YOILES 9PCS Cat Litter Box Pee Shields,Transparent Easy Clean Splash Guard for Open Top Litter Pan 14.5×11.5in- Litter Box Not Included (9, Clear)

Easy to put on and super adhesive! Love how it keeps all the litter inside ! Works well on stainless steel litter boxes !

Very easy to install, easy to clean, and work as intended. One of our 2 cats developed a habit is aiming high in the litter box (ruled out health causes, he's just a silly guy). And these are very helpful in keeping the pee IN the box and save me time cleaning up. CAN be cut smaller if necessary with a pair of regular scissors. I use a single shield on the back of my Target Up & Up brand litter boxes because that's the only spot my cat sprays. Works on enclosed litter boxes just fine. You may have to replace them after a few months of use, depending, as they can come loose over time. I always keep some spares on hand. Admittedly litter can get stuck on the lower lip, just under the sticky part, but I remedied this by putting a strip of clear packing tape flush over the bottom edge of the pee shield after installation to avoid pee and litter getting trapped. Make sure you thoroughly clean and dry the litter box/area you plan to stick them to first or it will eventually come unstuck.

These work pretty well. They aren't flimsy, and the adhesion strip is strong. The only issue is that the adhesion strip is maybe a half inch above the bottom of the plastic, so if urine hits it, the surface tension of the urine causes it to get pulled up underneath the guard. It is hard to get it out, as the guard is stiff and stays laying close to the surface of the litter box side. It would be better to have the adhesive strip extend all the way to the bottom of the guard. I appreciate that might affect the adhesive, but I'm guessing it would last longer than my cat can stand bits of pure urine permanently stuck under the edge of the guard (he needs a clean litter box). Alternatively, a flap at the bottom that can be raised to clean underneath could avoid this issue. Anyway, it's better than pee on the floor or wall, but I recommend you attach this as high as possible to hopefully lessen the number of times pee hits it and the resulting difficulty of trying to get that pee back out from underneath. I may try a strip of tape over the bottom edge, since at least that can be replaced as needed.

These things have saved me a ton of headaches! No pee or litter outside the box, works great for a small/ medium size if you only get one order, and was a great price.

It's the thought that counts I guess 😄 These "shields" looked promising after we set them up in the litter box as instructed. But as soon as the cat tried to use it, the whole thing came a tumbling down. The adhesive strips don't work very well and the corner connectors are very flimsy. Our cat is small and she couldn't turn around and do her thing without knocking the shields so they leaned/fell either over to the floor or inside the box all in her way. We're going to go head and buy a covered box.

I have extra large litter pans that are surrounded by doggie pads and all of that is on a big tarp. The doggie pads help catch litter that is tracked out of the box and they also catch urine from my one guy who goes inside the box, but on the edge and so sometimes a bit of urine goes over the side of the pan. I bought these and cut them in half along the longer side as I wanted my cats to adjust slowly to them, so I cut them to 6 inch height. Two of my cats stepped in around them and urinated in their choice spots. My third guy didn't want to go near them and he's the one who goes close to the pan edge. To avert new problems that might come about from these plastic sheets, I decided to just take a role of Scotch packaging tape and tape the edge of the doggie diapers high up on the exterior of the pan to catch the urine that occasionally goes over the side. That way, none will actually trickle under the pan onto the tarp. So, happy cat now and happy human as we've conquered this challenge. I think this sheets of thick plastic with adhesive are high-profit items as they cost about $3 per sheet. If these work for you or if you want to try making them on your own, I suggest buying your own thick plastic sheets and some velcro. The velcro can be a substitute for the adhesive and it might be sturdier than what this product provides, as a number of reviewers have said these sheets fall off after brief use. Hope this helps.

If you're reading this, then you almost certainly also have cats that just absolutely unload pee and farts all over your TCU (Turd Containment Units). I mean, just like a super soaker's worth of cat urine leaking out everywhere; stinky, icky, nasty, yellow pee pee soaking into your floors and carpets. I often wonder about the kinds of gold medal winning gymnastics they're doing in there to position themselves in a way where they can absolutely hotblast everything in a 6-foot radius. I'm talking about pee just streaming down the walls, puddling into lakes on the floor. Literally wading -- no, swimming -- through seas of tinkle. This product is great for keeping the pee contained. You know what I just realized though? Like there's almost certainly some splashback, you know? And I'm always picking my cats up and snuggling and smooching them, so I'm probably just kissing and rubbing cat pee all over myself on any given day. In fact, if you've hugged me or shook my hand anytime in the past 4 years, I've definitely transferred cat pee onto you, maybe a couple farts thrown in there too. Anyways, great pee shields

Installed this a few weeks ago and it's been working great as intended. The panels are flexible, cleanable and the adhesive has held on tightly to the litter box. It was very easy to install. I added some utility tape to the overlapping panels on the top. It's not really needed but helps the stability a little between segments and seals them to help prevent urine getting in between the panels.

Even high-sided litter trays didn't stop my male cat from peeing over the top of them. These just stick on to the inside of the (high-sided) tray and the laundry floor is finally clean. You do need to use a couple of bulldog clips or similar to link the sheets together and ensure there are no gaps, but they WORK, thank goodness... I wish I'd done it years ago! Getting another set for the shed.

Does not stick well at all