AZZUNO 135A MIG Welder 110V, 3-in-1 Flux Core MIG/Lift TIG/Stick Welding

I am a professional welder of 15 years. Now why would a professional welder be buying this? Well, to make a long story short I’ve got to do a quick little job but I’ve got to get on a plane and fly to the location and since I can’t take my Lincoln welder I needed something small and light that can fit in my luggage without going over weight. The job calls for 1/8 fillet welds so I don’t need any big equipment anyways. I could rent some equipment for 4 times the price per day so that doesn’t make sense. Anyways my hopes were pretty low for this welder. It came in the mail pretty quickly. The plastic latch on the door was broken so the door doesn’t stay shut. Oh well, I don’t have time to return it and get another one. So before I catch my flight I figured I’d put it through its paces and see what I can weld with it. The auto set feature is actually pretty accurate. Meaning it sets the volts and wire feed speed based on the amperage you select. It was pretty dead on for the selected range of amperage. However I doubt the amperage is what you set it at. Meaning I set it at 75 amps and it felt less than that. Although that could be just an opinion I didn’t test it with an amp meter. I cranked it up to 135 amps and that felt more like 75-80 amps to me. But really what do I know if I didn’t test it with a meter? Bottom line is I like it. I won’t use it much in the future because I’m a professional and this welder doesn’t make you look professional. But it works well, will serve its purpose for this job, and it can pack well in your luggage if that’s what you’re looking to do.

Have only used a few times, so longevity can't be determined. But it works very well and is tiny. Nice handy little welder to do basic welding with an impressive 135 amp. So far I like it.

Was an easy five stars until now. I was so impressed at the quality of these units I purchased 4 total for my shop. Out the box very easy setup and welds great but one out of four gave me trouble. The wire feed would remain at same speed (extremely slow) regardless of adjustments and now it does not feed anymore. I've reached out to azzuno with no response. Hoping the other 3 continue to work as they have been. I want to purchase the 200-a but am on the fence now. If the 1yr warranty was honored I wouldn't hesitate to buy. These are so good out the box I still may purchase the larger 200-A unit. It's sitting in my cart just cannot pull the trigger ....yet 3 out of 4 I give 5 stars ***Update*** reached out to Azzuno through Amazon and they quickly resolved the issue I had on 1 of them. Excellent support along with an excellent product. Don't hesitate to buy over the big brands! If you need a lightweight portable welder to tackle light welding this is it. Changed to ⭐⭐⭐⭐⭐

Probably your best bang for your buck. For a 110 it has plenty of power for small jobs. Been welding for a few years and decided to get a small one for small projects. All tho it welds good. The stick arc is inconsistent but controlled. Stays at steady burn but then will shoot up to a high burn and then lower. For the mig aspect not very happy. Unfortunately you will have inconsistent wire feed wich can lead to a sloppy weld. Also the wire gets jammed in the line a lot. Other than that very shocked about a 100 dollar welder. Obviously not as good as my EastWood but it will get the job done and is perfect for beginners. 👍👍👍👍

purchased in 12/23 and haven't had any issues with this welder. Except I laid the wire feed stinger led across some hot welds and melted it. ALL MY FAULT... Ordered a new wire feed stinger and up and going again , I build a lot of 8' round hog traps ... well worth the price, thanks

Have used many time so far with no issues not a professional by any means just learning and it has been pretty simple with this machine

Wire feed mechanism = garbage Cheap internal brittle plastic parts = garbage Connection sockets loose after one use, and plastic nut was cracked = garbage Digital display turns off and on at random = garbage. Solution = Don't buy cheap overseas garbage.

I have an old school datsun 720 ive been fixing up and ive been using this to weld patches on it. A couple pieces of plastic have broken off the machine since I've accidentally stepped on them but it still works regardless, just had to ziptie some of the pieces back together. Been using this thing almost 7 days a week for 1-2 hours for about 3 months now and its still going strong. I use the mig setting and one thing that was weird is that it used to stall the wirespeed at 45 for the first 2 seconds that you hold the trigger and then after that it will start spitting out the wire at the speed setting you set it to. Not sure what I did to fix this but it doesn't happen any more. Was a little annoying for a while there. But all around can't beat the price for a solid little welder!

Great product