Hikig 2 Set Desk Mount for Flight Sim Game Joystick, Throttle and HOTAS Systems - Compatible With Logitech X56, X52, X52 Pro, Thrustmaster T-Flight HOTAS, T.16000M, TCA

The mounts themselves are of great quality, heavy, and there is virtually no wobble when they are mounted to my desk. Assembly was super easy and’s took only a few minutes. They come with pre-installed HOTAS mounting plates and a more universal set of mounting plates if those ones don’t work for your setup. I don’t have experience with some of the pricier brands of desk mounts, but for this price and quality i don’t think I’ll need to.

The instructions are just okay. Learning how to properly assemble it will take some trial and error. They could have given some suggestions along the way, like mounting your controllers first, or which bolts to tighten first and which to leave for last. Assembling the first one took about 45 minutes. The second took about 25 because I learned from the mistakes I made on the first. Once done, this is a very solid product. Great stability. Puts my Thrustmaster T-Flight HOTAS right where it needs to be. The mountain recommendation for the Thrustmaster T-Flight HOTAS is incorrect if you're going to mount them separately as I have. Use the cross bars and there are two threaded receptors on the bottom of each controller. It is enough to solidly mount them. BEWARE: There are SHARP metal edges on these parts. I sliced my knee open pretty good to the point of bleeding profusely for about 5 minutes. No excuse for not rounding these off a little at the factory. Taking off one point of material quality because of this. I'm taking one point off the overall rating because of the lacking instructions and the overall fussiness of assembly, but this is otherwise a pretty solid product. There is abundant mounting hardware included to mount different brands and types of hardware. Solid addition to my gaming rig.

I recently purchased the Hikig 2 Set Desk Mount for my flight sim game setup, and I couldn't be happier with the results. This mounting system is a game-changer for anyone looking to enhance their flight simulation experience. Firstly, the build quality is outstanding. The mounts are sturdy and well-made, providing a reliable and secure platform for my Logitech X56 HOTAS, and are easily detachable by just the simple pulling a lever. I was impressed by the durability of the materials used, ensuring that my expensive flight control peripherals are held in place safely. The set-up was relatively easy, and only took me around ~30 minutes to fully set up both mounts. It's versatile enough to accommodate various setups, and you can easily change configuration if you ever change your HOTAS set-up. What sets the Hikig Desk Mount apart is its stability during intense flight maneuvers. I no longer experience the frustration of my joystick or throttle slipping or wobbling during crucial moments in the game with them just sitting on my desk. The mounts stay firmly in place, providing a realistic and immersive flying experience.

Overall: Very pleased with the HOTAS mount, it took a bit to assemble but once together it feels sturdy, firm, and well secured to my desk while being easy to unclamp and store. The variety of configurations and adjustable position all work great, though it does require you to loosen screws to alter the height/depth this also means that once set it stays put and there's no fiddly knobs or other hardware taking up extra space. Pros: -Very customizable, fits a number of different HOTAS styles and has two different mounting platforms. -Assembly allows for creativity and modification if need be for a wide array of configurations, even upside down to increase height relative to desk instead of the standard lower than desk option. Though for some unorthodox configurations you might need to modify or bandsaw off some of the excess central/vertical column to prevent monitor view block. -Very stable once assembled and tightened up. -Very nice clamping fixture. Cons: -Exact number of assembly bolts/nuts. -Requires assembly(not really a con but some reviewers didn't seem to realize this was the case so mentioning it as both a pro and a con.) -A few washers would be a great addition to help HOTAS like the Saitek X52 which use the slender mounting bolts to better secure to the bar type bracket. The slide nuts would be a perfect fit for this had there been 4 extra to use, but the lack of extra led to me borrowing a few larger nuts from the plate style bracket mounting hardware to use in place of a washer.

