ISSYAUTO Third Brake Light Compatible with 2009-2014 Ford F150 3rd Brake Light Smoked Rear Cab LED Brake Light

I was expecting more bright from this light but the fact is oem is brighter

You should probably replace your brake light seal by now if you haven’t. There will be nothing left. The seal costs $15, and this light is not much more and comes with its own seal. Very bright, easy install, get one now.

The product was as described. There are no instructions as others have said. If your buying parts for your vehicle you should have a slight clue how to use tools and have basic mechanical ability. That being said the install should only take a few minutes. Remove the screws that are in it and use the screws from the light on the truck. Hold the new LED light next to the OEM light after you have removed the screws. Look at how the bulbs are arranged right to left. Twist and remove the bulbs from the old fixture. Take the 3 bulbs out and put them in your pocket. Hold the new fixture in place. Check that the wire ends on the new fixture plugs are routed up over the end straight. Plug them in where you just took the bulbs out of. Line up the notches and twist lock back in place the same way you took them out. I replaced it because I saw water running behind the OEM light and I like LED lighting. A bit pricey for what it is, but easy install quick shipping overall good shopping experience. Looks good on the truck and should keep water out of the cab. I didn't silicone the new gasket or put any adhesive on it. It is plenty thick so tightened it down well. Don;t over tighten or you will break the plastic. Go even amounts side to side. I would buy again (shouldn't have to if it lasts ) for my 2013 F150 5.0L super crew XLT.

Perfectly replaced the stock one and performed really good.

This product was very nice would definitely buy again ..as others stated gasket to seal light is very cheap almost fell off replaced with weatherstrip and no leaks whatsoever..these are very bright leds they match my recon taillights perfectly..and looks nicer than recons 3rd brake light..you do not have to tap ,splice ,or solder they are simple to plug in took 30 seconds ...screws that come with unit are not for mounting purposes..they are provided to keep the unit together discard and reuse oem screws..do not over torque just snug them up.. mine did not crack I snugged up with light duty screw gun I recommend useing Phillips screwdriver... but my oem screw head stripped so I used a 6 mm. Socket to snug up .would recommend for the price it can’t be beat you won’t be disappointed .. Update : 1 month later and about 20" of rain later no leaks or yellowing.. lights are nice and bright ...the foam weather strip i used to replace is super soft and comformative it compressed to cabs mount perfectly and compresses super thin thinnner than oem gaket or gasket that fell off. When product arrived..would recommend .