New Replacement Front Back Faceplate Plates Upper & Lower Panel Battery Housing Shell Case Cover for New 3DS XL 2015 Game Console - Limited Edition Gold

I only needed the back plate. It doesn't fit perfectly, but it does fit well, and included the little screws w/ the snap rings. It's not identical but it looks just about as good as the original and feels like it. Really thankful that it's being sold. And uh, blah blah it's perfectly durable and is a good value.

Everything was cut wrong. From the power button to the screws. The bottom plate just flat out doesn't fit properly. Very cheaply made and cut, it is semi close to being cut right but that doesn't matter when it wont properly go on the system.

looks grate, but the messerments where a bit misscalculated, the holes for the screws wher a tiny bit off

Bottom plate does not fit at all, and holes are very slightly off. Top plate was fine, which is all I really wanted, but now my plates are mismatching because I can’t put the bottom one on. Top plate is also just the tiniest bit off, but I have a clear case on the outside to close off the seams. Not worth the money. Apparently others got good molds that fit the system, but these clearly aren’t tested.

Amazing, looks great

The Front cover was almost perfect, it just doesn't snap in all the way where the cameras are, leaving a very small gap. As for the back plate, wont fit at all. The Power button slot is cut incorrectly and to small, along with the audio jack.

I bought this worried about the quality and if it would fit well but to my surprise when I did the case swap it was simple and fit well. Although I saw maybe 1 imperfection it was definitely worth my time and money as I absolutely love the way it looks.

Firstly, the graphics and paint on the case are done very well and it is very pretty. That is basically the only good thing about this shell. The negatives are that both the top and bottoms sides will require some modification to get it to fit right. You will likely need a small round file to open up the holes for the headphone jack and power button on the bottom and I also needed to shave some material from the locking tabs on the upper half to get it to seat into place better. The material is very brittle so you have to be careful when installing or it will crack particularly near the area by the headphone jack. After trimming the bottom shell it lines up well enough. However the upper portion ends up having the four screws on the screen side being slightly off so you have to force this piece on while screwing the hardware in otherwise the screws will not start. I also put a clear case over this to help hold everything together. I think if I didn't have a case to put on the outside I would not use this. I would change my rating to 5 stars if this was prices around 10$ or under, for what it is I think it is way to expensive.

It's pretty cheaply made and flimsy. I had to modify it by sanding to make it fit properly, and even then, it isn't a great fit. However, with a clear hard case covering it, my new 3ds XL does look really good, and you wouldn't be able to tell it was an unofficial shell unless you examined it.

The plates look great! The finish is beautiful and the artwork is nearly perfect as a replica. Overall they are good, the issues are just with the exact dimensions. They aren't perfect, the bottom plate doesn't quite fit as snug as the oem part. So it can squeak in your hands a bit. Also the holes on the bottom front for the headphone jack and the power button should be round and mine arrived more of an oval shape, which I had to trim to work properly. Other than that they are still really nice looking.

This shell was exactly what I was looking for to replace my tired Monster Hunter shell. However it was so so SO close to being what I wanted. The shell doesn't fit snugly around the side hinges on the top plate and the camera clips on the shell don't clip into the housing to make the shell flush with the house. The bottom shell was JUST snug enough to hold in, although the power switch hole should be filed down a little more to give the power button some room to breathe. I'm so disappointed. I'm going to reach out to the seller to see if there's something that can be done to remedy this. If not, I'll be requesting a refund. For this price, you'd think they'd fit like a glove since it's more expensive than other shells you can find online.

Back faceplate loose despite being screwed down. Not worth the money, I played for it.

It just sucks, did not fit.