APIELE (Pack of 2) 22mm 2 Position Selector Switch Maintained 1NO XB2-10X/21 (2 Position Maintained)

I needed too add a switch too trun on a extra fuel pump, and glow plug control on a old woodchipper.. This worked great. bit of a pita too get installed iff you cant reach and hold front and back with both hands.. and the screws can be a pita if its a tight area.. I suggest wire it up, before you mount it.. BUT.. I had something short out, and wires actually melted together, but the switch was fine.. even with a bit larger wire now. and a better relay added.. it hasn't acted up.. I use one side ie (left) too turn on GLOW plugs-preheater on a diesel, then turn it too its 3rd position (right) too turn on the fuel lift pump, and everything else.. and middle position is OFF... Then with just a push button next too it too start/crank.. Its better then a bunch of uggly toggle switches.. and fits in the dash control that has big 3/4" holes nice..

Well built. Works well. Size as advertised. Would recommend.

These worked out perfectly for a Forward/Reverse selector on a drill press conversion to VFD. Only strange part was mounting. Ring does not tighten to face plate as normal, must use a set screw from behind to tighten. It worked out okay as long as you can access screw in your mounting position. Good price and arrived quickly.

no issues, as advertised

These switches kind of look like telemecanique switches but the dimension are a little off. They are not interchangeable with telemecanique . But as long as I use these contact blocks with these bases and operators, they seem to hold up pretty well. The 22mm mounting hole fits. I use them in machines to replace bad failing switches and they seem to hold up. I like the metal bases and how they use the two screws to secure themselves to the panel. I had a problem with one of the screws that holds the contact block in place. It tried to strip the threads (dis-similar metals) but a spot of oil or grease or anti seize compound or assembly lube whatever will take care of that little problem. So I think the base is aluminum. Overall - very happy with my purchase. Will buy more as needed.

I purchased as a replacement for a similar switch on my boat lift motor. This one functions just like the previous and seems to be of good quality. It came in a two pack, so I have a backup if anything goes wrong with the first one. I will update if there's any issues. I recommend the switch.

Works as described

No issues, these switches work great