Rust-Oleum Home Interior Floor Semi-Gloss Pearl Gray Coating Kit

This stuff is amazing. I wanted to paint a floor in one of our bathrooms in stead of paying thousands of dollars to replace the tile, and it worked great! We originally had an old school green tile floor and now we have a lovely black floor. Love it!

I'd been avoiding refurbishing my 80 year old stairs in my house. So many options and ideas, and I wanted something simple that I could tackle myself, and just breath some new life and a clean look to my steps. The hardest part was making sure I didn't need anything from the upstairs while I waited for the recommended drying time so I could actually use the steps in between coats. I painted the flats black, and the risers white. The paint applies very smoothly, but be sure you're using at least a medium quality brush. Very little odor from the paint or the clear coat. 3 coats of white on the risers and sides, and 3 coats on the flats, and I still have almost half a can of each color left over for touch ups down the line should I need them. The clear coat dries to a medium gloss, and you'd swear it was poly or urethane. The clear coat appears milky in the can, but it's ready to go, just shake and go. It's a bit runny, so be sure you are using good lighting and get all your brush strokes evenly. I also applied pre-cut non-slip carpet treads after I was finished, so all the wear and traffic will be applied to the treads. So we'll see how this paint and clearcoat measures up over time. I didn't even use a 1/4 of the clear coat can, so there's plenty left over for another application, or just to use as a yearly maintenence. Well worth the investment, and my stairs look great!

I love this product! I was looking for a lower cost option to an epoxy floor for my basement project. I found this product and added a glitter additive (specifically for paint) and this was the end result! It was pretty easy to use and very low odor. Some words of wisdom: Spend time on prepping the floor. I painted over concrete and spent hours cleaning it. I bought an etching acid to get it perfect before I even considered painting. It was a pain, but payoff was 100% worth it. Paint two coats of the base coat. As tempting as it is to lay it on thick and/or paint a second coat right away, wait for it to fully dry (24 hrs) before painting the second coat of the base. I made this mistake and ended up pulling up the first coat in some spots. It was salvageable by waiting a full 24 hours and repainting a second coat. Don’t skimp on the top coat. I did just one coat, but definitely didn’t skimp. Even so, I still had more top coat leftover after it was done. Overall, I highly recommend this product for a concrete flooring option that is more cost effective than epoxy!

Very happy with the final result. Can’t speak to Joe it will hold up, but keeping my fingers crossed. I will say that a needed 2 coats of the black to really cover everything, but I used much less of the top coat glaze. I used 3 quarts of the black but only used one quart of the glaze … which now means I have 2 cans of unopened glaze that I don’t need. That excess is the reason I’m giving this 4 stars instead of 5.

AWFUL!!! Bought 2 sets and 1 was expired and chunky. We used the other and the clear coating does not hold up!! Everything chipped and was depleting after 1 week. Barely sealed too

Was very skeptical about this paint but if you follow the directions exactly, this kit does a pretty good job. I painted over some ancient floor tiles and was really impressed with the outcome. Some advice, paint small sections at a time and examine closely for dust, hair, etc., and clean off immediately and before applying the poly, lightly damp mop the floor to pick up any particles as well.

Remodeling a 1960s kitchen in a 1914 house has to be strategic. The first thing we did saved time, energy and money! The blue floor tiles did not have to be removed after all. The kit system was very affordable, instructions were easy to follow, and our new floor is gorgeous!

This two step tile paint is an easy, cost effective DIY project. I used two colors, the first is the pearl grey which shows a blueish tint and the second is the aged grey which turns out more dark grey. I used a gloss finish for both and I’m very pleased with the results. You can have new floors within 30 hours! I didn’t sand the tile, I just cleaned with the suggested Krud Kutter and the paint had no issue adhering. Make sure you use a foam roller and use a brush to get the edges and the grout lines. The paint will look blotchy and uneven until it fully dries but one coat will suffice for each step.

جيد

Fácil de aplicar y muy buenos resultados lastima que no se tengan variedad de colores

When we did the paint and let it dry for over a month, and moved back our furniture it started scratching from the easiest movements..and whenever we dropped the tiniest drop of liquid it changes colour and leaves a weird looking stain. If I could attach pictures I would but it's not a feature. Biggest waste of money ever!!