Muzata 5Pack 3.3FT Silver LED Strip Channel with Milky Diffuser U1SW WW

They look good. I installed mine in the ceiling next to the trim and used govee led strip light pros. I didn't use the mounting clips because I didn't like that you could see the silver from them. I ended up using 3M double sided sticky tape to hold them up. They worked perfectly for my application, theyre easy to install and cut if you need to. I'd recommend them.

These LED aluminum channels are a game-changer! They make my LED strip lights look incredibly professional and clean. The diffuser does a great job of softening the light and eliminating those annoying hotspots. Plus, I love that they help with heat dissipation, which should make my LEDs last longer. Easy to install and totally worth it for a polished, high-end look. The plastic diffuser can be a bit tricky to click into place.

The package includes clips and screws to hold the aluminum channel pieces in place. The Most Fun part of installing is laying on my back and drilling pilot holes in the bottom of the upper cabinets. The little clips work perfectly to hold the channel sections in place. The kit comes with covers and end pieces for the channels, including holes for wire access. My original LED installation suffered from some overheating at mid-strip junctions, eventually causing breaks and dark sections in the under-cabinet LED strips. I've been progressively upgrading the various rooms with aluminum channel for the strips, so the aluminum might do a better job carrying and dissipating local strip heat. This kit was for the third room install, with the heat-dissipating function already proven. This channel kit has a significant advantage over the deeper channel kits I used for the first two-- the available light distribution is much less limited by the channel walls. I'm only part way through this part of the installation at this point. If there are changes I'll update the review. So far though, I/m happy with the product and the results.

Seems to do the job. One comment that I have is that the little screws and mounting clips i found to be pretty worthless. When trying to mount the LED strips I found that I pushed and pulled on the diffuser it would easily pop out of the clips or bend the clips so it was super loose. Hot glue was much more effective at keeping the diffuser in place.

Very well made. Easy to work with. I used the metal clips to screw the aluminum channels on to the installation surface. I see a nice little air gap between the back of the aluminum channel and the mounting surface which is great for air circulation and extra heat dissipation from the LED strips. The channel covers are soft and care is required when cutting with scissors so as to not deform them. Installation was super easy!

Appears to be decent quality aluminum channel and diffuser however the reason for 3 star is back to lack of chinese QC as usual. First time trying this brand for an undercounter kitchen lighting install; plan on further update after completed and tested. Channels are 1M in length and hardware kit is also included for mounting of the channels. In a past life I have installed and managed teams for professional telecom installations and secure sites around the country - have just a bit of knowledge for installations requiring 99.999% up time. The company would send installation packs to save time and costs and one thing you did not want to be short on were the nuts and bolts that literally were needed to install correctly and professionally. For these 1M strips I would want to place NO FEWER than 3 clips per strip (preferably 4) however this pack has 25 clips, 20 screws, 10 endcaps, 10 endcaps with holes. For 10 channels and 10 diffusers - at least the end caps match assuming none of the channels are cut to length for the application. The 25 mounting clips with only 20 screws is a bit confounding and if the clips were a standard type part available locally it would just be a frustrating trip to a store with lost time but not the case here. Will likely end up just drilling straight into the channel for mounting after going to the store to acquire more screws for the manufacturers lack of QC. UPDATE: As expected, not enough mounting clips. The diffuser works well but had to make a trip to the hardware store to pick up a pack of 100 screws. The clips make a small gap that helps with heat dissipation but ended up placing 2 clips and added screws at ends by drilling through the metal track making a solid connection but eliminates gap. For comparison see photo. Photo is a competitor brand but not an apples to apples comparison - the other brand is twice the track but pay attention to the hardware, you can see that this track (left pic) does not contain even half of the hardware of the competitor brand (right pic).

These LED light tracks look great and give LED strips a much more clean, professional appearance. Instead of using the included mounting clips (which require screws), I used double-sided tape to attach the tracks to the wall, and it worked perfectly. I preferred this method because I didn’t want to put holes in the wall, and the tape made installation much faster and easier. It took two 10 pack 3.3ft track kits to fully go around the top of a bedroom (approx. 52ft.) with 14ft left over for my living room (see picture). If you’re planning to decorate with LED strip lights, I highly recommend using tracks like these. They make the lighting look far more polished compared to sticking LED strips directly onto a wall.

Does a pretty good job at diffusing the light (light strip has approx. 18 LEDs/ft). If the channel was all the way against the wall you can see all the imperfections in the wall finish so I moved it 3" out from the wall. Pretty easy to install...Taped channels together and cut covers so that cover seams were staggard with channel seams. Had to take covers off and put back on a few times and it was not difficult.

These LED channels are pretty good. They make my strip lights look much cleaner and help diffuse the light evenly. Easy enough to cut and install. Recommend for a more finished look. Note that there are some hot spots, however.

MUY BUENOS PARA PONER TIRAS DE LED

Fast shipping, the parcel was received in just a few days. Good packing, the LED channels were tightly wrapped and fit into a long box. Good quality, the aluminum channel is sturdy, solid and straight, no bending, and the end cap fits well to the channel. Easy to install by pressing the channel onto the mounting clips.

I would not recommend buying this product, fitting the plastic diffuser cover is a nightmare.

This LED housing does absolutely nothing to be honest. It was difficult to install the metal tracks on and the diffuser covers that slide on feel like flimsy pieces of plastic that can snap at any given moment. Does not diffuse the lights as advertised you can basically see each individual bulb on the track. Especially for the steep price point it should at least do SOMETHING amirite. As someone else's review stated it definitely does give "cheap strip club dance floor" vibes in my room. Returned the item and bought two $7 pieces of corner moulding from home depot to reflect the LED strips onto the wall instead and had a wayyyy better result.