Fractal Design Focus G - Mid Tower Computer Case - ATX - High Airflow - 2x Fractal Design Silent LL Series 120mm White LED Fans Included - USB 3.0 - Window Side Panel - Black

Plenty of room, cables fit easily, I didn't even ziptie them down and the back panel slid on with no trouble. Cable managment is decent, only ones I can see from outside are the GPU and MOBO. Airflow is great, lowered my temps significantly though I put the 2 fans on the back/top pulling out (ik, not ideal, VRams overheating and that gave the best cooling till I can buy more fans) Plenty of room, Have a cooler master 212 and Morpheous 2 cooler (980ti) and they have plenty of clearance. The front filter is quite easy to take off if you'd rather have the extra airflow, you just bend the tabs straight, slide it out, remove the filter, put the mesh back on and push the tabs back/tighten them with pliers, 5 minute job. The blue is a great colour. I really really like the blue. It's like, it almost looks like a stock office case but then it's full of little quality touches, it's really nice but not extravagant, understated. Comes with more screws than you'll need and a handy little tool which makes installing the mobo standoffs easy. very nice touch and much appreciated (though I forgot about it till I'd put them in already) will easily fit a watercooler Improvements that I think would perfect this case Make the 5.25 bay removable, can't see that bumping the price significantly. (I'll just drill cut mine out which is easy if you have a drill, dremel and a steady hand) plus will allow an extra 140/120mm fan on the front. Add more points on the rear to zip tie cables (very little extra cost in this step) The panel screws on the rear are a bit finicky, not much of an issue, especially for someone who barely opens their pc, but improving them a little would be a nice touch. Overall I highly recomend this case. If you just want a quality, good looking high functioning case without spending £100+ this is it. Keep up the good work Fractal, you're cases are above an beyond, You're engineer and artist are either the same guy or both have a solid understanding of PCs, thank them both for all us poor gamers who can now put another £50 towards a new watercooler to OC the balls of our aging i74790ks.

Lots of room and easy access from both sides, a great base to start a build. The two front 5.25 slots are a rare thing nowadays but they give you great options to house any breakout boxes you may have. I used mine for an optical drive and Sound Blaster front panel break out box with midi connections. Lots of fan placement positions for various sizes around the case to suits all kinds of builds. My only nag would be to include a 2 to 1 connector for the front fans as extra connections on the motherboard may be limited. The included fans are nice and quiet and will get you up and running. Nice quality build with some quality materials, it feels really sturdy. I'm going to be using this style case again for another build it was so impressive.

I bought this case as my graphics card was suffering with high temperatures and I had always wanted a white case as I think it looks more modern and cleaner. Installation was tricky and it took me a few hours to put everything together and try keep it tidy. I initially struggles with the brass standoffs as they only turned halfway then required brute force to fully screw into the case. I ended up with a big blister doing this as the case doesn't offer enough room to use a wrench. I got everything installed and the case offers a decent amount of size and is fairly Intuitive in terms of layout. Unfortunately cable management at the rear of the case is severely hampered by the bizarre decision to not have the rear case wall featuring a depth area to allow cables to hide behind. The rear case wall on my case simply won't shut now due to cable thickness, which is a real shame as the interior is very clean and clutter free. In terms of temperatures and airflow this case is brilliant, easily the best I've ever used. My gtx 980ti at full load is under 50c which for an air cooled graphics card is frankly unbelievable. Given this was my main reason for using this case, I would say the benefits outweigh the drawbacks but I wouldn't look forward to using this case in future if building for someone else. Pros: Excellent airflow Aesthetically beautiful 2x 5.25" drive bays for disc drive/fan controller Low price case Cons: Motherboard standoffs extremely temperamental to install. HDD caddy is too close to front of the case meaning you cannot use a 4th fan on a front 240mm radiator. Rear cable management is impossible due to no depth from the rear case cover and virtually no cable tie anchor points. Only 1 SSD mount point on the rear. All in all I would say the benefits of this case in terms of looks and airflow/low temps outweigh the negatives given the price, however be prepared for a frustrating build if your looking to do some cable management.

