VCELINK Punch Down Impact Tool with 110 and 66 Blades, Network Wire Punch

I picked up this punch-down impact tool for some home networking projects, and it has worked perfectly so far. The build quality feels solid, and the impact mechanism works smoothly to seat wires properly without requiring excessive force. The tool comes with both 110 and 66 blades, making it versatile for different networking setups. The blades lock in securely and are easy to swap out when needed. I’ve used it on keystone jacks and patch panels, and every punch has been clean and precise with no loose connections. The built-in blade also cuts excess wire cleanly, which is a nice touch. For the price, this is an excellent value—it performs just as well as more expensive tools I’ve used in the past. If you're setting up or maintaining a home or office network, this is a great tool to have in your kit. Would definitely recommend!

I use this a few times a month and for the past few years it has work just as good as the higher end ones. The only problem I have with it is the two little pick tools on the sides kinda dont stay in all the time and since I dont use my at all I just taped them in.

This produce provides punch down for both type 66 and type 110 connection boxes. It is each to change heads, and use on creating connections. A cutter for wires is also included. There was some problem with removing the head, but the company provided help in making this work better; they did spend a good deal of time helping me.

I never had a new punch-down when I was doing public safety comms. I'd have loved to have this back then. (All we had were well-used - a lot looser than a new tool.) This is old-school, rugged, reliable, and quite solid. I picked it up to help with re-working a rats next of POTS lines in a home we just moved into. Combined with a 66 block, it made cleaning up the work of "pros" a dream.

Definitely NOT a heavy duty professional tool. But for an occasional punchdown wiring job, it is perfectly adequate.. Good value for your money if used as intended.

This punch will not cut off the ends on Levitron and Commscope jacks. I end up having to use a blade. Low doesn’t bare the wire and high cuts it about 50% Too bad though because Kleins and Flukes are so pricey. Guess you get what you pay for.

This has been a great tool for cleaning up the wiring in my closet. The blade is much sharper than my previous tool and almost always cuts the extra wire cleanly which means less time trimming things separately. The hook is also good if you need to re-wire a block.

100% garbage. Stop functioning on first Jack termination spring no longer works didn't even make it through one Jack punch. I would not recommend this to anybody who needs to get a job done it will not get you there.

Solid tool which works great and comes with a very handy cable stripper. I watched their YouTube product video showing how to punch down a cable and I was on my way. Saved me having to pay someone to come and do my connections.

El impacto es muy bueno ,queda el cable bien ponchado a la primera, la recomiendo bastante, y el material es de alta calidad 👌

[UPDATED] Upgraded to 5 stars! After using it more and now paying attention to assure that the spring tension is low when using on Keystone blocks and making sure to slightly tilt it to its blade-cutting side, it works rather well. However, I have noticed that often, while it punches down ok, it often does not cut the wire off as it's supposed to. This isn't a deal breaker as I carry tiny side cutters, very sharp, to get its point down to where the wires are. For the price, it's good enough. ________________ original review below ________________ This does work, but even with the spring tension set to high It still requires a lot of pressure to get it to snap. On lighter Keystone jacks, like those inside those wall-surface-mount types, the pressure is so strong that it could crack the PCB that the keystone jack is soldered to. With those, I just started using one of those little plastic punches. For bigger jobs, like with BIX blocks, it's probably perfect. Still, good tool, just be careful with spring tension. Also, keep checking the tension knob, because I've found that after some punches, it seems to flip itself back to the stronger setting.

It's convenient tool for working with different keystone. I hope, will work long time

I have spent close to $100 on Klein and they last about 4 years. This one was under 20 and has worked the same. If it lasts more than a year it’s a win.