Next Level Racing Wheel Stand Lite (NLR-S007)

I got into PS4 GT Sport and after I was convinced I needed a wheel setup[Logitech G29], the next decision was how to mount it. I gave the nearby furniture a college try, but it was an exercise in futility. I know getting the full cockpit setup is the ideal way to go, but I have a space issue and I couldn't devote a place specifically for something of that size. Hence my decision on a middle ground until my obsession grows to the next level. I am very pleased with this stand. I am using it either with socks or barefooted and there has been no movement as it is pretty strong. I'm 6'2 210lbs and it doesn't feel flimsy when I play. I can see the benefits of having a full cockpit setup with integrated chair as that would feel more like natural driving and have less or even zero movement. However my setup is night and day better from using the PS4 controller. This setup will run you @ $350 for the Next Level Stand Lite and Logitech G29 wheel/pedals, versus the Fanatec Elite + Next Level full cockpit @$1000+ I would say this setup gets you a 90% upgrade on realism and play ability. Thanks to Z28gaming for his review on the G29 wheel, it sold me... Pros- sturdy for the price nice adjust-ability includes mounting hardware includes gear shifting mount [I did not use this] includes wrenches for assembly [very cool] instructions were good enough, its fairly straight forward if you have assembled anything. includes Velcro tie downs for cable management [nice thinking] extra parts [is that a good thing :)} Cons- I wish the pedal mounting bolts were hand turn-able, like the height adjustment, as we adjust regularly as my eight year also uses it. You will play more than before, as in the beginning you will suck, due to the learning curve with going from controller to wheel [just qualify and wait until you can meet or surpass your controller times before jumping back into racing] You will play more than before, as after the learning curve, you will love the additional realism and performance you are experiencing. I will definitely purchase again from Next Level Racing, their products are very thought through.

Well built and sturdy, although finish coming off and sicker missing out of box. Bought this to use with my CH Products Yoke and Rudder Pedals. These products are not compatible with the stand out of the box, but it can be modified fairly easy to fit the application. To get a study mount, I measured and pre-drilled two new holes with a laser drill press to accommodate the CH Products Yoke, then I used a piece of 3/4 in oak board and two 45 degree wedges to stop the wiggle from the angled rear portion. This works well, although I would like to see the holes pre-drilled and a "insert" for the angled rear portion of the CH Products Yoke. I think this product would sell like hot cakes if these changes were made. I will update this post with photos.

Just got this the other day and i would say this is built really good and sturdy. It comes mostly complete. Just tighten some bolts and make your adjustments to fit you best and your ready to go in 15-30 minutes. I like the fact that you can screw the pedals onto the foot plate and then you can angle the plate into different positions and slide the plate forward or back to get the fit you feel most comfortable in. Being able to raise and lower the height of the wheel is a plus as well and really easy to do. My Thrustmaster T150 wheel mounts perfectly to the stand which also has plenty of hole configurations if you need to screw down your wheel. One thing which may or may not be a problem for some is the steering wheel upright bar could get in your way if you only use one foot to use the gas or brake pedal. But you can move the pedals around on the foot plate to get the right fit and feel and alleviate the issue. If you use both feet (one for gas and one for brake) then you wont shouldn't have any issues. This folds down easy and can be moved with ease although can be heavy once everything is attached. The only issue i can see which is a non issue for me is that the brand stickers had either fallen off or were almost off.All in all i am loving it and so are my kids.

Bought this stand about 1 week ago and after a few Racing Sim rounds the cheap U bolt locking mechanism just fell apart. The item came and the U bolt was bent and one sides nylon nut was just barely screwed on. I noticed there was some slight squeaking of the upright as I played as well and then as I went to wipe the sweat off my hands from holding the wheel I heard a click and watched the upright fall and the attached photos is what I picked up. The rivet just broke right out so I cant just pop it back together. This is just raw shotty craftsmanship and poor Quality Control on behalf of the maker. You would think at $150.00 a pop they would have someone ensuring the inspection of their products. Had this just happened while my 2 year old was near it this with the weight of the wheel would have done some serious damage. I would not recommend this product and because of the poor QC I wouldnt recommend purchasing from this company.

