 3D Filament 1.75mm Wood 200g x 4 Spools

Needed this for the color. Printed a red poodle and this was a great color match. I do think this is a little brittle compared to regular PLA, but printed really well. Would recommend.

I use this wood PLA to make small parts for a model ship I'm building. Designing the parts in CAD and 3D printing them is much faster and easier than carving the pieces from wood and then staining them. This material tends to string a lot but the strings can easily be trimmed from the pieces I'm making. I use a 0.4mm nozzle and have not had any blockages. The colors closely match the wood I'm using and cover a good range of wood colors. The fineness of the printed pieces is good, as you can see from the photos.

I bought the OVV3D Wood 3D Printer Filament Bundle because I wanted to try printing some custom "wood carved" objects on my 3D printer—and I’m really impressed. The filament ran cleanly through my Prusa Mini with no clogs or stringing, which is always a concern with composite filaments. Each roll had a unique wood tone that added great variety to my prints without needing post-processing. The real magic is in the finish—printed parts come out with a subtle matte texture and wood-like appearance that looks great straight off the bed. I used it for a few decorative models and even a plant pot sleeve, and every piece has that organic feel I was going for. It doesn’t have that burnt smell some wood filaments give off either, which was a pleasant surprise.

I had total success using .6mm nozzle and only printing decorative non-structural sections of this project. This custom picture frame is mostly basic brown PLA with the OVV3D Wood (Redwood and Oak) fused nicely on the upper layers. It feels and smells like wood! Very nice! I like this filament, but it is rough, inconsistent, and makes fragile prints. It may clog .4mm nozzle too easily, so stick with .6mm which allows a lower nozzle temp of 190C. Dry it well before use, even fresh from the package. So, print only decorative surfaces and you will be fine. Print structural stuff with basic PLA first and layer on the OVV3D Wood filament or print separate pieces for gluing on later. That will save costs too - print only what needs to visibly wooden and you'll be fine. Not for beginners.

I cannot wait to order more of this stuff! My Bambu P1S prints it perfectly and my whole printer room smells like freshly worked wood. Worth every penny!