Metal Automatic Winch Wireless Remote Controller System for 1:10 RC Crawler Car Axial SCX10 90046 TRX4 Redcat (Black)

This is a great little winch and is super sturdy. This one went on the front of my FMS FJ40 and looks amazing.

So easy to install,being I have a 4ch receiver and all slots are taken to run winch from receiver,I took one of the connectors in the pkg,(one with the deans connector,and think JST connector) i cut the wires off about 4-5 inches back and stripped the wires about 1/4 inch then off of my hobbywing ESC went back about 2 inches cut around the silicone to expose the wire this will be your + - red,blk,then soldered the two wires to according colors heat shrink or tape solder areas plug into winch receiver plug in battery and use a Paperclip to turn on winch receiver this way running direct from battery on each run,instead of using and extra smaller battery to run winch on itself,also had absolutely no issues with the remote,PLEASE NOTE that remote does not come with battery's you will need 2 CR2032 batteries and be mindful of that both install +side up,for my remote for the winch i used HD velcro and mounted to my radio for ease of use,this is mounted on a FMS FJ40.will buy again for another project.

I haven't tested too much out in the trails because it's snowy at the moment so they are all covered. One thing I did find is mine doesn't work in the cold. It's 15°F today everything else on the truck works good in the cold but this winch won't work until I bring it in to warm up

When it comes to add-ons for my RC models, Injora has a wide array of options for a reasonable price. This is no different, and was exactly what I needed. It fits the model I wanted it for, works just fine, and is exactly what I needed. It's convenient because it doesn't require an extra channel on the receiver, thanks to the included remote. It's perfect for most 1/10 crawlers that have a place for a winch to be installed.

This worked great as a motor for a theater prop (Mary Poppins’ magically making a broken table come back together). We just needed a small motor to pull in about a foot of cable, and controlled off stage. This worked perfectly, and was small enough and quiet enough so the audience didn’t notice it. One note I would make is that the winch does not have any kind of cable guide when retracting the cable like a real winch would. This was not a problem for our application, but it could be a problem for other applications if a longer stretch of cable needs to be retracted. Just something to keep an eye on. Overall this thing was great and I recommend it.

Arrived broken. Motor runs but does not spin the winch. Had to buy replacement gear set and motor. Didn’t feel like going through the return process but would not buy again. Disappointed in injora and feel like I should have expected what I got. In the attached picture you can see how the gears are damaged

Winch is stupid strong if powered direct . I am having to return due to control box wire plug was faulty . If I were good at soldering I could have fixed it . But Stregth , look and hardware is excellent for the price . Has a cable not a string . I mounted mine in the front battery tray on trx4 high trail . Running direct 3s . If you go through channel 4 and esc it won’t pull flea off your balls . Overall nice wench

Easy to install, size perfect for 1:10 scale, works as it should very powerful!