OEM Rear Back Glass Replacement for iPhone 12 6.1 inches with Reparing Toolkit and Pre-Installed Adhesive (Blue)

Took me a while to install, and I ended up breaking the wifi antenna in the process (completely my fault). Be sure to get rid of ALL of the glass, especially on the edges. I used an xacto knife to do this. If the surface is not relatively flat, the glass will break as soon as you put any pressure on it. Learned this the hard way on a different phone. As long as you do this, which will take a while, you will be fine. I added a bit of glue to make sure it seals well, but this isnt necessary. Definitely worth it in the end. Would recommend to anyone who is willing to put in the time and effort.

Great quality, clarity, fit, touch sensitive and ease of installation guarantee

Why spend hundreds of dollars to fix or replace a broken phone? Just do it yourself. Whit these replacement parts you can. They are inexpensive and just as durable as the original parts. The tools are provided to complete the task. Take your time and make sure you select the correct items to match your phone model. There are instructional and tutorial videos available also to help you along the process. Save money and time by being your own repair technician. You can’t go wrong.

Good replacement kit the tools inside are really helpfull for home replacement

Perfect!! So easy I did it myself with no issues.

First off, glass backs are STUPID. When they break you are in it now. They are SUPER HARD to remove and almost impossible around the edges and the back of the iPhone is fill with landmines. You can very easily mess up your phone. Do you research and watch a lot of videos. You will see some people use lasers to remove the glue or have a glass breaker. Positive: -Good part for the money. -The tools are OK. (You really need a glass breaker) Negative: -You phone is likely not water proof after this. (There is no adhesive around the camera area or edges. The tape is not a perfect seal. Get some sealing glue for the edges of the frame and around the camera area.) -You need a glass breaker to smash the glasses into very tiny pieces so it is easier to remove the glass around the edges and camera area. Tips: Watch out, there are a lot of components in the back that you can easily break. The wireless charging magnets and coils is very fragile. I did not damaged my coil, but broke three magnets and dislodged 3 more. So I just taped them all back on individually and then covered the whole coil and magnet with shipping tape. I tested the wireless charging for two hours and it works. Even through a case. The camera flash and mic is also fragile be careful and the glass around the area is extra thick. Breaking the glass up makes it easier to remove. Know where the speakers and antenna are in the top right. Just be SUPER careful when you know you are in an area with components. And yes you can stab the battery if you are not careful. I am surprised the phone still worked after two hours of abuse trying to get this thing off. Use a heat gun and gloves it will be HOT but it is the quickest way to get the area hot and remove the glass. Use a combination heat and breaking the glass to get the stubborn areas. BEST TIP: DO NOT BREAK THE GLASS! Can someone make a metal or plastic replacement?

Sin comentarios

Hi highly recommend this one has it is said big camera holes so when you taking off the old glass you don’t have to remove the camera rings Also lens protectors will still fit on the camera

Broken while applying

All good perfect for iPhone 12 Recommended

It is simple...but a pain in the ass. Took forever to get old glass off. Prob won't do it again. Just live w it.

As described

gr8