Epoxy 25ml

Sole came off my boot so I thought I'd try using this and I'm so glad I did. I wear these boots almost every day in all weathers and the sole has stood the test of time and endurance (4 months and still secure). I've also used the resin to fix together a broken garden ornament and a hand rail. Fantastic stuff and very easy to use. I would highly recommend

This stuff is fantastic for securing items together, I've used it so far on airsoft red dot turrets of various alloys, and on plastics and if you mix it well enough for a minute before a thin application and applying the items together with presssure ie clamps you get a solid result. My once broken in pieces vector optics red dot sight now has a functional windage turret thanks to this product, I've also used it at work as a electronic repair technician to perform solid repairs on a few polymer products which needed bonding and reinforcement that could not have pressure applied and it's held up very well. One/if not the best general use epoxy i use and will happily recommended to anyone else! It mixes well, adhesion is fantastic and it can be applied to a wide range of products, for its value and price you'd be a silly sausage not to get some of this as it dries and cures fully very quickly and is very applicable and easy to use.

The Gorilla Epoxy 25ml turned out to be a solid choice for small repairs and DIY projects around the house. The bond strength is impressive once it cures, it holds firmly on everything I’ve tried so far, including metal, plastic, and ceramics. I like the double-syringe design too; it keeps the resin and hardener separated and makes it easy to dispense equal amounts. That said, it does require a bit of patience. The working time is short, so you need to be ready to go as soon as you mix it, and the full cure takes longer than some quick epoxies. The cap can also get a bit sticky if you don’t clean it properly after each use. Overall, though, for the strength and reliability you get, it’s a great epoxy. Just be prepared for a little extra cleanup and setup. Would definitely buy again for tougher repair jobs.

Used to fix a broken headlight support in a 2016 mini. BMW wanted £2000 to replace the light as the support arm had broken. This glued the support arm back together. Simple to use and saved 2k. So happy happy chappie.

Great strong and clear when set

It was pretty costly, but I needed it for an urgent job. It was very easy to apply. It did the job. Highly recommended.

Its a good glue that you mix up and it sets hard. Can be messy to use.

Easy to use eproxy. Easy to use with the two parts separated in their own tube. With one plunger to make sure you.get the same 1:1 mixture. The packaging is the mixing tray and there is mixer/spreader in the plunger, so you have everything you need to get going. As it is a quick drying eproxy that is clear when mixed and there is not much mess as it is a thick mix, if there is a bit of drip as long as itnis wiped up right away it is fine. The cures within 5 minutes to touch dry and I would.givw it 24 hours to fully cure. This is good for small repairs or strong glue is needed. I fixed a few hairline crack on a marble chess board and to re attachment the fort brass legs to the marble and i had plenty left over. So I did what any good DIYer does I glue another half a dozen things together what I had been putting off. And everything stuck like a charm Value for money is good if your.doing a small one off job for sure.