LK 2 Pack for Google Pixel 7 Pro Screen Protector 6.7-inch + 2 Pack Lens Protector with Positioning Tool, Self-Healing TPU Film, Touch Sensitive, HD Ultra-Thin

Very nice kit for my Google Pixel 7 pro. I am amazed at how easy they made it to install. The kit comes with a jig that basically aligns the screen protector for you. All you have to do is peel and squeegee. This covers the curves edges perfectly! The screen protector was completely on there within a few minutes!!! The edges and corners did not peel like others I've tried. The screen protector actually covers the entire screen. The quality of the protector is excellent! It is crystal clear and I do not have any issues with the fingerprint reader. Also, it seems as though this screen protector tends to stay cleaner than the previous screen protector I had on this phone. It feels very smooth. This kit also came with the small camera lens protectors. These for sure you have to use your eyes and hands to properly align with the camera itself, but it wasn't that difficult. The kit came with two screen protectors, two camera lens protectors, two alcohol prep pads, too sticky lint cleaners, one lint free cloth, and the plastic jig that aligns the screen protector for you. I am overall very happy, and I highly recommend this product.

By FARRRR the best screen productor I have purchased with GREAT instruction and installation kit so it is EVEN all around. Buy it you won't be disappointed.

I managed to apply this protector perfectly first try. I previous had two $55 protectors that didn't work out. The expensive one wouldn't sit right and had massive amounts of bubbles I couldn't remove and the sides didn't sit well. I wasted $110 on nice expensive protectors. I bought these cause I've used the brand multiple times for iPads, Kindles, Switch, 3DS, PS Vita, Pixel 3a XL, Samsung S5 and S7. I never had one go on badly and always a perfect fit. They saved my devices multiple times over and I still have yet to bother replacing them they clean up and look new. Zero bubbles from this brand using my extra steps to ensure no dust as much as possible. I say I'm not a huge fan of TPU I'd rather have glass. I had one small fabric piece land just inside an edge. I picked at it and the TPU tore leaving a very small tear on an edge. I'm not to concerned about it since it was the only spot but I know the screen won't try to lift up due to the tiny air pocket. Best part if it does I have an extra so least I can do it a again and for less than a 5th the price of expensive protectors. I bought two packs just encase so I have 3 left. This has to be the best and easiest application method so far. I might have bent it too much but I got the lines out and they don't show up when it's on. You only see them when it's off and shining light at the perfect angle. Also I can just pull it off and try again later. If anyone has trouble with bubbles and dust I highly suggest this method: 1) Turn your shower on for a bit to humidify the bathroom. This will draw the dust down and less will float in the air. 2) Keep door closed and shower running while you do the assembly on a flat surface to keep it humid and mirrors fogged up. I just use an old mouse pad over my closed toliet seat. If you have counter space the better. I have not had an issue with dust or bubbles doing the above. Just work over a clean flat surface. I've placed towels over my sink and laid a book on top that to make a flat dry surface as well.

So this comes with a piece of card board and has two separate films to apply, which makes it a lot easier to avoid bubbling the screen protector. It also has a guide frame for where to put the protector and comes with a grip mat for your table so it should slot into place. Like a lot of people have said, watch the install video on this page before putting it together, but that's three minutes. And it covers installing the camera cover. It's super short. For install: definitely do this on a flat firm clean surface. And don't make my mistake of letting your cat hang out nearby. The process is pretty idiot proof but it's not cat proof. It comes with a second set so you can do it again if you mess it up, or you can retry if you're okay with a few little bubbles. I managed to retry it and actually didn't have an issue with bubbling--that little piece of cardboard is pretty handy and perfectly sized. Took me like, not even 10 minutes. Would probably take someone else like 5--and that includes watching the video. The screen protector itself works pretty well. It's held up against cat teeth already and being thrown off my nightstand every morning in bids for attention, so I definitely recommend it. I didn't have to re-add my fingerprints when I installed it and aside from minor bubbling that was (again) my own fault, I haven't had any issues.

