Evolution Power Tools ST2800 Circular Saw Guide Rail/Track Fits Makita, Bosch, Festool, (Clamps and Carry Bag Included), 110 Inches

Excellent product, I am using it as a guide for cutting 24 inch tiles. the clamps work very well and they can be placed underneath the track to secure tiles when using the guide. The track is versatile so you don't need both guides together to cut 24 inch tiles. Clamps attach to both or with just one. The track is durable and easy to use and comes with a carry case(cover).

These are good tracks and they work well My only two issues: 1.the bag is too small to fit the tracks in , If they only had a couple more inches to easily slide in it would be much better . I’ve had to cut the end of the bad for them to fit easily. 2. Edges of the aluminum are very sharp and you need to take a file to knock off all the edges

My dewalt track saw DCS520B fits perfectly on these. I think these are a 1 to 1 copy of the festool track so any saw that works on festool track will work on this one. It doesn’t have the anti tip lip like some tracks do. Which is good because the festool track doesn’t either and it’s why the dewalt saw will run on these. I’m extremely happy with the quality and price.

Easy to set up and use. It allowed for perfect cuts using hand held wet saw for large format porcelain tile. It is intuitive.

So the Clamps work well and tracks fit together nicely. The kit does NOT come with enough connectors to connect these tracks to all 3 that come with the saw but customer service was able to get me squared away with the additional connections. I did try to cut some 3/4" plywood yesterday and ran into an issue whereby the blade was seizing but customer service has been very helpful and one way or another we will get it squared away. Based on the interactions so far I will say it seems like they stand behind their products! Will update if that changes.

I really wanted to like this, but ended up returning. The biggest problem is really the splinter guard that they install. It is way too flexible, and not sticky. So it's constantly moving. As it is supposed to be the edge where the blade goes, you can't have it moving all over the place. Also, I didn't really love the clamps, they seem a bit clunky to operate but I could live with that.

I purchased the Evolution ST2800-G2 110" Circular Saw Guide Rail specifically to use parallel guides with my DeWalt track saw and to improve accuracy at the beginning and end of 8' cuts. For the price, this track offers good value. It fits my corded DeWalt DWS520K track saw with no issues. When the two sections are joined, the total length is 110", which makes ripping full 8' sheets easier and more consistent than using my DeWalt 102" track. There are a few drawbacks. I don’t like the included joining bars. They weren’t tight enough unless rotated 90 degrees, and doing that visibly deformed the extrusion. Because of this, I ordered TSO rail joiners and expect those to work better. The ends of the track were not square. This only matters when joining the two sections. I checked alignment using two different 6' levels and my DeWalt 102" track. When aligned properly, there was about a 1/16" gap at the back of the joint. The splinter guard also didn’t cut as cleanly as expected. This may be related to the blade I’m using, but it’s worth mentioning. Overall, I’d buy this track again. I don’t use a track saw enough to justify the higher cost of a Festool track, and the Makita and Milwaukee tracks won’t fit my saw without modification. For occasional use, this track makes sense. If you rely on a track saw every day, I’d probably pass.

they work grate

Ho una circolare makita e sono perfetti. vanno bene come suporto per il taglio

Comme pour chaque produit évolution, le kit rail de guidage est sans aucun doute possible le meilleur rapport qualité prix du marché. Tout y est de bonne qualité, les serre joints sont certainement de très bonne qualité, ce qui est très rare pour ce type de kit. , le sac pour tout transporter est un peu juste, mais c’est vraiment le seul ( tout petit) défaut que j’ai pu trouver à ce kit. À acheter les yeux fermés

He comprado esta guía para mi sierra de incisión parkside performance PPTSA 20-Li A1 y encaja casi a la perfección. La goma para evitar el astillado con el corte es un poco larga para este modelo de sierra pero lo importante es que libra el aluminio, así que tras el primer uso cortamos el sobrante y sigue funcionando perfectamente. La uso principalmente para corte de tablero y con las gomas antideslizantes sin problema. Con una longitud de 2,8 metros total (dos piezas de 1,4 metros) tienes para cualquier corte prácticamente. Y el sistema de unión de las dos partes de la guía es sólido y sin holguras. Los sargentos no los he usado de momento. Son un buen complemento, pero para usar en obra es demasiado lento, y con las gomas antideslizantes (y bien apoyado) es más que suficiente.

Väskan som medföljer rymmer 4 skenor

One of the best tools I have bought, in a long time! Easy to use once you have your chosen length an put it together. I have since purchased the longer panels which allows me to easily rip a 8x4 sheet. Positives: The track panels appear well made (versus the cost), are pretty straight and packs neatly away in the provided bag. Even with my additionally purchased longer panels. The saw runs well along the track as long as long as you have put it together properly and is a decent tool in its self. It can handle all materials that I have cut using it. A more affordable DIY home use version of the more expensive professional types that are available so in terms of value for money - its right up there in the DIY arena. The clamps are fairly good and do work well. However, see below for the negatives on these. Although I consider the following to be the negatives, they are minor and I still gave it the well deserved 5 stars: The clamps are not all that strong and do bend if you are not careful. Looks like cheaper material has been used to keep costs down and may require a re-weld on the joints at some stage. Not an issue to me as I have a MIG welder. But weak non the less so be wary not to over tighten them. The plastic/ rubber guide strip get chewed up quite quickly if you are not careful. Mine are now all but gone but you just compensate for it when placing the panels on your piece you are cutting. It still works as intended without them. These can be replaced if you are that bothered about it. Putting the tracks together require the Allen Key for the small grub locking screws (4 per strip and 2 strips per panel) and is quite fiddly, but do clamp the pieces together well. I would prefer some sort of quick lock system, but you would pay more for that so am happy with the system it has. All in all, a great HOME USE product. My opinion is; its not a professional piece of kit by any means, but does stand up well against its vastly more expensive Pro-Use competitors.