QWORK Solid Angle Plate Set, 2 Pcs Triangle Angle Block, 30-60-90 Degree&45-45-90 Degree, Precision Machinist Measurement Tool

I wanted something to quick check blade alignment for my saws in my woodworking shop. These fit the bill. They are accurate for what I need. If you are doing precision machinery and you are worried about 10,000ths of an inch you'll want to pay for a much more expensive and higher precision tool. However for wookworking these are perfect. Well machined and they come in a very handy storage case.

The blocks themselves are as close to specification as any I have worked with. 90/30/45/60 all check out. Flat and finish are more than expected, and the edges are clean and sharp. When placed on a granite flat, and using a green laser, no light comes through between surfaces. What I received is everything described on the page and more. Five stars for the blocks, but the case is not so nice. One triangle block's insert cuttout is much too large to hold the block securely. Also I would recommend ditching the foam completely and wrapping the blocks in soft cloth or non-corrosive paper before storing in the case. Even with the case issue this set was a fantastic buy for me. RECOMMENDED

Nice accurate angles

Great tool to have to make flats on hex fitting. Would recommend this to other in the field.

Great set up tools.

Decent for the price. Not high precision but for quick setups it’ll work. Needs a little deburring like everything form China.

I took these angle blocks to work and setup a sine bar with jo blocks on the surface plate. All have inspection certificates. Using a tenths indicator I saw no movement while moving across the faces of the angle blocks. As far as I’m able to tell they are near perfect!

Accurate, reliable set up blocks.

These are excellent little set up blocks for saw blades and such. I don't have a high end super accurate protractor to check if the angles are perfect or within a given tolerance. If I did, I probably wouldn't need these. I do know they work very well for setting up saw blade angles as well as for making hexagon and octagon cutting jigs. They work well for dialing in the miter saw as well for 45 degree bevels and cross cuts. Edges are very straight and sharp so they are pretty accurate and precise. I am satisfied.

These are actually very good quality angle blocks and very accurate. I took a chance on these because I needed something not too expensive to set up my miter saw, circular saw, and table saw, and these work great. They are very well machined with nice clean edges and faces with no burr and almost look polished. I had them checked for their angles in a machine shop and they said there is a -0.001° over the longest length of both blocks, and the machinist said that he would use them in his shop so are perfect for woodworking. They came in a nice little case individually wrapped in a wax paper and covered in fish oil to prevent any rust (the Rolls Royce steel for body panels used to come to the press shop I worked in covered in the same fish oil to stop rust). I used some brake cleaner to remove the fish oil and applied some dry lubricant along with a silicone gel pouch to keep them rust free. All in all a very good purchase especially for the price paid and will be used a lot in my woodworking shop.

I bought these with low expectations. At $25 I was skeptical about the quality and accuracy. To my suprise they were great. Angles are spot on , all edges are evenly ground and a nice storage box.

Quick way to check saw to square and angles

Très bon produit. Bien machiné. A+