Prepac Twin Bookcase Headboard, Espresso

I read a lot of reviews so I was a little reluctant on the purchase of this king sized white headboard. However, I am 100% satisfied with the product so I thought I would share my experience. Shipping was faster than anticipated and thankfully no damage done in the process. All parts included and as described, as noted in other reviews no stickers explaining what was what but that was completely ok by me as it was very easy for me to figure out. This was much easier to put together than I thought it would be. It was also build a lot more sturdy and intuitively than others described. I do not think it will fall apart in the future and it could be disassembled if totally necessary. I do not own the matching bed frame that must be purchased separately. I have a homemade 3 drawer shelving unit with a piece of plywood holding up my king sized mattress. It's the purple mattress (don't recommend it but stuck with it) no box spring, sits a bit lower than most beds. This headboard was the perfect height for my situation, I could see others saying its a bit short but my biggest fear, the front board behind the pillow line was safe, it is long enough to keep pillows from falling through the back. That would have ticked me off and I would have had to add some white board below to remedy the prob. The shelfs are slightly weird for the size items I want to store but I am satisfied with them regardless as I have wanted shelfs behind the bed for YEARS now. I even drilled to holes into the bottom of the shelf, one on left and one on right side just big enough for an extension cord, now hubby and I both have power strips for chargers and such. Kudos to the guy who installed an actually power outlet/ box into the unit. I aspire to be that savvy someday. Wood is thick and though its laminate it has a nice finish. Top piece of molding makes it look sharp and not cheap. I do have base boards but mine didn't really get in the way of the headboard against the wall. I liked someones suggestion of using some felt pads to balance out the issue if it was to arise. It took me and my hubs a whopping 45 minutes to put this together! Not bad when I had read others spent up to three hours... not sure how that would even be possible but very happy it was a simple and enjoyable project for us. Directions are lacking in detail but if you have done similar projects I say follow your instincts and be sure to examine what pieces go where prior to assembling. Remember you are building it rough edge up. And that the top of the long piece for the head board as well as the two side pieces will be covered once you add molding at the final steps. I read the entire directions prior to starting and that made the project more clear. Good luck!

I love this headboard! It was sooooo easy to assemble; it was put together by my granddaughter's boyfriend in under an hour! The price was very reasonable, as well. I love that it is free-standing and I don't need to worry that it's going to tip over. I do wish it was just a few inches taller but that's my own fault; I placed bed risers under my bed to raise the height so I could use the space underneath the bed for storage. I may use some of the risers under the headboard, as well. That would take care of the problem! What a brilliant idea; I just thought of it while I was typing this review! It's a really nice piece and practical for putting my book on when closing it to go to sleep, and keeping cherished little items on it, as well.

Overall I'm quite happy with this purchase. There are definitely things I would look at differently if I were doing it again but nothing that makes me wish I had bought something else (plus finding the perfect headboard is basically impossible). What I like: * Easy to assemble * Sturdy and appears durable * Plenty of storage * Looks good What I don't love: * Should have looked for something with built-in USB ports. Not a deal breaker but I have cables running all over the place still. * Not quite tall enough for my bed. I added a 4x4 block of wood under each leg and that got it exactly where I needed it but it is annoying to have to do that. * There is a gap between the mattress and the headboard. Because the bedframe does not easily attach to the headboard (there are no obvious places to connect it - I could drill holes in the headboard but would rather not) the mattress tends to slip away from the headboard leaving a space where pillows (and other stuff) can fall. Resolved this with a foam insert that fills the space.

I really like this headboard as it suits my needs. I will start off with some things that might be deal-breakers then move on to the good. First, the parts are labeled on the directions but they are not labeled on the parts, you have to match up the pictures with the parts, not hard but requires additional thought! Second, if you want to connect this to your current bed, you will have to drill the holes yourself, not too bad with some bolts but again requires additional work. Finally, if you want holes for cables you have to drill those yourself. On to the good parts. This appears to be quite sturdy, despite being made of particle board. My wife and I were able to lift it into place. The look of the headboard is great. The particle board smell goes away quickly. I would buy this again should the need arise.

