6 Port

No issues, works exactly as I expected.

I looked at many PoE injectors, and decided for $34 this is the best option. I initially purchased just one PoE camera, but this switch allows me to add three more by simply running the ethernet cable. What more could you ask for? This switch has a PoE+ port on the first plug, and all four plugs will run at PoE standard power levels. If you need PoE+ you probably cannot use all four, it will limit you to one or two more standard PoE plugs, because it has a maximum power output. There is a switch for Default, and Extended. If you need to run longer than 300 feet you can switch to extended, it will reduce the bandwidth of the PoE ports to 10Mbps, and increase the power, so that it can run longer cables safely. I don't recommend this, just try to use the 300 feet limit, and the default setting and you will be fine. If you have to go longer, I suggest you but another of these, or an individual injector. Then, use 300 feet cable segments with switch/hubs to reach you destination at full speed. My house is all 1000Mbps ethernet. I connect the PoE switch to one of the ports and it runs at 100Mbps with the switch. There are two uplink ports on the switch, not sure why you need it, but you could connect two networks to this, if you so desired. If you are buying a single camera, I suggest skipping the single PoE injectors and getting this. You then have the option of adding three more cameras without needing another injector. The 100Mbps is more than enough bandwidth for the cameras, they usually need about 2Mbps each. Most single injectors are $19. This is $34 and gives you 4 standard PoE injectors with one optionally running PoE+. This is a great deal, and a good choice. Be smart and plan ahead, that is what I did. I just ordered additional cameras today, and I am very glad I purchased this, because I don't need to get more injectors, just need the camera and ethernet cables to hook it up.

works well

I purchased this POE switch to replace the one that I had that died recently. It connected my two WAPS into my network without any problems and works smoothy with my UniFi Network Server application management software. I recommend it to anyone who has network extender WAPS installed.

Great product!!!

I bought one of these for a non-technical friend of mine. The coloured ports make it really easy to explain Other than that, it's a switch. It's powering a couple of Unifi access points. There is a bug in the Unifi controller that throws misleading errors if the switch you plug the APs into is not made by Unifi. I experienced this bug with this switch. It is not the fault of the switch, but maybe this comment will save others a few hours of searching and swapping cables like I did before I found the thread(s) of many users discussing this

I decided to use this for my Ring generation 2 cameras... And I'm glad I did. I was nervous it was going to be a big issue, but it was such an easy setup. My home came pre wired so I installed this in the utility closet and hooked up 2 Ethernet cables to the 2 cameras, then a cable to the router in port #5 (i figured it was worth a shot.). Cameras both got power, so I attempted to have them communicate to the internet over Ethernet instead of wife. To my amazement it worked flawlessly! A great value at $35 whilst 1 ring POE costs $29 and i would have needed two! Now i can add more cameras if i want to and setup will be easy! Great product overall.

works great, 2 uplinks in case one goes bad