Delta 6-Setting Chrome Shower Head with High Pressure Spray, 6 Inch Round Shower Head, Showerheads, 1.75 GPM Flow Rate, Chrome 52535

I switched to this low flow head and I'm happy I did. I'm was in the camp that believed low flow heads just end up making the shower longer, and the bad ones do, but this head rinses just fine. PROS: 1. Super easy to install. I unscrewed the original head and put the new one on in about a minute. Because of plumbers tape, I needed no tools. I was inebriated, which shows how easy it was. 2. The tilt on this head is super good. I have no problem changing the angle with little effort. 3. The spray options are actually useful. I often ignore all the pulse and other head options, but a few make sense. The slow /stop is great for pre-warming the output before going full. The tight hard spray is good for pounding parts like the scalp or backside. The wide spray is my standard, and is soft and nice. Steams/mists well too. Switching modes is also easy, and it's not a hard lever at all. 4. The sale price I paid $50 was a solid deal in my opinion. 5. The look is pretty nice, though you can still sort of tell it's plastic. CONS: 1. Not a biggie, but it is plastic and doesn't have a solid feel when you adjust it. However, what would stainless cost and would that attract more hard water? SUMMARY: For the price I paid, and features that work, I've been enjoying this immensely. Maybe I'm actually using the same amount of water, because I'm staying in the shower longer to enjoy it. FYI: Some report that this head doesn't have good flow. I have 60 psi and it works fine. Homes with 45 psi or lower probably shouldn't be using low flow anyways. I can still do a 3 minute shower in this just fine.

Wow! I was super impressed by this shower head! When it arrived, I was a little worried by how small the box was. It might make me think that it wouldn't work all that well. However, when I opened it, the shower head was a perfect stainless steel color and looked very crystal clear and clean. The quality of the product was spot on. I could tell this shower head was built to last! I then went to install it. Sometimes, these products scare me because they are a pain to install; however, it was surprisingly easy! It took me just a minute to easily get it onto my shower head, and it started working flawlessly. It provides excellent water flow and allows for a range of pressures to be used!

This is a nice shower head. I was happy with the water flow pressure but my partner wasn’t. I removed the rubber o-ring w/mesh screen underneath (they are attached to each other) with needle nose pliers (tried a bent paper clip but that was ineffective). Next I *tried* to remove the flow restrictor with needle nose pliers but it wouldn’t budge (glued in tight I should imagine). So I then drilled a hole in the middle of the restrictor with 3/8” drill bit and voila! Shower stream is much improved. I could drill a larger hole (like 1/4”) but I don’t think it’s needed for our use. I will say that I was able to hand tighten the shower head on without leaks and without the need for plumbers tape. Some might choose to remove the o-ring/mesh screen to improve the flow but this will likely lead to leaking and you’ll then need plumbers tape. I like the different spray patterns and the “off” position simply dribbles water (it doesn’t shut off completely but greatly reduces the flow). This is good if you want to lather up and not waste water in the process. Seems well built and is an improvement over our lat shower head that only had one pattern, though good flow. I will say that a hand held shower might be a degree better (and there are nice ones on Amazon for a lower price than this unit) but overall we’re pleased.

This is a really good shower head. I should start by saying that if you are replacing a 2.5 gpm head with this 1.75 gpm head, the water flow may feel weak to you at first. It did to me. But you can pretty easily defeat the flow restriction and get much more power. I found it a little difficult to figure out how to make this adjustment, so here's what I did (photo shows the shower head upside down so you are seeing where it attaches to the water pipe). First, remove the combination black rubber washer/metal screen (on the left side in the photo -- this is a single piece and it does come out). Then you'll see a blue plastic piece with a very small rubber ring (indicated by my tiny screwdriver in the photo). That is the flow restriction mechanism. Use a tiny screwdriver or awl to pluck out this rubber ring (it broke when I pulled it out, but who cares, you won't need it again). Make sure to leave the blue plastic thingy in there. Then tuck the washer/screen piece back inside, pushing it as deep as it will go. Reattach the shower head in your shower and you're good to go. Once the flow restriction is removed, the head is really nice. The pulsing massage setting actually massages and feels great. The larger diameter means that on the bigger settings, which use more jets, more of your body is hit by the water than with a smaller head. That's nice. Very happy with this shower head now!

De lujo

This is a great easy to install shower head with easy to change settings.

Very happy with it, adjustment works nice and the spray patterns are all we need plus more.

The colour in the picture is the same as the delivered product. It works very well. The only thing I would say is that the pressure regulator should be removed before installation is you want decent pressure. Leaving the regulator on would downgrade this to 2 stars. Taking it off and the pressure is very acceptable. The various settings for flow pattern all work well.

Great product