

Desertcart purchases this item on your behalf and handles shipping, customs, and support to Denmark.
🖨️ Spray, Print, Perfect: Never lose a print again!
3DLAC is a 400 ml high-temperature resistant spray adhesive designed specifically for FDM 3D printers. Developed by a Spanish lab, it ensures superior adhesion of ABS, PLA, and PETG prints to smooth, heated beds, preventing warping and peeling during printing. Easy to apply and clean, it guarantees flawless first layers and hassle-free print removal.

| ASIN | B01HQ4KXZ4 |
| Brand | 3DLAC |
| Brand Name | 3DLAC |
| Color | Clear |
| Colour | Clear |
| Compatible Material | ABS, PLA, PETG |
| Container Type | Aerosol Can |
| Customer Reviews | 4.7 out of 5 stars 7,424 Reviews |
| Full Cure Time | 6E+1 Minutes |
| Global Trade Identification Number | 08411322235803 |
| Item Form | Spray |
| Item Package Quantity | 1 |
| Item Weight | 0.25 Kilograms |
| Item form | Spray |
| Manufacturer | 3DLAC |
| Material | ABS plastic |
| Material Type | ABS plastic |
| Model | 8411322233113 |
| Number of Packs | 1 |
| Number of Pieces | 1 |
| Other Special Features of the Product | High temperature resistant, reinforced fixative for 3D printing |
| Part Number | VAR3DPRINTLAC |
| Special features | High temperature resistant, reinforced fixative for 3D printing |
| Specific Uses For Product | 3D print |
| Specific uses for product | 3D print |
| UPC | 644221097861 |
| Unit Count | 400 Milliliters |
| Viscosity Level | Low |
| Volume | 400 Milliliters |
| Water Resistance Level | Not Water Resistant |
M**M
العين
المتج 100/100
J**S
Solider Haftheld fürs Druckbett – 3DLAC ganz ohne Rätsel
Ich hab den 3DLAC Sprühkleber (400 ml) über mehrere Druckjobs hinweg im Einsatz gehabt, und wenn es um eines der stillen, aber entscheidenden Helferlein im 3D-Druck geht, dann fällt dieses Produkt ganz klar in die Kategorie „macht, was es soll und zwar zuverlässig“. Was ich sofort mag: Die Handhabung ist einfach und vorhersehbar. Leichtes Aufsprühen, kurz trocknen lassen, und das Filament haftet sehr gut – gerade bei PLA oder PETG spürt man den Unterschied, wenn die erste Schicht sauber und plan am Bett sitzt. Kein lästiges Nachjustieren der Druckbetttemperatur, kein „Ränder heben sich, Mitte bleibt kleben“-Drama mehr. Gerade bei großen oder flachen Drucken ist das ein echter Komfortgewinn. Der Sprühnebel verteilt sich fein, ohne gleich eine nasse Pfütze zu hinterlassen. Das sorgt für gleichmäßige Auflagefläche, ohne dass man hinterher Stunden mit Reinigen oder Abkratzen verbringt. Und falls doch mal zuviel drauf ist: Mit etwas Wasser oder einem feuchten Tuch lässt sich das nach dem Druck recht einfach entfernen. Die 400 ml-Dose reicht erstaunlich lang – ich drucke regelmäßig und habe bei weitem noch nicht die Hälfte verbraucht. Das ist angenehm, weil man sofort merkt: So ein Helfer wird nicht zur Einwegware, sondern bleibt länger im Werkzeugkasten. Fazit: Ein solider Sprühkleber für bessere Haftung auf dem Druckbett, der zuverlässig und ohne großes Gefrickel funktioniert. Besonders bei anspruchsvolleren Drucken oder wenn du öfter mit Materialen arbeitest, die nicht von allein anbetten wollen, kann 3DLAC wirklich den Unterschied machen zwischen „läuft sauber“ und „Stop-Spiel“. Im 3D-Druck zählt die erste Schicht oft mehr als alles andere – und dieser Sprühkleber sorgt, dass sie nicht zur nervigen Hürde wird.
S**E
Good product.
Good product, works well, will purchase again when the time comes.
S**N
Werk super
Werkt zo fijn met mijn 3d printer aanrader!
B**I
Funciona bien
Imprimiendo sobre las placas magnéticas PEI chinas que no pegan bien ni PETG, este es la solución perfecta. No deja marcas y no hay mas fallos de despegar esquinas. No lo he probado aun con otro tipo de materiales, pero para PETG barato que hace mucho warping si que sirve.
M**A
Exceptionally good value and a must-have for smooth plates—and for textured ones too!
3DLAC is an absolute must-have if you operate on a smooth bed, but it is also great on textured plates. I tend to use a textured plate that is getting old and starting to lose its adhesion, but a quick spray brings it right back. You only need an occasional light dusting, so a single can lasts ages. It holds up exceptionally well even when heated to high ABS bed temperatures (typically 90°C to 110°C) with zero adhesion issues. Just be careful not to spray too heavily—applying too much can make the grip almost too strong and cause dark filament colors to leave a slight residue that might transfer onto a subsequent white print. There are a few comments in other reviews about the smell. I found that it does have quite a strong odor when spraying—it is not particularly unpleasant, but you definitely wouldn’t want to breathe it in, so spraying in a well-ventilated area is a good idea. At 400ml, the can is massive and fantastic value for money. Whether you are running glass, smooth surfaces, or pushing high-temp materials on an aging textured plate, keeping a can of this next to your printer is a must!
Trustpilot
2 months ago
1 month ago