TP-Link ER605 | Multi-WAN Wired VPN Router | Up to 4 Gigabit WAN Ports | SPI Firewall SMB Router | Omada SDN Integrated | Load Balance | Lightning Protection | Limited Lifetime Protection, Ethernet

Good product

Worked fine

منتج رائع وقوي

Keeps Hanging every 2 to 3 days, must be rebooted manually avoid

It does the job pretty well.

I was expecting a 4 wan capability i received a 3 wan capabilities

It is not working as advertised. VPN Not working, you cant enter dns instead of ip address as mentioned in the manual. its misguiding

good. with multiple wan

This product is marketed to small business needs, I am using it for a home router, and it works well for that but requires some technical aptitude. Our old WiFi 5 (802.11ac) system was dying. Big house, need at least two access points. Our access point died (would lose connectivity once a week, then once a day) and our combo router/access point was starting to have issues, so it was time to replace it. I went with TP-Link Omada specifically because I wanted affordable ceiling-mount access points that uplink (backhaul) over Ethernet and can be individually replaced/upgraded as needed, separate from the router. I wanted Omada because of the ease of administration of everything through a single interface. The ER605v2 is the least expensive TPLink Omada based router I could find and I like the fact that it offers the ability to connect to two separate WAN uplinks for redundancy. It does have a stand-alone configuration interface but I'm using an Omada hardware controller to configure it. It's boot time is longer than I would like but since the initial setup I have not had to reboot it. I do recommend a UPS so that it doesn't need to be booted after a power failure. The Omada controller interface can be somewhat confusing to understand but once you have it doing what you want it to do, it just works. I get the full gigabit download/upload my ISP offers. For a router without built-in WiFi, this is an excellent option *especially* if you plan to use Access Points controlled by an Omada controller. I was able to do some basic VLAN configuration (e.g. separating IoT devices from main LAN) with it despite not having any L3 switches on my network, but for some VLAN capabilities apparently you need one model up (ER7206). It works well. I have not (yet) tried the VPN features.

Très bon routeur pour le prix. Le TP-Link ER605 est facile à configurer et l’interface est claire. Je l’ai acheté principalement pour le failover WAN, et cette fonctionnalité fonctionne très bien. Avec un léger ajustement via le policy routing, on peut obtenir exactement le comportement souhaité. Stable, fiable et efficace — excellent choix.

Great product

I bought this unit because I only have vdsl. I bought a second line to gain more bandwidth. I I run alot of services in my homelab. Even when I'm downloading or uploadeding large files it only sits at 60 percent. Great for people who need a backup line or load balance between 4 connections. I it has good fetures like port forwarding and all standerd networking. I works with cloudflare tunnels

This was supplied with a US Power Adaptor, I had a suitable one from my drawer of stuff but if you don't it would be useless! Easy to set up if you are familiar with what it does. I set it up with two broadband sources feeding into a network switch and let it look after the DNS. I set all my NICs to IPv4 for convenience.