OVERTURE Matte PLA 3D Printer Filament 1.75mm, Matt Surface & Low Warping Filament 1kg Spool (2.2 lbs), Accuracy +/- 0.02 mm, Fit Most FDM Printers (Matte Light Brown)

I’m really happy with this filament. The color came out great, the prints looked clean, and it handled the details of my project very well. I used it to print a set of turtle-inspired hand display pieces, and the finished results turned out awesome. The filament printed smoothly without clogging, had great bed adhesion, and produced vibrant colors that really made the finished pieces stand out. I also liked how consistent the material felt throughout the print. The surface finish looked nice, the layers came out clean, and the final prints had a solid, quality feel to them. Based on my experience, I would definitely buy this filament again for future projects.

Just WOW!. I'll update with photos of my prints later on. I've been searching for matte filaments and there seems to be limited options. Not only have i think i found it, i dear say i found my goldilocks filament. Ordering 3 more rolls next week as I've been printing 24hrs a day since i got it a few days ago. Excited to try other colors. Roll was nicely wound and print quality is astounding, printing is very easily and was dialed very quickly. and i have zero complaints so far. Layer lines are pretty much invisible even at .2 layer heights. .13 is jaw dropping. Been printing an order for a local hobby shop and they at first didn't believe it was 3d printed as it looked multitudes better than previous filament I've used on their order. I've been printing on my mostly stock ender 3 v2. Only modifications are z-brace rods, bltouch, dual z and printed z motor mounts. Printing here the update NY winter is usually challenging as where i print in my home can be as low as 10c ( will be finishing my enclosure soon). Saying that my only struggle has been minor corner warping and bed adhesion. but i doubt that would be an issue in warmer rooms. The issue has been resolved though as i really squish my first layer (leaves very fine elephant foot that cleans quite easily with a sharp hobby knife or 220grit sand paper) since i print 7-20 parts at a time. Can't afford failures. I am printing on the stock textured side of the ender 3 glass bed. For those with an ender 3 i do Hot end at 195-200c, 60c bed temp at 40mm sec (as i prefer quality over speed ) retract 6.5mm 50mmsec, default cura coasting settings and filament equalizer enabled. 75%-100% fan after initial 2 layers. I'd also like to add that my printed upgrades are done in hatchbox abs for strength and temperature resistance. But now any parts that aren't at risk of high temperature exposure I'm using this matte black pla because it looks that amazing and is suitably strong. If I run into any issues I'll update accordingly. Update 7 Days Later So i ordered this filament for an order for a hobby shop. Printing drag racing slot car stands. I printed 96 of these in 4 different filaments. After the first 28 this filament arrived and after the first test prints i was amazed and now only use this filament. I went through the whole 1kg roll in 6 days. Ordered another and already been printing into the 2nd roll. I've updated my nozzle temp to 210c and I'm using a .8 brass nozzle. A worth while mention is these stands i print they're only 3 bottom 2 top, 1 perimeter and 0% infill. And they're almost perfect, very light and just as strong as previous prints with .4 using 3b 4t and 2 perimeter. The watering can is from thingiverse and printed at 60mmsec, 3 bottom and in vase mode. Also worth noting i check filament diameter periodically as i go through the roll and so far it's been between 1.72-1.77mm. Overall still my new favorite go to pla. I definitely prefer a matte finish and this filament definitely delivers.

The Tan Matte PLA is an absolute DREAM to print. It sticks to any bed I throw at it, never feeds poorly, and the prints come out incredible. I'm on my 3rd spool, and wish all things could be made in this filament. The only downside I can come up with is thinner things can be brittle, but that's what you use PETG and other things for.

I love this filament. It prints really smoothly and I haven’t had any problems with clogging or warping. The spool size fits perfectly on my printer and feeds without any issues. The filament diameter seems very consistent, which helps with print quality. The color is solid and not see-through (low transparency), which is exactly what I wanted. Overall, great value for the money — I’ll definitely be buying this again!

I absolutely love overture but I just bought 3 spools and all 3 are a tangled mess it would be unusable if I wasn't able to sit and watch prints or unwind a lot of it. I still gave a 4 star because this is first time I have experienced this with this brand and prints turn out so nice and I love their matte colors, either way hopefully this doesn't happen again or often because it is a huge pain and I hate having to return stuff. Updated bought another spool and it showed up messed up again 3rd order like this and I don't have time to return and wait for another!!!!

