Stanbroil 31 Inch Drop-in Round Fire Pit with Spark Ignition Kit

Great product for rebuilding or building a new fire pit. I took an old gas log fire pit to a modern glass pebble fire pit . Works great

I had an existing pit made from Home Depot/Lowe's wall block. Dropped in the assembled pan, cut one wall block for the included igniter and control. I added a 10 ft extension hose to reach a hidden propane tank. Worked the first and every time we've used it. Great for smores with the grand children.

Awesome replacement parts

This fire kit is priced high. I searched for a comparable one, but I couldn’t find one. Order this one and it was very well made. The only issue I had was the plastic threads on the igniter. It will not get as tight as I would like. Other that, I would have preferred a knob instead of a key to adjust flame.

Overall the burner kit works well after some issues (to follow) with a consistent flame and nice amount of heat. As in my photos, I built my pit from 7" x 12" concrete garden blocks. Setting the control panel (on/off and static starter button (2nd photo) required it to either be recessed almost 6 inches back into the pit in order not to kink the in or out line from the controls. The alternative to this would have been to change the fittings on either side with 90 degree fittings from a hardware store but I feared doing so as it would have broken the sealed fitting as shipped and possibly broken any warranty. Otherwise, I'd suggest a fire pit with walls that are less than 4 inches thick. The seller recommends, by their calculation on the product page, 50 lbs of lava rock/glass for the tray of a 25 inch pan. That is excessive! Twenty pounds of lava rock and 10 pounds of colored glass on top were sufficient (I returned 20 pounds that I bought as it was unnecessary.) I was having an issue with the fire burning well for 30-35 minnutes then dying. I discovered, using soapy water, that my propane tank had a tiny leak and purchased a brand new, unused, tank and had it filled then double checked with soapy water if there were any leaks. It has burned well since then. Starting it seems to be best by 1) turn on gas at the propane tank to full output 2) turn the control panel key all the way left, to the full ON position 3) press and hold the static starter to ignite. I then turn the key valve on the panel a little bit lower with little effect on the flame. It uses propane at a good clip, 1/4 of a typical 5 gallon tank after two, 1 hour burns. I purchased a cover from a different vendor on Amazon for considerably less than the cover suggested by the seller. Overall, it's a good burner that isn't difficult to set up, but one must be sure there's nothing that leaks or kinks to get a good flow of gas and a good fire.

Excellent product. Their technical support is top notch...

Bought a fairly expensive $800 aluminum fire table only to find it came with a rather chintzy painted steel fire bowl. After 3yrs (with being covered when not in use), the bowl disintegrated. Instead of trying to patch the holes and failure points, opted for this PERFECT solution to my problem. Literally dropped in and away I go. The original metal cover no longer fits flush (not a big deal) and I cover with a vinyl waterproof cover. This fire bowl replacement is the all in one solution that seems bomb proof.

Good heat with nice pattern. Easy to hook up. Great product.

This is beautiful! We replaced an old rusted burner that was in this fire pit from the previous owner. I could not be more pleased. It is larger than I expected and it fills the pit nicely. It was easy to assemble as shown in the video and lit up without any problem. We did try the starter without a battery - but soon realized it was not installed. I would highly recommend this product. It is beautiful and very well made.

Works great well worthbthe price my customer is happy. You will need at least 6 bags of pummis and round rocks and it took me a while to find good logs to go with it but there are 13 inch logs that i mike with the stupid 8 inch pkg that i bought

We bought the 19" kit to replace a rusted our pan from our old pit. Assembly was easy! Fit is perfect. The open on our existing pit is 21.75". But the 19" pan tapers out and there is a 1/2 lip that fits perfectly. I have to figure out how to mount the face plate for the dials but that's a me problem, not the manufacturers. The flame is a bit weaker than I'm used to but I am very happy with this product.

Decided to swap this in to an outdoor fire pit instead of burning wood. Have used it a lot more as a result. Very good quality

I purchased this to finish off a fire pit I was making out of an old wine barrel. I have to say that it was straight forward to put together and the fittings were easy to attach. After completing the project I added the recommended amount of cut glass to finish it off. Having the push start was a no brainer so that it is easy to start and the recommended hose attachment ensures no annoying whistle noise will occur over the time you use them. These do go on sale from time to time so keep an eye out on them. All in all, I am happy with this purchase.