Autel Scanner MaxiCheck MX808S, 2026 US Ver of MaxiCOM MK808S MK808Z, Full Bi...

This scan tool, in my opinion, is an excellent advanced piece of equipment! If you are a do it yourselfer, or a maintenance garage owner/technician this, is an absolute must have. I've had this scanner for about two weeks and I have absolutely fell in love with it, because, I have not only found problems with my cars in issues not heard of before to my knowledge, but a ton of diagnostic time and effort had been effortlessly applied to getting my car and my neighbor's vehicles sorted. I did not know you could create work orders, print add email yourself and/or your customers all issues and corrections made to each pdf work order created and the best part it is fully updatable. ThisI find amazing, it is like getting a work order from the dealership! I personally have not had a chance to go through every bit of the scanner, however I will say this...., for what I have used, it is generally user friendly and super accurate. I have searched for about 2 months, and I found that this was the best scanner for the best bang. Customer support is AMAZING! I had almost bought 2 different competitive scanners, (1) was just was good in terms of answering my technical questions, but simple did not truly work on a specific vehicle until 2005, and (2) the other took so very long to answer my questions. The Autell MX-808 was recommended to me because of the type of support I was looking for plus the reasons I personally stressed via my expectations in regards to how customer service is suppose to be (in the United States). The graphing is amazing and if you own a focus, in my opinion, buy this particular scanner, this has been used enough times it paid itself over more so in NOT paying diagnostic fees. Here is an example my neighbor thought his check engine light was due to a faulty gas cap, it was, via through the cmdcs, but the dtc code was for bad heater voltage to the downstream o2 sensor (money saved on not buying a new part for a non faulty fix for no reason, this saving money for not throwing parts at a problem that was not even a problem). I thought I had a faulty o2 sensor due to a p0420 code, because of this particular scanner's detailed graphing and capabilities, I had made a determination to not replace the downstream/upstream o2 sensors, after showing the values and graphing there were consistent rear o2 sensor readings and the extreme fluctuation of the upstream readings (this proving the sensors were working correctly), all I needed was good fuel treatment and boom!!! No more p0420 intermittent code. This is NOT just a scanner, but a scanner with many hidden gem features that if you decide to buy it, you need a day to just play with it, very awesome. This is the most advanced scanner I have ever used, and for my expertise level of automotive mechanical skills this is well worth more than I had imagined and I have no need for any desire to buy anything different. Thank you Autell for such a wonderful product I highly recommend buying this scanner, if not please consider other Autell products, you'll be disappointed if you didn't (again, in my opinion) and I will definitely be looking at Autell as my primary automotive diagnostic company of choice.

Most honest review here, i bought it with my own money. This is an amazing scanner. I’ve used some really good ones, I upgraded from an Icon T7 to this and am amazed by the functionality and accuracy of this scanner. Way better than the Icon T7 IMO. More service tests and functions. I’ve used top dollar scanners as well and this is up with them. Obviously not as good, it is wired and it can use A rubber case if there’s one available. But overall review, amazing tool. It does cost $125 USD a year but comes with one year free. It said two, but it’s one year free. Update it as soon as you get it there will be about 80 updates and takes about an hour. Scans every type and model automotive. 10/10 recommend. Great value, good size / weight, easy to use if you know what you’re doing. Other than the update being slow, it is very quick to diagnose a car. Plug and play, takes about 30-40 seconds to scan. I searched for two weeks to find a good scanner. This review is so that you can skip what I did. It’s a great tool for professionals or advanced techs diy or whatever. Not for beginner techs or someone without knowledge of automotive until you learn more. This tool is great, can’t say it enough. Very surprised with all the tests you can run on this thing.

The Autel 808s was a great purchase. I have a 2013 GMC Sierra 2500 diesel that was giving me the message that my diesel exhaust fluid quality is low and started to limit my speed. The auto shop wanted to charge me $400-$500 just to diagnose it. I decided to buy the Autel instead and I was able to figure out my issues. It helped me figure out the code and gave me my nox sensor readings while I was driving where I saw that my downstream sensor was giving erratic readings. I am working on replacing that sensor now and hopefully it will work. I was also able to use the Autel to run a diesel exhaust fluid quality test and it passed and cleared the previous code and I am no longer speed limited. While I may get the message again since the nox sensor is giving me inaccurate readings, I at least know that I can run tests to get it out of limp mode without having to take it to the auto shop. The Autel scanner has already saved me hundreds of dollars and has paid for itself. I was also getting a code for a fuel injector issue. The dealer I took it to would only tell me that the code was for injector #5 and they did not give me any other helpful information. I paid $200 for them to just read a code. I was able to use the Autel to view my fuel balance rates and determined that the injector I was getting the code for was a little out of spec but nothing to be too worried about yet. I am very satisfied with my purchase and I feel so much better that I no longer have to rely on auto shops to give me information on my truck.

Great product. 10/10 After registering the device, I updated all the software. Then ran a check on my 2016 Mitsubishi Pajero Sport. ***** It sorted out this problem I had - and saved me $150 trip to the dealer. ****** I had a 'DPF service required' warning on the dashboard. Even though I had the dealer do a regen about 6 months ago. When I scanned the car with my cheap OBD2 scanner it came up with an oil level too high fault. Checked the oil and it was high. So I changed the oil but I couldn't clear the fault code. It just wouldn't clear, even though the oil level was perfect. I thought I must have a faulty sensor. Then I scanned with the AUTEL MX808S and it gave the same error code. Then using the AUTEL I did an oil change reset function, which I couldn't do on my cheap OBD scanner. This tells the ECU that an oil change has been performed. Then I cleared the oil level too high fault code and it cleared and the DPF service warning cleared as well. Without this tool, I thought I had a faulty oil level sensor and would have asked the dealer to check. Who knows what that would have cost me? And they may have run another DPF regen, which my car doesn't need. (With the AUTEL I'm able to check the soot levels in the filter, and do a manual regeneration if I need to) I do the servicing on my own vehicles (as much as possible) and this tool is going to be a game changer for me. I was considering selling my diesel and buying a petrol, because I'm sick of not being able to fix DPF issues. Now with this scanner I may just stick with my diesel. 😀

Tool works great, really solid build quality. Software is fairly intuitive. Worked well to bleed my ABS.

Good

brought for my brother-in-law, who is pleased with the gadget and would suggest it.

What a fantastic piece of kit. I have a 2001 Nissan Patrol/Safari that uses Consult (not ODB2) but has an ODB2 port. This is the only device that I've been able to buy that actually communicated with the ECU, read the fault codes, and was able to delete them. Extremely happy with my purchase.