Black ABS Car Center Console Dash Table Storage Tray Fit for Toyota Tundra 2014-2021 Instrument Organizer 360° Rotating Phone Holder Cradle Accessories (with Mobile Phone Holder)

Fits perfectly in my 2018 Tundra. Holds my phone just perfect and adds a little extra safe storage on the dash. I love it. UPDATE 02-14-25: I've had this for a year now and do love it. However the ball that holds the phone just snapped off rendering it useless. I had hoped it would last more than 1 year.

Ordered this try for my 2017 Tundra, Crewmax. For those of you that own Tundra's from 2014 to 2021, you pretty much know that tray/divot in your dash is kind of useless. Put a pair of sunglasses there and take a turn, your glasses end up sliding off the dash.. So this looked like a nice accessory to keep things steady and in place. . For one, the two sided tape they include on this tray (Pre stuck on) doesn't adhere to the dash. I degreased the area and followed up with denatured alcohol, 4 times, to prep it. It's almost like the dash polymer is the same material as the 2 sided tape strip you pull off to expose the adhesive. It simply doesn't stick. I then removed it off the tray (It comes off very easily) degreased the back of the tray, and tried the max strength 3M, 2 sided tape (Dark Gray with red backing). Again, this doesn't work as well. So there are two things that will work, as I ran into a similar situation with some accessory stainless steel plates I bought for my Tundra (Center console cover and arm rest cover, you can get them on amazon). . FIRST! Degrease and prep the area of the dash (If you've put any dash treatments (armor all, klasse, whatever) on the dash you want it thoroughly degreased and cleaned. Use a purple degreaser, like Zep, 409 or something similar, then follow it up with alcohol. Wipe it down with Alcohol 3 or 4 times, let it dry. . Alternatives: 1. You can use a silicon adhesive. Buy the black silicone adhesive (similar to "Caulking" but in a small squeeze tube). Just put three (3) dabs on the back of the tray, about half the size of a Hershey's kiss, (two in the back, one in front, be sure to not put it where your 3 alignment slits are in the dash, where the Silicone can get in there if you want to remove it later). Put the tray in place. Put two water bottles in the tray and leave it there overnight. Make sure it's not moving, so maybe use some blue tape on all the sides to secure it in place. The constant weight of the water bottles will be enough to keep it down and get the right adhesion at the right level. You can still remove the tray in the future, with a little work, and you should be able to remove what's left of any silicon adhesive. . 2. The other method, which I used, was to use the max strength Hook and Loop fastening tape (You know the brand, starts with a "V").. You can get it in 2" x 3" squares. I cut them in half so I had 3 equal pieces. Put three pieces on the back of the tray (2 in the back, 1 in the front) With both male and female pieces stuck together, with the ROUGH scratchy side of the Hook and Loop tape sticking to the tray). Then set it in place. For whatever reason, the adhesive on the Hook and Loop fastener does stick. . Also, in the ad it might be a bit confusing, but the tray doesn't come with a rubber matt or anything like that. It's just the plastic tray itself and the optional removable Phone attachment. I'm not going to use the Phone Attachment as I have a phone attachment I use. But, the factory pad/tray you have with your Tundra (the rubber one), does fit inside. Even though the factory tray has the 3 alignment tabs on the back, to make sure it stays in place on your dash, it sits in there okay for what it is. You can trim the tabs, but if you ever decide to remove the tray and go back to stock that pad won't stay put. . ROOM for IMPROVEMENT: 1. I'm not sure why accessory manufacturers never use this, but those 3 alignment slits, on the dash, for the dash pad that comes stock, would be perfect alignment slits to use for accessories such as this. Meaning if they put "fins" on the back of the accessory it would ensure you have a perfect alignment every time. Just a suggestion. . 2. This accessory tray has that little cutout in it for the phone accessory attachment. If you don't want to use it, that hole is exposed. The maker of this should include a cap you can put in there to cover up the hole. Just a suggestion. Other than that, it does the job and kinda breaks up the dash a bit. Looks good and at least I know stuff will stay put now.

It works well enough but nothing special

I don't know about all the sticky working or not. I don't know about how long the holder lasts. I do know this, the holder will NOT fit in the hole. It will fit on the bottom. As a matter of fact, in the bottom of the unit, the hole has slots to accommodate the clips on the holder, and it fits perfect. If I wasn't a skilled contractor who has put together many finish items, I would say the hole was manufactured upside down. Notice in all the product pictures, there is not one where you can see the holder fitting into the hole? Very, very, disappointing.

perfect fit in the molded dash pan area. I was not really expecting such a good fit and was pleasantly supprised and the only thing i would be careful with is make sure your exactly where you want it placed as the 3m tape is not easy to remove.

had produst less than two years and the cell phone holder broke. its plastic clips not very strong. i dont see any way of just buying this part and unless comany sells this item seperately its of no use.

I have a Tundra. I used this as an option for that annoying space that no one can every seem to find a use for. It fits nicely and is very secure. Eventually I took it down because I still don't put anything up there. The plastic is very solid and durable. The only negative is that the plastic can be a bit slick, so it may be good to put something in there to keep things from sliding.

I love the phone holder! And the deep tray to prevent anything from sliding around while driving! Adhesive and placement is a little iffy but is holding up well so far!