40Gbps NVMe SSD Enclosure, M.2 to USB-C Adapter for NVMe M-Key 4TB SSD 2280, Aluminum M2 External SSD Case, Compatible with Thunderbolt 3/4 USB3.2/3.1/3.0/Type -M234-Grey

I tried 4 system to get it connected via C TYPE or USB IT it is not showing anything on MacBook pro , Desktop PC and windows laptop and it is not working very bad experience…

في الاعلان غير الحقيقة كذب كله كذب

هو جيد جدا وسريع جدا إلا أنه يرتفع الحرارة وغالي السعر اشتريته ب 700﷼ وركبت فيه ssd 990 سريع وحملت عليه نظام الماك Sonoma

Se calienta muchisimo, no lo recomiendo, seguramente no funciona bien el chip interno

the case height is greater than most TB/USBC SSD enclosures so there is a large gap between the SSD and the top case. For that reason I guess, they supply an extra metal heatsink that should fit between the thermal pad which they supply also, and the top of the case to transfer the heat to the case. Only it doesn't fit properly on the Samsung 980 SSD. It is too narrow so won’t sit level on the thermal pad. I tried spreading the edges in a vice after which it at least mounted level in contact with the thermal pad. But it didn't look like it was making good contact with the case. So I removed it and added a 1.5mm thermal pad to the one they supply. Luckily I had that. This combination presses snugly to the top case and transfers heat from the SSD to the case. The measured speed (Blackmagic) is fine using an M1 Mac; over 2700mbps on both read and write. But the design of the case is not as good as some other of Orico’s own cases. Those don’t require kludge measures to get the heat to transfer to the aluminum case. Also the case machining is better on those. I would not buy this model again.

Seems good. It gives about 3.2 and 2.4GB/s read and write thunderbolt speeds on a Samsung 990 Pro 1TB SSD. See the US Amazon.com page for compatible and recommended NVMe SSD drives. Not all SSD drives work correctly, apparently. Gets a bit warm for more than 10 minutes of operations, but not too hot.

Works well with devices TB4.USB4