This thing is solid! It took my dad and me about 2 hours to put together (he's in his 60s and I'm disabled, so YMMV), but it was pretty straightforward. The white finish is a little thin and fragile near the drilled holes, so be careful putting in the hardware - on mine, the screws hide the small chips/flakes, so no big deal. Make sure you study the pictures well and have the finished sides facing the right direction, or you'll end up like us, installing a piece upside down and drilling into the wrong side - oops! You will need two sizes of Phillips' head screwdrivers for the bulk of the hardware, a hammer, and an electric screwdriver to install the brackets. Overall, a nice piece. Heavy (about 70 pounds?), and feels sturdy, but we haven't moved it into place yet, so I can't speak to how it holds up to movement. Definitely recommend on look and feel alone, though! ETA: Moved it into my room, and it held up great. Just make sure you lift from the bottom part of the shelves and not from the top alone or it could come apart. A little wobbly when I put my pillow against it to sit up in bed, but my mattress and frame are tall enough that there's no risk of it falling over. I would definitely attach it to the wall with those anti-topple brackets if you're using this for kids. Very satisfied, fits all my various bedside bits and bobs with plenty of room to spare! ETA 2: It's been 2 months and this thing is still solid. Still wobbles when I put my reading pillow against it to relax and read in bed, but that's only because my room has thick baseboard that prevents it from sitting flush against the wall. I haven't noticed any cracking, scratches, or dents, and it's easy to wipe down if needed.

I have been looking for a headboard for a while and had even thought of building one. The price of lumber I would need far exceeded the cost of this item. Thus to say.. I love this headboard! The color matches my new flooring perfectly! Putting it together took me 1 1/2 hours. I put it together by myself which wasn't a hard task. It would have be MUCH easier had the parts been labeled. It took a little more time to look at the diagrams and make sure I was using the correct piece and attaching it to the correct piece. There are no marks for attaching a bed frame so you will have to mark & drill the headboard. I haven't done that yet. It was a little hard to put the backing piece on, I needed a couple more hands and it would've been a snap. I got it in place and used painter's tape to hold it & then I was able to hammer the nails. I'm so happy with this headboard! The only negative is the parts are not labeled. Had there been labeling assembly would've been 5 stars. If you are looking for an inexpensive, easy to assemble & attractive piece, this is the one.

This headboard looks really good. It is sturdy and came without cracks or any form of breaking. Hardware was also included. Took an hour to get it together, that is including having to identify which pieces were which since none of them were labled. Cons- the manufacturer should REALLY check their products more carefully! The front trim holes were placed on the BACK of the board (insert face palm). First I assumed it was me, however after taking the bottom half and sides apart, it was in fact NOT me. Theres only one way to assemble the side boards that the trim attaches to, so I took it apart for absolutely nothing. To avoid a long wait to receive boards with the trim holes properly placed, and/or having to disassemble and load up this 70lb headboard in box, I had to go out and purchase E600 glue to glue the trim on. After spending $200 on this particle board headboard, theres no reason I should of had to of gone out of my way to buy something else to assemble this piece. I would also consider placing a sticker on each peice to cut down on assembly time. Overall I do recommend this piece. If they do you the same way they did me, E600 will definitely solve your trim problem lol

