Storage Logic Foam Mattress Vacuum Bag with 4 Adjustable Packing Straps for Moving, Storage, Shipping, Vacuum Seal Mattress Bag with Packaging Straps (Queen/Full/Full-XL)

I was really dreading moving my heavy cal king foam mattress but this vacuum bag was a total lifesaver. It is made of a very thick and durable plastic that did not feel like it was going to rip or puncture while I was dragging it around. The seal held perfectly throughout the entire process which was my biggest concern given how much air those mattresses hold. The instructions were simple to follow and the vacuum valve worked efficiently with my standard shop vac to shrink the mattress down to a fraction of its original size. It went from a giant unmanageable block to a flat manageable piece that was much easier to load into the truck and take through narrow doorways. The included straps are a great addition because they kept everything tightly rolled and secure so it did not try to expand while we were moving it. I also really appreciate the peace of mind it gives for storage since it keeps out dust and moisture completely. After sitting in a storage unit for a while I opened it up and the mattress popped right back to its original shape with no weird smells or damage. It definitely feels like a high quality product that you could reuse multiple times if you are careful with the zipper seal. If you are planning a move or need to store a large mattress for a long time this bag is worth every penny for the convenience alone. It saved me so much space in the moving truck and made a two person job feel a lot less stressful. I am very impressed with how well it worked and would highly recommend it.

This bag works quite well, as long as you have the right vacuum for it! I have purchased and used this exact product twice so far, because I end up puncturing it every time I use it (more on this later). The first time I used it, I tried using my regular household vacuum cleaner (Miele canister vac). It worked a little bit, but the vacuum quickly overheated and shut off. Most household vacuums aren't meant to operate at maximum suction without a lot of air flowing through them (because they rely on the incoming air to cool the motor). The second time I used this bag, I used a large shop-vac (Rigid brand vacuum). This worked a LOT better and didn't suffer any overheating issues. If you want an even better vacuum, I have some more info later on. For most people, using a standard shop-vac will do the job nicely. Once you have pulled the vacuum, fold the mattress over and strap it up. Having a second person to help here is very useful -- one person sitting on the mattress to keep it folded while another person straps it worked very well. I used the included straps to hold it in half, then used some ratcheting straps to tighten it up even further. Note that if you use ratchet straps, put a piece of cardboard or something like that between the metal ratchet body and the plastic bag to keep from puncturing the plastic. The attached image is of a Purple 3 mattress under full compression. I think the compression is just as good as the factory does, but I didn't have enough leverage to actually "roll" up the mattress and could only fold it in half. Its still plenty small enough to fit in the back of a normal station wagon/hatch/SUV. Once your mattress is vacuumed and folded, you really should add some extra protection. You can wrap the mattress in mover's plastic wrap, or find some other heavy duty plastic/tarp to wrap this in. The vacuum bag punctures VERY easily. This happened BOTH times I tried moving with this. It's not the end of the world, as long as your straps are tight -- the straps will keep the mattress MOSTLY contained even if the vacuum is lost, but it will be a LOT more difficult to move around without the vacuum intact. Note that I punctured this even though I was trying to be very careful. I was moving my mattress with a helper down a short walkway between my door and the car. The mattress was very heavy, so we stopped once to put the mattress down and take a quick break. The bag touched a grain of sand on my walkway (yes, just a grain of sand), and this caused a minute puncture. It was enough that I could hear it leaking, but I couldn't stop the leak with duct tape or anything like that because of all the creases in the plastic. Within 2 hrs, the mattress bag vacuum was completely lost. So if you want the ultimate vacuum, I had good results using a four-stage diaphragm pump with a shop-vac as a roughing vacuum. Most people won't have access to this equipment, and probably won't need this level of vacuum to be honest. My shop-vac took the vacuum down to about 650 torr. I was able to attach a diaphragm pump using an NW25 fitting. If you remove and use just the O ring from an NW25 centering ring, it will fit over the inlet port nicely and creates a good seal once a vacuum is established (see photo for more info). I took it down to 40 torr and said "good enough" there. The majority of the compression had already happened with the shop-vac -- the difference between 650 and 40 torr was noticeable, but not enormous.