I am quite amazed how this stand works well and functionality of it. Un-boxing the rather heavy box was easy, and setting it up will take a "few" minuets (30-45 for me) to get it set-up right. - Easy to figure out if you know how mounting works - Fairly heavy (Good for heal-toe, Drifting etc without the pedal or wheel coming off the surface) - Only have a T300, TP3A, TH8A with me so it was easy to mount all three of them to the respected holes. - The overall build of it is metal and strong one at that! - Adjusting the wheel stand to your height. - 2-way shifter mount for lefties and righties. - Can move the pedal potion forward, backwards, and vertical too which is a bonus. (You lose some stability if you decided to lay it upwards) However there is some issues with it... - The stickers on the Stand, they suck. No offence but mine was already scratched up from the bottom and the other one below the wheel mount was already peeling off right after that I take the stand out of the box and moved it up without touching the sticker. Shame since they do look nice. - Adjusting the wheel angle is rather daunting, one of the holes was trim a bit too short so I had to make it wider so I could slant it down a bit to my position, mounting it properly. But these are rather minor compared to the majors. Overall I am pleased with this budget stand! I will recommend to anyone who have a modern wheel and need's a cheep mount, But I don't know about the older wheels though (2010 and below).

Came mostly assembled very easy to set up and nice and sturdy well build and fully adjustable I am 6'2" and it fits me perfectly. Strange that Thrustmaster added bolt holes on the pedals which you can mount to the foot plate with bolts they provide (lots of bolts for different wheels/pedals) but not to the wheel itself the normal locking mechanism on the TMX wheel locks right onto the base tightly but I wish Thrustmaster would have put bolt holes on the wheel. Only problem I am having is with my chair this thing is so sturdy and sits where you put it that I am constantly rolling away from it need to find a way to lock my chairs wheels lol.

The stand itself is solid in construction and features for the price. Mine came with a small wobble . I made it work and fixed it but I had to put a spacer under one corner used for furniture. Just a pain to have to do that. Other than that it is solid.

Setup instructions are horrible. Doesn’t explain anything at all or help you in any possible way.

Esta muy bien como un primer soporte, es de muy buena calidad, entero de metal, lo cual lo hace algo pesado. Se puede plegar, lo cual lo compacta un poco, pero si no llegas a quitar el volante y los pedales de el, sigue abultado bastante. Yo encontré que lo mejor para "hacerlo" desaparecer, es colgandolo de una pared, usando colgadores de bicicleta. La altura del soporte del volante se puede ajustar bastante bien, y a diferentes alturas. Y la profundidad e inclinación de los pedales también, aunque es algo mas engorroso, ya que hay que tirar se herramientas, pero en 5 minutos se puede hacer.

Great, easy to set up. Quite sturdy. Does slip a little on carpet but otherwise it’s a good rig for the price. If you are grabbing a Fanatec wheel make sure you have a 3mm hex key to take the foot pads off as that will prevent the wheel from being mounted to the frame. Easy to fix, takes less than a minute.

Finally a relatively small stand to just set up and put away. Great product very sturdy easy to assemble, and a great way to play your racing games!!

Je suis bluffé. Pour à peine plus de 100€ la qualité de ce support est juste incroyable. Très lourd, patins antidérapants, visserie impeccable pour mon G923, possibilité de régler le pédalier au petits oignons, peinture PVD qui a l'air bien résistante, support pour shifter inclus, clés alène et même une clé à écrou en vanadium (!) dans la boite pour tout monter sans avoir besoin de sortir le moindre outil, serre câble en velcro, reçu parfaitement emballé dans un double carton. Je savais que Next Level racing était une marque sérieuse et réputée, mais là j'aurais sans problème payé bien plus cher pour ce niveau de qualité pour ce qui est un stand d'entrée de gamme pour eux (j'ose à peine imaginer la qualité de leurs cockpits complets). utilisation sur carrelage et les patins font leur boulot : ça glisse pas. Volant stable même avec FFB important, mais je pense que ça risque d'être limite si vous utilisez un frein à main (passez sur un des modèles du dessus dans ce cas). A acheter les yeux fermés si c'est pour débuter, le rapport qualité/prix est à mon avis complètement imbattable. PS : en lisant les autres commentaire, je confirme que j'ai bien reçu une version Lite et qu'elle était parfaitement neuve

Har inte monterat ännu men är besviken över att den ”nya” produkten redan när vi packade upp den ser väl använd ut. Sliten och repad.