Projection Alarm Clock, Atomic Clock Weather Station for Bedroom | Adjustable Projection Brightness, Indoor Outdoor TEM&HUM Monitor, Backlight, Weather Forecast, HI/LO Records

This clock is NOT atomic as described. It is radio controlled so therefore does not set automatically. Very disappointing for the price. Have yet to decide whether to return it. Works well so far, manually. Update: I must eat my words! True it is not true atomic, however radio-controlled clocks DO update automatically and this clock functions as it should. I bought a second clock like this at a later date, did not check it out as I was content with the first one, and put it away for use later. When I did use it, (outside the return window period) I found the projection numerals quite blurry. I contacted the manufacturer, was assured that the product was under a one-year warranty and after several prompt, courteous email responses, a few photos sent, diagnostics by their tech team, I was issued a new clock which seems to be working well. My apologies for the first review.

I've always been interested in a projection alarm clock, since my clock is on the headboard behind my head, and my eyes don't adjust well at night. Also, I work outside and wanted to know the temperature as soon as I wake up so I know how to dress for the day. This baby has it all! Pros: •love the projection! I don't have to turn my head around to see where the clock is. It ends up bigger than the clock also, so easier to read at night. Also, you can angle it however you need to, and even flip the projection over for those of you who install it somewhere other than the headboard. •As mentioned, I also love seeing the current temperature in that projection. It changes every 5 seconds from inside to outside temperature. •I haven't used the alarm function, but read that you can turn the alarm off with any button on the clock. Plus the snooze button is adjustable so you can make it snooze as long as you like, or make it another "turn off the alarm" button. •The temperature remote for outside synced immediately upon turning it on, so no troubles there. •Also the screen of the alarm clock can be set to be full brightness or three other dimmer settings, in case it's too bright for you at night. Cons: •not much to complain about here. My only trouble is that the clock does the whole atomic clock thing where it sets itself using radio waves. Unfortunately where I have it in my basement it can't get those radio waves, so it won't set itself. Not a fault of the clock, more a problem of where I installed it. But it isn't a big issue for me, since you can set the clock manually also. Overall, love this clock and since my kids are now begging for one, Christmas will be easy this year!

We bought this as a projector clock for our bedroom. It projects the time and both inside and outside temperatures, which is really useful. The display on the clock itself has multiple brightness levels. We had to set it to minimum, as higher levels lit up the bedroom like a flashlight. At low level the screen is still visible by day, but only just. The clock displays inside and outside humidity on the screen, which is very useful. I would have given this 5 stars, but I dropped one as the outside sensor is not waterproof. It stopped working after a rainy night, although it did start again after I dried it out. I have had to relocate it to a very sheltered spot outside, where it now works well. The clock updates itself from the atomic clock in Boulder CO every now and again. You can tell when it does this as the projector switches off for a few minutes. Overall we are very pleased with this device.

I love the overhead display. I dont have to crane my head to see the time or temperature. It is very accurate and the unit display as a desk top clock is adjustable High, medium, low and off. You dont have to have the display on if you just want to use the overhead view or wall or any where. Set up is easy brightness is adjustable, great value

Good points first, this is a nice clock with projector, day / date, indoor outdoor thermometer all in one package. It is external powered so projector can be on all time and is very bright. The clock projects time as well as indoor and outdoor temperature alternately. It has atomic clock receiver as features claimed, this is highly desirable feature as the clock keeps accurate by synchronizing to atomic clock station, but unfortunately does not work well. At any moment it could corrupt the date/time and show wrong date/time. Because of this, alarm can’t be used reliably. Atomic receiver can be disabled but product specifications does not mention accuracy of clock without atomic synchronization. I would also give big thumbs up for the merchant, very responsive, understand technical aspect and quick to take responsibility for deficiencies of product.

