Universal Speaker Stands for Surround Sound -Height Adjustable Extend 33.3”to 45.1”, Floor Speaker Stand for Satellite & Studio & Bookshelf Speakers up to 11LBS,1 Pair Black, PSSS2

These Perlesmith universal speaker stands are exactly what I needed. Super easy to assemble, height adjustable, and they feel really stable and well-built. The black finish looks clean and they blend nicely with my setup. Holds my surround speakers perfectly (both bookshelf and small monitors). No wobbling, and the cable management is a nice touch. Much better quality than I expected for the price. If you’re looking for reliable stands without spending a ton, these are a solid choice! 👍

Great product! Very easy assembly, sturdy/stable and properly aligned threads etc… excellent 💯

These stands have both strengths and limitations worth noting. Cons: The stands are not height-adjustable. Speaker wire must be threaded through the pole before attaching the base plate, which may complicate setup. The top plate only uses non-slip pads to hold speakers in place, with no additional securing mechanism. Pros: Attractive design, featuring a glass base that lends a modern, upscale appearance. Straightforward assembly, easy to put together with minimal effort. Stable on both carpet and hard flooring. Sturdy enough to support bookshelf speakers (currently holding Klipsch R-41M speakers without issue). While the lack of adjustability and limited speaker security could be drawbacks for some, these stands are stylish, easy to assemble, and reliable once in place. They are a solid option for anyone seeking a simple and visually appealing solution to display and support bookshelf speakers.

Love these stands. They were easy to put together and they look good in my living room.

I needed taller surround sound speaker stands to clear the sectional sofa in my front room. This Perlesmith stand was the only one I could find that was tall enough so despite its 11lb weight limit (my Klipsch speakers are 13.5lbs/ea) I decided to give them a try. Long story short, they work great for my needs. Assembly was very quick, easy & straightforward, no complaints about quality. Speaker clamping is uneven but I don't consider that important for my needs (although I do consider speaker clamps to be a 'must have' to prevent the speakers from being accidentally bumped off the stands). I did ensure the height locking ring was as tight as I could manage to prevent unwanted collapse and I added the same anti-tip safety strap I use on my table-mounted 100" TV to prevent an accidental bump from causing potential damage or injury. These are decent & basic speakers stands that serve well so long as you remain cognizant of their weight/tipping limitations.

These are good looking stands and were quite reasonably priced. However, they are only held together by a pair of threaded rods that run through the hollow center post and screw into the top and bottom pieces. The center post isn't really attached to anything at all, it's just held in place by the top and bottom pieces. The speakers I'm using with these stands are fairly lightweight and seem to be supported well enough for now, but if you are using heavier speakers with large magnets or active monitors with integrated amplifiers, I advise caution. As long as the stands aren't moved, this delicate arrangement of threaded rods should tend to hold, but I do worry that vibrations could work the threaded joints loose over time and cause problems. After all, these are meant to hold speakers, and speakers do vibrate. Even so I would still recommend these for setups with inexpensive speakers, where aesthetics are more of a concern than stability; if your speakers are not both inexpensive and lightweight, you may want to consider paying proportionately more for stands. Another issue I encountered with these stands is cable management. The hollow center posts could potentially have cables run through them, they do have openings at the top and bottom apparently meant for this purpose. However, there's no straightforward way to actually get cables in place; professional stands have an open channel that runs the entire length of the post so that one can easily just pull the cable through the stand. Naturally, this shortcoming can be worked around - other reviewers suggest routing the cables while assembling the stands - but it is a further indication of a product that isn't particularly well thought out. Even if you do manage to get the cable through the post, it'll still be visible at the bottom of the stand because the lower opening is above the bottom plate, rather than running through the bottom plate to the floor. Furthermore, I had hoped there would be some sort of leveling capability with the feet on these stands to help compensate for slightly uneven flooring. To be clear, this is not an advertised feature, just one I had hoped for. In fact, the feet can be individually partially unscrewed to provide a limited form of leveling capability, but then of course the same issues I've pointed out with the center threaded rods apply, vis-a-vis potentially loosening over time. Moving forward, since I already own these stands, I'll probably disassemble them at some point - before they have a chance to fall apart on their own - and apply threadlocker or PTFE tape to the threaded rods and feet to address my concerns about long term stability. I might even drill a hole through the bottom plate so that I can implement a tidy cable management solution. Until all that is done, I'll wish I'd bought better stands in the first place.

Holds my surround sound speakers perfectly and super easy to assemble. I also appreciate that the cables run through the stands so they are tucked away safely. Looks like it can adjust to fit much larger speakers for future upgrades. Very sturdy and solid bases that won't tip over easily. I'm going to get another set of two.

I have a pair of Boston micro 130x speakers that I couldn't mount using the Sanus speaker stands and these speakers also don't have the mounting holes on the back so I got these Perlesmith speaker stands instead. They work pretty well at holding my speakers in place and seem sturdy enough that I won't have any issues. I'm going to drill a larger hole in the weights that came with the Sanus speaker stands and add them at the bottom off these stands to sit just on top. This should add some extra weight so that these won't tip over accidentally. One thing that I wish got modified with these speaker stands is the tightening screws for each side only caters to flat boxy speakers. The Boston micro speakers have a tapered side so the fasteners on the sides were only able to hold on to a portion of the side of these speakers. However, it is a nice touch that there was double-sided felt tape included to help secure the speakers onto the stand. This gave me extra peace of mind. One tip when feeding the wire through the stands is to make sure to do it before putting the speaker on the stand and also do it while the poles are disassembled. In other words, do not assemble or tighten everything before trying to feed the speaker wire through just in case you have some difficulty getting the wire to feed properly. I was able to insert my 14 gauge speaker wire without any issues once I did this, by having everything loose and separated. The assembly was very easy and quick. The instructions were pretty clear and most of the parts I'm pretty self-explanatory to put together. I do also like that the base of the stand has adjustable mounts for uneven floors.

I just needed a pair of affordable speaker stands but didn't expect the quality to be this good. What a pleasant surprise!

It’s a shame I couldn’t find a good quality and strong stand locally, but I’m glad I found one. Perfect for the rear speakers of my LG Soundbar (S95QR). The tube isn't wide enough to let the power cable pass thru but still super happy with this one.

O pedestal é muito bom. Discreto, fácil de montar e atendeu às expectativas. Porém eu paguei quase o dobro de preço na taxação do produto. Algo que o vendedor não informa na pagina do mesmo.

Happy, good stands

Fit Denon bookshelf speakers perfectly