Pris pour remplacer un Carbide 100R qui ne pouvait pas contenir un watercooling à 2 ventilateurs, je suis franchement pas déçu de mon achat. L'espace à l'intérieur est beaucoup mieux pensé que sur le Carbide (notamment avec les disques durs un peu éloignés de la façade, ce qui est meilleur pour le airflow, et un emplacement de ssd derrière la carte mère) et l'aspect général du boitier me plaît plus (les materiaux semblent plus solides et les finitions mieux faites en général). De plus le Focus G est livré avec deux ventilateur préinstallés en façade, un point de plus pour le airflow qui a en majorité fait la réputaition de ce boitier. Seuls bémoles (très légers d'après moi) : il y a peu de place en back pour le cable management, celui ci pourrait s'avérer retors si votre config est blindé de câbles (j'ai eu un peu de mal à fermer la mienne mais rien de bien méchant) et les vis des panneaux latéraux qui sont un peu étrange et peuvent être un peu galère à aligner lorsqu'on veut les revisser (encore une fois rien d'insurmontable, ca m'a juste pris 10 secondes de plus mais j'ai vu des gens s'en plaindre alors je le précise quand même) Pour résumer : Un très bon boitier full ATX, vendu avec 2 ventilateurs déjà installés plutôt efficaces, un très bon design aussi bien au niveau visuel que ergonomique, et des défauts très mineurs bien loin de tarir l'image de ce boitier à mes yeux. je recommande !

This is Kevin, spouse of Nancy! This is a low cost, MID TOWER, practical option for a good build. See my last photo of an Amazon product that costs over $150, is the PERFECT case for a high end build. The Fractal case has some of the same qualities for 1/3 the $. The window is NOT Plexiglas, so be careful. The cable space is limited but the right side panel has a good size bulge that accommodated my cables. I am trying to address the (somewhat nitpicky) issues posted before. Please keep in mind I have been an amateur computer builder for over 40 years. I started with MS DOS, then Win 3.1, 95 ect so I have some talents and observations. 1. Not every Amazon product will be in PERFECT order. That’s why we have Prime, if it ain’t right send it back. The stand off screws WERE a problem I simply replaced them all with the ones provided or my own. 2. If a Fractal part failed under warranty it looks like it was replaced quickly So why the 1 star except for frustration. 3. The front cover panel detaches without having connectors attached like some other cheaper cases. 4. There is ample room for a decent power supply. 5. The three fans are good quality white lighted LED’s and have three pin (not 4) MB connectors. 6. The front cover will allow for 2 5.25 inch DVD or other mounts. I have a 2.5 inch slide in SSD/HD mount so I can change OS’s. 7. The base has good dual 5.25 inch mount for 3.5 inch hard drives and removable slide in 2.5 inch brackets (2). All in all it’s a GOOD, not GREAT, case for most builders. I use the Fractal as a back-up for my gaming rig which is a Phanteks Eclipse P600s. Questions or smart remarks please email me at [email protected]

Im Alten Gehäuse wurde nach CPU upgrade die neue CPU Ryzen 7 5800x zu warm ! Einbau war Selbsterklärend mit Englischer Anleitung und Bildern. War OK geht aber bestimmt besser! Nichts wackelt oder wirkt Billig! Auf meinem alten Mainboard gibt es nur einen Gehäuse Lüfter Anschluss, deshalb habe mir jetzt ein Y-Kabel bestellt damit ich beide Lüfter anschließen kann, es war nichts im Packet dabei. LED der Festplatte ist wirklich sehr hell wie einige schon in anderen Rezessionen geschrieben haben, werde ich mit irgendwas überkleben. Die Kabel lassen sich gut verstecken in diesem Gehäuse ,aber es ist schon etwas fummelig aber dafür passt alles rein und nimmt nicht viel Platz unter oder auf dem Tisch ein! Gehäuse wurde wegen den 2x 5,25 Schächten gekauft damit mein DVD Laufwerk wieder einen Platz bekommt! Für mich ist das Gehäuse optimal und ich würde es wieder kaufen. Erstes Bild ist durch die Plexiglas Scheibe! Beim letzten Bild habe ich z.b. die beiden Stecker markiert die mit meinen Händen schon etwas schwieriger zu stecken waren, wenn der CPU Kühler wie bei mir schon montiert ist. Im Moment ist nur der oberste Lüfter aktiv deswegen leuchtet der untere noch nicht! Hoffe meine Rezension kann euch eure Kauf Entscheidung erleichtern.

デザインもかっこいいですし、作りもしっかりしています。ホコリも入りにくい感じで、3ヶ月ぐらい使いましたが、埃まみれということはないです。

Do remember that it appears in reality to be a full size case.