I have been looking for a good beige PLA, and this one delivers. The color looks very similar to Duramic beige, but at a more affordable price, which makes it an easy choice. I have used Overture filament in other colors for years, and it has always been reliable. This one is no different. It prints consistently and gives solid results without needing extra tuning. If you want a dependable beige filament that looks great and costs less than some alternatives, this is a great option. Would definitely recommend.

Overeture has been my go to brand for years now. I have NEVER had any issue with their filament. It prints with no stringing - even sitting out in the open for months at a time in our Deep South Southern Humidity ... i.e. pretty constantly above 75% - so bad that all of our tools have to have a weekly coating of oil or they rust and the paper in our printer stays damp in the summer! The filament never clogs and has never been brittle. The finish is beautiful and smooth. And, for PLA, it's pretty tough. I print and sell lawnmower blade balancer adapters using this and my own personal set has held up for almost ten years in a rough, working, small engine shop! I cannot recommend Overture filament enough!

Caught this on Sale. Filament is great but the roll is an issue. Two different Black and One White got hung up due to tight spooling and the filament was jammed into the side. After 3 failed, half completed, prints I had to unspool every one of them and respool them. I have not had an issue since.

Manufacturer included some Easter eggs inside - an attachable print surface, and little measuring/removing tool for prints. PLA looks nicely manufactured. Quality goods!

Ich habe das TPU Highspeed Filament von OVERTURE in der Farbe leuchtblau auf einem Flashforge Adventurer 5M Pro getestet und bin insgesamt sehr zufrieden. Druckverhalten Das Filament lässt sich mit einer 0,4‑mm‑Düse bei 225°C Nozzle und 40°C Heizbett zuverlässig drucken, liefert aber auch bei 250°C noch vernünftige Ergebnisse (darüber habe ich nicht getestet). Die Haftung auf dem Druckbett ist sehr gut – teilweise fast zu gut. Besonders dünne Drucke haften so fest, dass das Ablösen schwierig sein kann und gelegentlich zu Beschädigungen führt. Supports lassen sich bei 0,31 mm Abstand ordentlich lösen, darunter kann es unter Umständen etwas schwiereiger werden. Allgemein sollten allzu filigrane Elemente, die Supports benötigen, vermieden werden. Materialeigenschaften Das Filament zeigt je nach Druckparametern sehr unterschiedliche mechanische Eigenschaften: - 15% Infill, 4 Walls: gut biegsam, erinnert an dicke Einmachgummis. - 7% Infill, 2 Walls: extrem weich und hochflexibel. Selbst nach starkem Biegen oder Quetschen kehrt das Material zuverlässig in seine ursprüngliche Form zurück – ideal für flexible, strapazierbare Bauteile. Leuchtkraft Das Material ist ein echtes Glow‑in‑the‑dark‑Filament: - bei Tageslicht wirkt das Filament weiß mit leichter Transparenz - im Dunkeln leuchtet es hellblau Am besten „lädt“ es sich durch direktes Sonnenlicht, danach leuchtet es die ganze Nacht hindurch gut sichtbar. Verpackung & Handling Die Verpackung war einwandfrei, der Versand schnell. Typisch für TPU zeigt das Material eine gewisse Feuchtigkeitsanfälligkeit, daher ist trockene Lagerung empfehlenswert. Fazit Ein hochwertiges TPU‑Highspeed-Filament mit starker Leuchtkraft, sehr guten Druckeigenschaften, hoher Flexibilität und beeindruckender Formstabilität. Die extrem gute Betthaftung bei dünnen Drucken ist der einzige erwähnenswerte Kritikpunkt, liegt aber eher am Material (TPU), denn am Hersteller/Produkt. Insgesamt ein vielseitiges und zuverlässiges Glow‑in‑the‑dark-Material für funktionale und dekorative Projekte.

Viene mal enrollado, durante la impresion se sale del carrete y da problemas de extrusion. No creo volver a comprar esta marca. Pesima adhesion

Great prints, used it on bambulab P1S with AMS, works well in AMS in its original cardboard spool, no clogging

I had the black and white matte bundle, and it's running through my P1S like a dream - nicely wound, no problems at all. After around 20 prints, the quality has been consistent and high. I think this might be my go-to brand in the future. Excited to try out the colour ranges.