I have never before bought a screen protector for a phone that was as low quality and needlessly complicated as this one. I watched two separate installation videos from the company, the first one at the link on the product itself, and the second one after looking on their youtube channel for a video specifically for my phone. In both videos, the product I received and was trying to put on is COMPLETELY different than what they're showing! (the product applications they show in their videos *make sense*, it's straightforward and what I'd expect from the overwhelming majority of screen protectors in their application. What I got was the exact opposite) Start to finish, standard pack of alcohol wipes, microfiber, and dust remover stickers. The dust remover LEFT RESIDUE on the screen!! Leads to an endless cycle of: wipe it off, oops now there's more dust on it. I have NEVER had another screen protector's kit do that to the screen. The kit also came with.. I don't know what it's supposed to be, some white piece of plastic that you shove into the USB-C port, maybe some kind of guide? I have no idea how it's supposed to function as one, it's not shown in either video I watched. All the videos show a big piece of plastic the size of the phone being used as a guide, noticeably missing from this kit. I don't know what this dinky little white plastic thing is supposed to be. The screen protector itself has some green adhesive strip on it, one side of its cover peels off easily, the other not so much. After getting frustrated trying to figure out how this is intended to be applied to the phone and the covers peeled off, I decided to just take them all off and try my best to just get it on the phone. The cover on side the adhesive strip is on is SO HARD to peel off that I began tearing it in half before it even came off! After dealing with that, I'm finally greeted by the actual screen protector... it's a f***ing flimsy piece of plastic! Nope. I'm not even going to try the second one, this is nonsense. Find another screen protector, this ain't it.

I've had cell phones since they were bricks in the 80's (when "brick" had a different meaning for cell phones because they were about the size, shape and weight of an actual brick). I've had many phones and applied many screen protectors and every single time I've bought them I've had to make sure I had multiple screen protectors because they were such a son-of-a-gun to get on flawlessly the first shot. Such a pain in the posterior to get them on perfectly and without mass bubbles. It always took at least two tries with how clingy and unwieldy they were for me and so on. But Not This One. This screen protector went on like a dream the first time and very quickly and easily—and with NO bubbles whatsoever. It seems to be very durable material and it fits the screen perfectly, including over and down the curved screen edges. No bubbles at all and easy-peazy installation with their application system. Totally seamless fit. Plus, the finger slides over the material like it's still just the glass, the touch sensitivity was not impacted in the slightest, and, I did not even have to redo my fingerprints. The camera lens protector was a little bit more of a challenge but just make sure that you have very good lighting to line it all up before you apply it and it will go on perfectly as well. Two thumbs up and a bag o' chips!

I bought this for my Google Pixel 7 Pro. The issue with curved edge phones like the Pixel 7 Pro is that true tempered glass screen protectors do not exist due to technical limitations of tempered glass and curved edges. If you want a screen protector that: - feels more slippery than glass (better for swipe texting) - feels like glass (imo it feels a tad *better* than glass), - doesn't feel "plasticy" unless you try to press your nail into it (it squishes in and recovers after you depress, which is the intentional with TPU screen protectors) - has a pretty flawless, foolproof application method to not have any air bubbles on the first try then this is the product for you. Cons: a little harder to clean for deeply pressed oils. Because it's not glass, you have to wipe in circles with your microfiber a few times before it lifts deeper oils/smudges off the screen. I noticed this when I used the yoga-mat grid cushion on the screen side while I applied the camera glass protector. Because I was pressing down hard to make sure the camera protector adhered well, the mat pressed into the already-applied screen protector and left a grid like pattern on the screen. A few wipes and a little more elbow grease than on a glass screen/protector and it was back to new. I did notice that basic fingerprints come off of it in 1-2 swipes (as if it was glass) so that's excellent.

The package came with no instructions. We used a YouTube video with a different varient of the same product line to determine application steps. My screen protector applied successfully. I have no bubbles. My daughter's screen protector has several small bubbles. It does not appear to affect function, but it is irritating. Our camera protectors were applied successfully. Time will tell if they hold up or come off easily. Our experience seems to match the general consensus in the reviews.