I purchased this after carefully researching Amazon Reviews and Q&A and measuring my bed and spaces and by taking that step. I can say this is a good value for your money, if you exert some patience and discipline before you let your trigger finger go on the one click sale. Given the free shipping, convenience, and price, it is a good deal IF you are careful. The very first thing I noticed when it arrived is that it is VERY HEAVY. Before the UPS driver left, I examine the packaging for immediate signs of damage. This is not solid wood. It is pressed particle board, so if there is even a little bit of damage to the box, you can bet before you even open it there may be problems inside the box. Examine it before opening, because a return will be far easier if you report it as damaged packaging and ask for a UPS pick-up and replacement, unless you have two strong backs, a pick-up truck, and a nearby UPS drop off. Next, take a moment to save yourself some frustration. I learned from the reviews and Q&A that the most frustrating part of the instructions is that the individual pieces and hardware are not labeled, even though the instructions describe parts as H1 or T2 etc. So, I took a breath and made sure where I wanted to build this and how hard would it be squeeze it in behind the bed. To clarify, I have a new Sleep Number Flex King bed. Since I spent over $6,000 on the bed, I wasn't going to drop another $2K for a fabric plain backboard that did not even provide you with a shelf or cubby, just to have an "official" Sleep Number Headboard. I did all the measuring and figured out it was best to do this: 1) Label the individual pieces with Post-It notes as you open the box and sort. 2) If like me, you don't have much room in your bedroom for assembly (you need room for shoulders and elbows as you will be screwing and nailing things in at odd angles, consider a two or three stage construction, before the thing becomes to heavy and cumbersome to navigate hallways, corners, and door etc. Having a spacious work area will get rid of much of your frustration before it even arises. For instance, in my case, I did the larger frame in my living room, then carried that into the bedroom and laid it on the bed to do the top shelf, back panel, and molding, so that I could then just slide it behind the bed. 3) It is particle board. Do not assemble in your house on a wet or humid day with all the windows open. This sounds like being overcautious, but exposed particle board it VERY susceptible air moisture which may lead to the crumbling and warping, even during the brief time you are putting it together. With that said, also remember to tighten by rotation and check and double check that you have seated the pieces correctly before fully nailing or screwing them together--especially if you decide to use carpenter's glue at joints, because while pressed wood is a great price, and looks fine when put together, IT IS NOT FORGIVING. Particle board will crumble if you constantly set and reset fixtures. Go slow, and be certain, and you will be fine. Rush it, fail to make sure you have everything lined up before you power drive it together, and I can can guarantee any pressed wood project will make a southern baptist curse like an angry sailor. 4) You will need help. Choose the help wisely. One person should be in charge, the other is the holder and spotter. By spotter, I mean you add the third check to make sure you have the right piece in the right place and facing the correct direction. In other words if you and your wife don't work well as a team know that gong in. See I know my place, she is the engineer I am an retired English teacher. I hold and spot and have no problem with that. So if you are thinking of purchasing this to save a few hundred bucks (and you can) you might lose all that saved money to marriage counseling if you do not know your place and position in the team. 5) Go slow. This isn't a race. Don't pay attention to other reviewers time estimates. If getting it done right the first time matters, who cares if it takes you an hour longer than others. We just finished assembling ours ten minutes ago, so I am writing this fresh of the experience to hopefully save other people any problems by posting this as fresh as possible. Not that it matters, but it took us just under 150 minutes (we have 5 master's degrees between us) but after we both read the reviews and Q&A we were very deliberate in the process. I am proud to say, we had to only retract one screw during the entire process. I could feel the particle board giving way to a crumble just on that one piece, so I can only imagine what folks trying to break some speed goal might go through if they have to constantly reverse and reset screws or dowels. Once assembled and in place, it is wonderful. Please note, if you have things with cords you plan on putting anywhere other than on the top shelf you do not have and pre-drilled wire holes. I do not suggest you put any into the rear veneer either. It is fine as a cosmetic backing, but I don't see the thin material standing up to friction of cords etc. That was fine for us. We put the wired things on the top shelf, and used all the cubby holes for books, remotes, etc. So, great price, and product, if you can avoid the user error problems in advance!

I was worried it would be damaged in shipping but the box was beat up but the item was fine, it's protected by foam, the headboard is quite strait forward to assemble, jut read the instructions, the only advice I can give is when you insert those plastic dowels make sure you got it right the first time because you going to damage the finish if you try to remove them it took me about 1 hour to assemble.

The Prepac Queen Bookcase Headboard has been a great addition to my bedroom. It’s very sturdy and durable, with a solid build that feels like it will last for years. Assembly was straightforward, thanks to the clear instructions, and I was able to set it up without any trouble. The size fits my queen bed perfectly, and the shelves provide plenty of space for books, decor, or nighttime essentials. Overall, it’s a practical, well-made, and stylish headboard that I highly recommend.

Exactly what I needed .

Great product..Be much better if parts were labeled...But overall not bad to put together.just take your time & double check before putting together.One panel was damaged in transit....But was usable .

Awesome product - was easy enough to assemble... Delivered to the door...