HiQltyla 3 Way Speaker Crossover, 200W Passive for HiFi Home Audio, 2 Pack

These are dirt cheap and just as good as anything you’re going to find online from specialty speaker supply retailers that use overseas sourced components under other brand names. They work and sound great, and if you want to modify them with higher quality name brand parts, you can do so very easily. These revived an old pair of Yamaha floor speakers I got for free at a garage sale.

Well built with good quality components, small enough to use in small cases, very happy with my purchase

Connections are labeled, easy, and also removable! I restored some older speakers which sounded dull. With these, the mid-range and hi-range drivers really open up, and provided amazing clarity. The bass output does seem to have a hard cutoff at around 45Hz, so the I felt it was lacking for my speakers, which have 12" drivers. I decided to straight-wire the woofers, bypassing the crossover (which was how they were originally wired, using the woofer's natural roll-off) and the bass response was better. The mids and highs still run through the crossover, and are still crystal clear, so I'm still very happy with this crossover. If the bass had a lower limit of say 20Hz, these would be perfect. Still, for the price, this is hard to beat!

They give the life back to my old Bose 201.

I am impressed with this crossover! I have bought higher end crossovers that sound worse. Along with some new woofers, these brought new life to some old yamaha 3-way speakers. The audio is clean and flat enough for me personally. No shrill peaking or ultra bright highs.

these crossovers made my speakers sound really tinny and squeaky took them out and will modify them to different specs.

I’m using a car audio amplifier for some Dayton audio speakers and the crossover on the amplifier wasn’t giving enough of a full sound for me, (setting high and low pass to 90hz as recommended). These sound fantastic and make the speakers blend fantastically. I do not recommend using a subwoofer with the bass output on this crossover use the 90hz lpf instead because it does not block out the middle-low midrange on the bass output. Instead I recommend using a larger PA midbass-midrange style woofer such as a 8 inch like mine or even a 10 in a 4way set up like mine. A 6.5 would work but I’m not sure it would have as much of the lower midbass range as you larger woofers. Also it says 4-8 ohm but I have one crossover on a bridged channel to my mids and tweets to a final impedance of 2 ohms ( 4-8ohm svc speakers, +and- all wired together on each drivers), so you’ll be safe as long as you don’t drastically exceed the 200 watt rms rating. I’m going to make another speaker as shown in my picture and use it in a dj set up it gets loud and very crispy clear. I can’t record and play Bluetooth at the same time otherwise I’d record a video but I highly reccomend them for a similar to mine setup. The subwoofer is a 10 inch infinity kappa car subwoofer in a 1.5 cube 32 hz tuned birch 4 inch circle ground firing-ported box that works great in home audio or car audio applications as well.

I built my own 3 way bookshelf speakers and needed crossovers. I don't know anything about building crossovers so i relied on the reveiws to set me in the right direction. These got decent reviews and I took a shot. 4 inch woofer, 3 inch mid and 1 inch tweeter and they sound pretty amazing to be honest. Easy to wire up and they seem well built. For the money, you can't beat it.

スピーカー自作、改良される方にお勧めです。 大変満足してます。

​I am very happy with this purchase. I used it for a pair of vintage Electrohome speakers that were not working well. Now, they have come back to life! ​The price is very affordable and the installation was easy to do at home. By now, they are working fine and the sound is very natural. It is a great and cheap way to fix old equipment instead of buying something new. If you have old Electrohome speakers, I recommend this solution. 5 stars

Sound quality is good, works very well.

Funcionaron muy bien como lo esperaba

Awesome products... I was looking for such connectivity functions meaning I'm not good with soldering the cables with soldering iron and I'm lazy as well haha... With this I can just plug in the cables ,tighten it with screw and just leave it at that.. Thank you .. Thank you so much... And audio quality and delivery out through the 3 way system is very crisp and clear.. Goo quality overall