Dremel 3000 Rotary Tool 130 W, Multi Tool Kit with 1 Attachment 25 Accessories, Variable Speed 10.000-33.000 RPM

Excellent product easy to use

I have to admit that I’m surprised it’s still going, my power tools tend to take a beating and I’ve already gone through so many cutting discs. I destroy the proper heavy duty tools like grinders and drills and decided to get a proper Dremel because a friend who’s much more careful with their tools said they ended up with one because all the other rotary tools they used failed. Well, sometimes I’ve been lazy and instead of fetching my angle grinder when I had the Dremel at hand knowing that it’s really a job for the angle grinder, I used the Dremel to cut through 3cm thick solid steel (yes cm not mm), sure it took some time and a few discs and it got very warm but it did it! Then I decided to grab the grinder because I had to make another cut in the same metal bar and that went through its brand new disc in the one go and became very hot, it wasn’t even an easy job for the angle grinder I do a lot of different kind of work like welding/metalworking, woodworking, custom fitting kitchens, bathrooms, all the tiling, car interiors, etc. so I’ve made full use of all of the included attachments which are great I liked that this one came in a tidy organised box and with a decent selection of attachments, I did order more official Dremel cutting discs and their little wire brushes which I haven’t tried out yet I think one bad point is the combined power switch and speed switch moves very easily and doesn’t lock in the off position, so for example if you don’t realise it’s actually turned on and plug it in or accidentally knock it and it slides into an on position it could be dangerous I wasn’t sure if this would get much use, if it’d be a waste of money and whether it would be better to get a cheaper rotary tool for the specific job I wanted this for at first. Well I don’t regret it! If I need to get a new one in the future, I’ll definitely get a proper Dremel again but I’ll get the best one available because it’s done so much already, pretty much every job I do I say I’m going to grab the Dremel and I’m sure no other rotary tools could survive what I’ve already put this through I was concerned it would be sitting unused in a corner of my storage room forever after the one job but it’s in use nearly every day

I used to have a multi tool but this time decided to go with Dremel and I have to say it is very good quality and a pleasure to use.

I am new to these things so this is not an "expert review" by any means, I also don't do loads of DIY, and have far from explored all the possible uses. In the small amount of time I have had it it has proven useful for small polishing / cutting tasks, and it comes with a few attachments to get you going which is handy - and good at the price point. One criticism I do have is it does not seem all that powerful, I quite fancied a battery operated unit, but they were significantly more expensive, and I have had some poor experiences with battery powered stuff either having too little Ooomph or the batteries not lasting very long so have gone back to mains power lately.... ...But this does seem a little weedy to me, not awful, but you cannot apply very much pressure at all before the motor slows and feels as if it is straining, but could be what they are all like, or me expecting too much, makes me glad I went for mains power though as it has more zap than the battery ones (on paper) The storage nox is also a neat touch with room for some attachments and tools. Would recomend

Ah, the illustrious Dremel 3000 Rotary Tool – a versatile marvel that danced its way into my toolkit and my creative endeavours. Allow me to regale you with the tale of this miniature powerhouse, a tool that's proven to be a true game-changer in the world of DIY and crafting. At first glance, the Dremel 3000 exudes an air of compact confidence. It's as if it's saying, "I may be small, but I pack a punch!" Armed with an array of attachments and a spirit of curiosity, I embarked on a journey of craftsmanship, ready to see if this tool could live up to its reputation. From the moment I fired up the Dremel 3000, I was greeted with a symphony of whirs and hums – the harmonious melody of a tool in action. Whether I was engraving delicate designs on wood, polishing a once-dull surface to a dazzling shine, or even tackling the intricate details of a DIY project, this tool proved itself to be a versatile virtuoso. But let's talk attachments – the Dremel 3000's entourage of accessory options is nothing short of impressive. From grinding and cutting to sanding and routing, it seemed there was no task too daunting for this pocket-sized powerhouse. And the best part? It handled each challenge with the grace of a seasoned performer, leaving me in awe of its capabilities. One might assume that such power and precision come at the cost of complexity, but fear not! The Dremel 3000's ergonomic design and intuitive controls make it as user-friendly as a friendly neighbour. Changing attachments was a breeze, and adjusting the speed allowed me to fine-tune my creative escapades with ease. In conclusion, my fellow craftsmen and craftswomen, the Dremel 3000 Rotary Tool is more than a mere tool – it's a ticket to a world of endless possibilities. From intricate detailing to robust grinding, it has transformed my DIY dreams into tangible masterpieces. So, if you're ready to embark on a journey of creativity and precision, look no further than this compact companion that's ready to turn your projects into works of art.

My old mini-drill died and so I looked around for a replacement. When I bought the previous mini-drill I hadn't appreciated that mini-drills are fitted with a collet rather than a chuck and as such only accept a single diameter bit. One of the reasons I opted for a Dremel is that the collet can be swapped for a chuck so it can be used as a drill (for multiple diameters). The chuck is available separately. The build quality is excellent and it quickly becomes apparent why you have paid more for this tool. It is well designed and some of the accessories are fitted with clever mechanisms to both speed up attachment and stop slippage (a common problem I have previously encountered with cutting discs). This model came with a good selection of accessories and having used it for a little while I think that I didn't need to pay more for either a more powerful version or more accessories. My wife has relatively small hands so a factor in the purchase was the size of the tool so that she could also use it. It is a compact design which both she and myself find comfortable to hold. Too early to comment on longevity but it seems well built and given the Dremel reputation I have no doubt that it will last many years. I signed up for the free extended Dremel warranty and was surprised to find then Dremel sending me daily emails. However some of these are useful giving guidance and tips on what is included rather than marketing emails trying to get you to purchase more items.

Great bit of kit

perfect

- لا يعمل على السرعات من ١ إلى ٥ - فقط يعمل من سرعة ٥ و اعلى - سنة التصنيع المكتوبة على الجهاز ٢٠١٨ - قطعة البلاستيك الداخلية لتثبيت الكيبل مكسورة - تم ارجاع المنتج

Ha una spina americana non utilizzabile in Italia non c’è neppure l’adattatore mi toccherà sostituirla probabilmente perdendo la garanzia: pessimo.

Perfect for diy engravibg. I use this to make my own seal on brass material. Been using continuously gir several minutes to an hour and the performance is great. I wish i bought the cirdless thought because this thing is bulky.. but great!

Fantastic product. Even if the box is broken, don’t complain because the remaining product is healthy. Hope Amazon will publish this Non-profen remark. Hope it will help build a GREAT MARKET IMAGE too. What a Product

Good product...sturdy material...so far it's cool...