Easy to assemble and the sliders let you set it up really easily. The clamps don't have the range I would like but the build quality and functionality are exactly what I needed for star citizen. Came with 2 full plates that have cutouts for a range of joysticks so you can screw them in and not have to worry about stability. Good price Quality material Provided solutions for a range of devices

Updated - I received a replacement and the height-adjusting bolts were removable. I suspect the reason the first set wasn't removable was due to rust in the assembly. The replacement contained the same kind of bolts, but these were removable. One of the bolts, though, had a substantial amount of rust and gunk down in the threads, and I needed a small wrench to remove it. I cleaned the bolt and the assembly out. Even with a wrench, I was unable to unscrew the bolts on the previous one. Once assembled, the mounts do just what they say on the tin. Assembly is a bit tricky and as other reviewers have noted the instructions are more of a general suggestion than an accurate depiction, but once you get the first one assembled the second goes very quickly. They are so far sturdy, and I'm able to keep my controls at a more comfortable height with them. They're easy to remove when I don't need the HOTAS, and they clamp back on my desk without issue. I'd like to give more stars, but there are still some quality-control issues with the parts. As mentioned above, one of the height-adjusting bolt assemblies had rust and gunk in it. The replacement unit had a lot of metal shavings in some of the parts which were an unpleasant surprise. 3 stars from me now, up from one. Prior review: The height-adjusting bolts on the clamps I received are not removable, even with a wrench, and the clamp thus can't be mounted in the clamp assembly. The bolts do not match the image in the assembly instructions, and they are not the same as those shown in other reviews. I was unable to find contact information for the manufacturer to request assistance, and am instead returning this item.

This is a great product, if you're paying the discounted price around $80. While I do see how the original price is justified through the good materials used in this mount, they're a bit overly bulky in that they overcompensate in order to accommodate all the different types of HOTAS setups. I definitely appreciate the fact that I can upgrade my HOTAS to something better/new and not have to worry about getting new mounts, but that leads to a product that comes with a ton of extra hardware and almost too much adjustability. The vertical bar is long enough that you will definitely notice the lost knee/leg room, and this is amplified by the fact that it's built long enough to be mounted on a standing desk and be used in a sitting position. That could be a good thing though, if you're looking for a mounting solution that can accommodate a weird/custom desk. To further speak to the hardware itself; everything is made out of metal, aside from good rubber and silicone for the faces that mate with the desk. it feels like a very solid product, and once all the nuts are tightened down it feels absolutely rock-solid. These mounts can even be affixed to your desk at an angle and won't introduce any play or instability, if it's tightened down properly. However, I do think that they don't pay the closest attention to quality control, as I had two parts that were defective upon arrival. One of the four L-Brackets had a hole that wasn't punched through and had a slug affixed to the side, which had been coated with the rest of the piece making it difficult to repair on my own. I did end up assembling the mount with the bad bracket, and it still feels very solid. The second part was one of the flat bars, which have sunken screws via a bevel in a perpendicular hole. The bevel on one of the holes, on one of the four flat hotas mounting bars was not beveled and thus couldn't be affixed with two screws, just one. Regardless of the missing bevel, it didn't effect the rigidity of the mount, even when both bad parts were installed in the same mount. While the lacking quality control was frustrating, I was pleasantly surprised to find I wouldn't need to have it replaced since it works perfectly fine as is with the bad parts. Overall, this is a great way to have a modular mounting setup that allows for future upgrades, and is built sturdy enough to take some punishment. I can already tell it's a night and day difference having your hotas fixed to a sturdy surface, rather than leaving them sitting on your desk, unattached. However, if you order this product, make sure to inspect all of your parts, prior to assembling anything, as everything is packed very efficiently in the box and returns may be difficult to repack. One more note to make: I bought this product to use on an L-shaped desk, and this may have been a blunder on my part. The mounts take up too much room for my case and make it impossible to fully pull my chair in for equal reach to my keyboard and hotas. This can lead to having to lean forward to use the keyboard whenever I need to switch back and forth on the fly. This definitely won't be an issue if you have a wider desk, and will most likely still be fine for other L-Shaped desks if it has a larger footprint. Make sure to take some measurements and ensure it'll fit your setup, and account for any angle you may want to put them at when using the mounts!

From the engineering side, these things are overbuilt by a ton. Heavy, metal, well-designed and manufactured. Very adjustable for my different types of mounting. Assembly was a bit tricky, but be patient and the payoff is worth the effort. NOTE: The instructions do not match the pieces in the box. There must have been a redesign and there are fewer pieces to assemble. Several of the steps on the instructions aren't necessary because the pieces are shipped already assembled, like the clamp levers. Notice the picture I posted with the base plate and the extra hardware I didn't need to use. I have a Thrustmaster for PS, and to make it work properly I didn't need the plate. I can't believe the quality of these. My sticks are mostly plastic and lightweight overall, so the brackets weigh more than what they are holding. Get them. Patiently assemble them. You will not be disappointed.