This bag works like a charm—provided you treat it with more delicacy than a Victorian ghost. I’ve bought this product twice now, mainly because the material has the structural integrity of a soap bubble in a breeze. The Vacuum Situation: Don't Kill Your Miele First off, leave your fancy household vacuum in the closet. I tried my Miele canister vac the first time, and it nearly staged a protest. These motors need airflow to stay cool; choking it down to max suction is a great way to turn your vacuum into an expensive space heater. The Pro Tip: Use a Shop-Vac. I used a Rigid brand model, and it inhaled the air without breaking a sweat. If you’re a total nerd like me, I eventually used a four-stage diaphragm pump to pull it down to 40 torr, but honestly, a standard Shop-Vac gets you 90% of the way there. The "Glass Onion" Durability Factor Let’s talk about the elephant in the room: the plastic. This material is alarmingly thin. How thin? It’s like trying to move a mattress wrapped in a single layer of wet phyllo dough. It has the puncture resistance of a high-end 1-ply toilet paper in a rainstorm. If you look at it with a stern expression, it might spontaneously develop a leak. Exhibit A: I was moving the mattress down a walkway and paused for a break. The bag touched a single grain of sand. Just one. That lone, microscopic pebble pierced the plastic like a needle through a balloon. I could hear the "hiss" of my hard work escaping, and because of the creases in the bag, duct tape was useless. Within two hours, the vacuum was a memory. Pro Tip: Once you’ve vacuumed it down, wrap the whole thing in heavy-duty mover’s wrap or a tarp. You need to protect this bag from the terrifying dangers of... existing. Folding & Strapping The image attached shows a Purple 3 mattress under full compression. It compresses beautifully, though I could only fold it in half rather than rolling it. Even then, it fit easily into a standard SUV. Get a Buddy: One person needs to sit on the mattress like they’re wrestling a giant marshmallow while the other handles the straps. The Ratchet Rule: If you use ratchet straps, put cardboard between the metal buckle and the bag. If the metal even breathes on the plastic, you’re doomed. Final Verdict If you treat this bag like it’s made of spun sugar and hope, it’s a lifesaver. It gets the job done, but just remember: in a fight between this bag and a stray cat hair, the hair is going to win every time. Prepare for the "sand grain" betrayal and wrap it in extra protection!

Worked as it stated.. it was so much easier to move the mattress and to store. This makes my life easier and that makes it a good buy. We bought one similar for a previous move. Unfortunately, it ripped. We learned a lesson of not grabbing the plastic part to move. Utilize the straps to prevent and stretch and rip.

Hey all. I had a queen sz foam mattress that I needed to return to C*****. I ordered this in a king size for my queen bed to return. I had read the reviews looking to see if anyone had done similar, but did not see such a review. I ordered the king size to for my queen size bed. I used a shop vac to deflate the mattress & Please note that there are no attachments needed. Just place it over the plastic opening once you remove the cap and turn it on. It sucked the air out of my queen mattress in less than 15 minutes. Someone had recommended walking on it as well, and I did that and I'm sure that helped to speed the Process. And I am glad that I ordered the king sized bag because I think that if the cover is too snug, it is more prone to tear. I was able to the mattress down the stairs, using a quilt beneath and loaded into my suv without a rip or tear. The staps did break very easily, so I used a big bungee cord. This was so much cheaper than renting a truck, getting help, etc. I wish I'd thought of it to market and sell!!!!!!!

The product was excellent. It took us less than 15 minutes from start to finish. We used a regular vacuum cleaner for this. No issue with leakages of the seams or anything. The straps held very well. We had some extra plastic so we used that to wrap it up in addition to the straps and also put some tape around to hold things together just in case. We had to transport a Caspar mattress to a new location six hours away. Everything stayed perfectly for the week that we had it wrapped up. Removing it was also easy. We just pulled open the seam.

It works. I had my doubts. I did borrow a friend's shop vac and the run time was way less than 15. I was low key kinda worried the vac would suck off the surrounding plastic around the suction port. It didn't. The port placement is a bit odd and I do recommend having a second pair of hands for someone to check and pass their hands on the seal. It's strange to me the bag is sealed but the double ziplock style seal is not fully sealed. I do think this product will expand over time which kinda sucks. Also like others have said I only got 1 strap so that's weird.

I’m giving this three stars because it half way worked. I bought this to store a king mattress and also for the ease of transporting it. First off you definitely need a much more powerful vacuum like a shop vac. A regular vacuum will take a very long time. The shop vac did great. The air opening could use some improvements, because when the compression and air extraction is about 1/2 way, it folds inwards making it difficult to extract the air. For a mattress this size you definitely need at least two people. The bag compressed very nicely and the mattress was able to roll. The straps were a little challenging, but they worked. The bag material is very thin and rips very easily. Within 20 minutes I had to put the mattress on a dolly to transport it into my vehicle. Somewhere in transition, a small hole or rip occurred somewhere because we could hear air escaping, and the bag started to lose compression. Within a couple of days the mattress was no longer compressed. I have used another brand and it worked wonders. I purchased this one because I needed it as quickly as possible and I was promised next morning delivery. However, it got here later in the afternoon, but that is beyond anyone’s control. If the material was a bit thicker, and the a stronger ring/lip around the air opening, I think it would be a great product.

Super

Bought a bigger size since my mattress is 160 cm wide but thin. Could probably have gone with the smaller size as well. Worked really well so far. Hope I won't experience any air leaks.

Bon produit, mais le vendeur devrait indiquer les dimensions maximum.

Funcionó perfecto para mi colchón Luuna tamaño matrimonial (MX), la bolsa es más grande pero aún así sirvió. Pude transportar así el colchón en mi coche sin tener que pagar mudanza. Recomendado!

Utilizzato per un trasloco, facile da chiudere e compatibile con tutte le aspirapolveri