Miuzei Raspberry Pi 3 B+ Case with Fan Cooling and 3× Heat-Sinks, 5V 2.5A Power Supply with On/Off Switch Cable for RPi 3 B+, 3B, 2b

Love this case! It seems difficult to assemble at first, but as long as you keep all of the pieces in the correct order as you assemble, it’s actually very straightforward. If you let all the pieces get mixed up, it could be quite tedious. It feels high quality and looks clean and neat, the three heatsinks are a nice touch with the 30mm fan as well! Even on high mode, it is not very noisy and I can feel the air being dispelled so I have no doubt about the ability to cool the board. This feels much safer than the board just laying around of course and the thickness feels very secure. I’m a big fan of this thing, especially for the price!

Works Great !!

Constructing the case around the Rpi was a bit of a chore, but what else can you ask for, it comes with a built in fan cooler and 3 heat sinks, I highly recommend this case, the transparency is cool as well its nice to see the inner workings.

This is an excellent Raspberry Pi case plus kit, it is exceptionally well put together and feels super premium. The included power supply is able to power the Raspberry Pi 3 without any under voltage warning (unlike all the other so called 5V 3A supply that I tried so far), and the clear acrylic case has a very nice fit and finish and looks great, providing good protection as well as access to all the ports. The kits is well thought out and includes all the parts and accessories, heat sinks, stickers, bumpers, clear instructions, screws, fan etc... it even includes an extra screw and nut in case you accidentally drop one. With the included fan at low speed mode, my Raspberry Pi's steady state operating temp decreased from 65C with the bare board only to 48C with this case setup, with no more undervoltage or soft temperature limit warnings. Good fit and finish and visual appearance Good physical protection Good thermal management Good power management Easy assembly with clear instructions This has my full recommendation

As a brand new entrant into the world of Raspberry Pis, I didn't really know what I was doing (I still don't, but I didn't then either) and this case had a fan which seemed nice. It is a pain in the ass to put together. I love it. The instructions were excellent and I had absolutely no trouble understanding what to do. I've been messing with computers since they ran 80286s so I'm by no means an amateur but I can see where it's easy to go wrong on this case. I recommend laying out all the layers, one behind the other, putting the screws through the bottom layer to act as guide posts, and going down the line adding pieces. Once you're done, you can take the screws out two at a time and flip them so the heads are on top, or not. No big deal. The heat sinks were the perfect size and the fan worked great. I don't understand why you would possibly want to use the 3.3v pins - I literally could not hear the fan at 5v putting my ear directly against it. The power supply is adequate as far as power goes - I haven't gotten any lightning icons in my tray. The switch is a nice addition since there isn't any way to remove power from the Pi short of yanking the cord. Overall this seems like a great case. I have a sample size of 1 so far so take it for what it's worth but it looks really neat, the fan works great, and CPU temps never really get above 32/33°, which is nice.