OEM Rear Back Glass Replacement (Pacific Blue) Compatible with iPhone 12 pro max 6.7 inches All Carriers with Pre-Installed Adhesive and Repairing Tool Kits

Had my iPhone “professionally” fixed. Was charged and within 24hours the glass broke again. Was going to be charged again for another replacement. After some research and online videos I decided to replace it myself. Ordered this back glass and it arrived perfectly. Even had the apple logo on it where as the “professional” one did not. The removal of the old glass was tedious but I took my time. Cleaned it up as much as I could before applying the new one. Added rubber bands to help seal it, plus I also sat some of my books on it and left it like that a few hours. I highly recommend wearing eye protection. The glass gets everywhere when removing.

This backglass is excellent if you need to source the part quickly. Normally, I order in bulk directly from China for $1-4 per piece, but I run out, and Amazon is my go-to. It is not a premium piece of glass, so it is best for trade-in or if you are generally really careful with your phone and want to save money. Premium glass is not easy to source. Yes, it has the Logo. I use a 20-watt fiber laser to do this process and it takes 2 hours. I have tried to do this with a hot air gun and it was a miserable arduous process. It took 5 hours with experience in phone repair, never again! You will cut yourself I promise and you may ruin some of these components like the flash module (even an accidental nudge will tear it off), the microphone at the bottom left (cable sticks up behind glass and if cut causes a 3-minute boot cycle), you could poke your battery (lights on fire), could ruin wireless charging and NFC (easy to do without alcohol and plastic cards because it's adhered to the glass), etc. You will need a new magnet, coil cover sticker, a non-corrosive adhesive (T-7000 or T-8000), and clamps to finish but the surface will be so rough and dirty from a blade it won't be flush with the frame, glass won't stick and it will break easily. I am a professional and do this for a living. I fix 150-200 devices a month so if you need this done look up Franchitti's Fix in San Diego. I got wise after 1 try and saved up $3,000 for a laser and materials. I can do the process quickly and efficiently with fewer errors and more consistent quality.

Quality was great, very easy to install and fits perfectly.

I don’t recommend this product at all. The back glass for iPhone 12PM is very thin and extremely sensitive. I just placed it on a clean surface and started the installation carefully, and it cracked immediately with very light pressure. I’m a professional technician and I install this type of back glass every day, but this one broke way too easily. It’s definitely not original quality and not worth the money. I don’t recommend anyone to buy this product.

Great

good quality, easily installed.

Perfect

Using a hair dryer and PATIENCE to remove the origin glass, the attachment to was easy to attach (removing the original glass was the hardest part). I would recommend buying b7000 glue to help attach it, since the adhesive isn’t that strong. I would also recommend placing something (like a book) on top of the attachment upon instillation (I forcefully pushed mine and it broke). Remember it is a thin piece of glass that can break when the pressure isn’t evenly distributed. The color was a little less “sleak” than the original, but it isn’t that noticeable (if they’re looking that close they want you). I do recommend buying this product to save yourself the money, if you’re careful.