This arrived fast and was pretty easy to set up. The ceiling display is awesome and you can tweak it a bit and flip it if necessary. The display is bright and easy to see on it's highest setting but you can dim it down. The forecasting is lackluster but adds some personality to the display. We like that it displays the temp on the ceiling as well. Worth buying

I have had probably 12 of these type of clocks, atomic setting function, remote temperature and humidity sensing, projection. Several different brands etc. and almost without fail, they have gone dim, both the clock face and the projector over time. Also at about the same time, the remote sensors have failed. Well, I'm impressed with this one especially for the price. The display is very bright, the projection is very bright (I had to turn it down as it was too bright at night) and the sensor setup was a breeze and works perfectly. I don't know what to say. The quality from the likes of Scientific Atlanta, etc. has gone down hill. Count me impressed. I had to lower my rating as there is a pretty big problem. If you keep the clock in a place where the Atomic Clock signal is weak, then not only will it not update the date and time (as to be expected), but it will update the clock, month, day and year with totally incorrect information, not even close. As this update typically happens in the middle of the night, if you were using this as an alarm, you would be in real trouble. I know you can update manually, but that defeats the purpose. Too bad!

For years the time displayed by my previous bedroom alarm clock slowly drifted fast. I've been looking awhile for a projection alarm clock that would periodically and automatically sync the time with an accurate source to address this problem. Newentor's Atomic Projection Alarm Clock fixed this issue and more. The clock's front and projection displays are definitely bright enough and has several brightness levels that can be independently adjusted. The clock displays the time and both the indoor and outdoor temperatures on its front screen and wall/ceiling projection. This device supports a greater distance between the clock and the outdoor sensor than previous devices I had before. My first suggestion to the manufacture is to improve the clarity of the instructions. While somewhat covered in the instructions, please be aware that the clock will turn off both displays shortly after the unit powers on while it is searching and syncing the time with the WWVB service (it does this because powering the displays interfere with the time sync process). Both displays will reappear once the sync project has completed or failed. I inadvertently proved that for the time sync to be successful, you must keep computers and apparently TVs away from the unit during the sync process. The unit will resync the time in the middle of the night (1:00 to 3:00AM) nightly (with both displays going dark for a few minutes). My one other suggestion to the manufacture is to consider adding a FM radio to the unit (if the radio doesn't interfere with the time sync process). Currently the audio alarm beeps at an acceptable volume. For me, this is the best projection alarm clock I have ever had.

So far, it works great! There are a lot of features, buttons, procedures etc. so the instructions are needed. The supplied manual is reasonably good, but there are few areas that are difficult to understand. Not a deal breaker by any means however. I bought it especially for the atomic clock, and as a replacement for my existing projection clock. The projection feature works good, --it projects both clock and indoor and outdoor temperatures which is nice. One disappointment is that the daylight saving feature has to be manually switched on and off when DST starts and ends. It's not a big deal, but a bit annoying as other units switch automatically. The atomic clock feature works very well on this unit, but requires that the projection feature shut itself off for 3 or so minutes while the clock is synchronizing at night. It's not a big deal, but it did catch me by surprise the first time I noticed it blank out.

Works great and has more features than we really need. Every night it randomly turns off for a minute or two. Besides that odd issue, it’s great.

This Newentor projection clock is a great item and more than I had expected. It is bright and precise with regard to keeping time and weather information. I had a warranty issue that was personally taken in hand and resolved in just a week. I highly recommend this weather clock. My experience was just wonderful. My customer service agent Janna, was so efficient and her communication skills were superb. I couldn’t be happier. John D

time on ceiling isn't very bright and the time didn't change automatically for daylight savings. This was my original problem but the company contacted me and this problem was solved. Now I have another problem. The clock will not keep time. I looked at it this morning and it was 1:30 and thought I had no sleep so checked my watch and it was actually 4 :30. This exact same thing happened twice this week. Then the clock decided to shut off by itself. It was plugged in and no one was near it and when I looked over the whole area was black. About 2 hours later the clock came back on all by itself but with the wrong time. I want to return this clock because there is no way that I can trust it to keep the right time or stay on. Very disappointed but definetly not worth paying for this clock.

It's not that big so you don't need a lot of space to put it in yet it does have a good size screen that you can see from a decent distance. The screen has a high resolution and a lot of color to it. It was relatively easy to set up, the instruction manual was easy to follow. I especially liked that the projection image changes between indoor/outdoor temperatures every couple of seconds. The definition quality of the projection on my ceiling is excellent. Well made, quality product.