Grip Glue Adhesive Compound Bottle 1 OZ

Excellent product for re-securing rubber grips to a metal surface like a walker or bicycle. I squeezed 8-10 drops on the metal and slid the grips back on. IMPORTANT: In 3 seconds the bond was 100% immovable. Make sure you know exactly how you want things positioned. Highly recommend this product for the purpose I’ve described.

This glue works extremely well and starts to set almost immediately. Make sure to mock up and test fit before applying the glue! Will definitely purchase again. Used on 2002 hayabusa

excellent works very well

What else can be said?

Seriously, it sets up almost too fast, too fast for me to work the grip on, that's for sure. Good glue, just make sure you can get the grip on quick.

glue works well

Worked as it should, I put a very large amount of this product on my handlebars and throttle tube and a very large amount on the inside of the grip it's self for each side and slid them in with no problems with the product, it did dry very fast so move fast, but the little extra on the bars and grip helped slide on smoother but u can feel infact when it's starting to dry, so move quickly and wear gloves, very good product so far, now if I need to replace my grips I'd rather replace the bars then selves

One grip installed flawlessly. Easy and glue held really tight. The other grip failed. Minutes after installation two small holes began to form in the grip. These holes first were pinprick in size but grew larger rather quickly. Was it the glue that weakened the grip compound or was the grip faulty to start with. I think a little bit of both. Have ordered a second set of grips(Scott). If replacement grip fails I think I will lean towards the glue as the culprit. Will update. UPDATE: No failure problems with the new grip. However, this super glue type grip glue does present some issues. Although I taped the over the small hole at the end of the throttle tube, some glue found its way into the throttle tube anyway. Not really sure how that happened. So I had to remove the throttle tube and then spent a good hour with a rag and goo gone to remove the glue from inside the throttle tube before it would spin freely on the bar. Royal pain. I also fear that when these new grips wear out I will have to replace the throttle tube as well, as this glue, being the super glue type, is going the present a new challenge when removing the old worn grips. I am sure the old grips will not peel off like traditional grip glue allows you to do. I think the traditional type grip glue and safety wire is the better way to go.

Dries fast works well creates a good bond

Amazing stuff. Works exactly how and when it says it will.

Pricey. But it works great. Put my grips on with it. But also used it on some of the wife's things that broke. Holds anything together.

Works great just be ready to put your grips on because it dries almost instantly

Works perfect