They work as intended there is no issues installation pretty straightforward the kit is actually really good it comes with a little plastic tab that slides or slots into your USB C charge port and keeps everything aligned.

Ich habe bei meinen letzten zwei Telefonen (Sony und OnePlus) wegen der gebogenen Displays kein Panzerglas mehr verwendet. Ich hatte das zum ersten Mal beim Telefon davor (auch Sony) und das Glas passte natürlich nicht zu 100% drauf, aber das war vom Design her so vorgesehen. Fand ich trotzdem nicht ideal. Mit dem neuen Telefon kamen dann jetzt diese neuen Folien. Beim letzten Telefon - OnePlus - habe ich nie bereut, kein Glas verwendet zu haben, da das Display nie richtig in Gefahr war. Das Sony ist mir drei Stockwerke nach unten in den Keller auf Betonboden gefallen (über ein paar Abstecher des Eisengeländers, fragt nicht), da hätte auch das Panzerglas nicht geholfen (zum Beispiel war durch den Aufprall trotz Schutzhülle die Rückseite gebrochen). Wie auch immer, mit dem fast 1000€ teuren Pixel 7 pro wollte ich mal wieder auf der sicheren Seite sein. Ich habe beim Kauf der Folien das Installationsvideo angesehen. Wer je Panzerglas selbst appliziert hat, weiß, dass die Ausrichtung Glückssache sein kann. Oder das korrekte Auflegen der Klebeseite (jaaaaa, fragt nicht). Oder das Kameraloch... Egal, hier gibt es dieses Problem schlicht nicht. Man hat ein Tool zum Ausrichten, eins zum Glattstreichen und ein Reinigungskit, fertig. Man kann es faktisch nicht falsch machen. Großartig. Es gibt ein paar winzige Blasen am Rand, ich gehe davon aus, dass die verschwinden werden, wie beschrieben. Die Oberfläche der Folie ist gleichzeitig glatt und unrutschig im besten Sinne, schwer zu erklären. Die Kamerateile habe ich nicht benutzt. Ich hoffe, ich muss hier nie reinschreiben, ob die Folie ihrer Schutzfunktion ordentlich nachkommt, aber wenn das der Fall sein sollte, ergänze ich hier. Installation, Passform und Haptik ist bisher 1A, nichts zu meckern. Update: Schön mit Display auf die Fliesen geknallt, yeah. Nix passiert. Aber ich habe auch eine Schutzhülle und bitte macht das nicht nach zum Testen, aber bisher Daumen hoch!

I didn't have especially high hopes for this screen protector but having seen a video recently about how easy it is to scratch the Victus glass on the Pixel 7 Pro I thought I should take some precautionary steps to minimise the risk of scratching the screen. I was pleasantly surprised, as having watched the installation video very carefully, I was able to apply the screen protector without any difficulty and, unusually, without trapping any dust or other particles. With the screen protector in place it is barely noticeable and feels very smooth to the fingertip. The fingerprint scanner still works perfectly and although suggested in the instructions I did not need to invoke the screen protector setting. A further significant benefit is that it works perfectly with the case I use, a Quadlock Mag case without the case interfering with and lifting up the edges. The only slight concern I have is that the protector for the rear camera completely covers the lenses whereas it would have been better to have left holes. I am worried that the camera quality may degrade but I will keep an open mind for now. Some reviewers have mentioned that it looks ugly but with a case on it is absolutely fine aesthetically.

Ces films LK de protection sont toujours au top. Ça fait des années que je les utilise sur différents smartphone. Cette fois si c pour un pixel 7pro. Facile à poser en respectant les étapes (voir la vidéo de pose du fabricant). Aucun défaut, s'adapte parfaitement au modèle, et le film ne se décolle pas dans les coins avec une coque. Vraiment je recommande.

Le carátula de protección para un teléfono Pixel 7 profesional es perfecta, salvo que es un poco cara