Mallet MTB Bike Pedal

I've put a few miles on my pedals. I'm currently using them with the Ride Concept Transition shoes, and they work great. A big advantage, in my opinion, is that when I have to pedal through some sketchy areas, I can unclip, pedal, and quickly clip back in. It took me some time to learn how to unclip fast from them. I changed the cleats to the bronze ones, and now they're perfect to use.

I needed a hybrid mountain bike pedal for my new enduro bike. Since I have been using CrankBrother cleats, I had few options. I have been riding with the Crankbrother Candy pedals for a couple of year and I do like them a lot but I wanted a pedal with more platform for my enduro bike since I had planned on entering some enduro races with the bike. These pedals have enough grip on my clipless shoes so when I can't clip in, my feet don't pop off. Overall I loves these pedals and will be replacing my Candy pedals on my trail bike!

Mounted these on my trek fuel ex7 gen 5. I’m very happy with my decision on these. Lots of support while securing my foot. I have no fear that I won’t be able to get my foot out. Even on a tip over. Crank brothers must run some nice bearings.

I got these pedals for Christmas 2015. I wanted to ride them for a few months for giving a review. I come from riding flats on my mountain bikes and heard from everybody that clipless was the way to go. I had to give it a try, but I have watched my buddy "stop and plop" fall on his clipless often enough that I was a bit reluctant. I paired these pedal with Five Ten Impact VXI Clipless shoes. The combination of the shoes and pedals are very versatile. I wanted a pedal I could ride both clipped in, and as a flat for those sketchy technical sections where I often like to put a leg out. It took me only a couple a rides to get used to clipping in, but a bit longer to get comfortable clipping out. It's easy to unclip, so long as you anticipate when that need will arise. The problem for a new clip rider like me is sometimes if forgot, and plopped over. That's what elbow pads are for :) I have probably fallen a dozen times due to my feet being clipped in when I came to a stop, and I forgot, and leaned the wrong way. All of those incident were at low speed while coming to a stop, not while riding. I have now been riding them for 2.5 months and rarely have that problem. My recent success has been a combination of anticipating when I need to unclip, and getting my muscle memory up to snuff. I like riding these as flats when I hit the rough rocky technical sections where my bike might stop suddenly necessitating a quick foot drop (both uphill and down). At first, I had the pins so low that the center spring was so high that my shoes wouldn't touch the pins. You can ride like this, but it doesn't inspire confidence because the center clip does roll, and although I rarely slipped, it felt like I could at all times. Next, I raised the pins to be taller than the center spring. They rode great as flats, but it was hard to clip in, and really hard to twist out because the pins dug into my shoes too much. I finally hit the sweet spot. I lowered the pins to be just below the center spring in terms of height. Perfect, I can clip in and out at will and ride them like flats when I felt it was necessary. I really do love being clipped in when I am climbing smooth trails or fire roads. It makes a big difference. I have tried regular flats a couple times since, and miss the clippless efficiency. I love being able to switch on the fly to ride these pedals like flats when it gets a bit rough. With the pins adjusted right, they grip very well. I cant emphasize enough how important it is to get the correct shoes if you plan to ride them both clipless and flats. The Five Ten VXI is an amazing combo with these pedals. People who are used to SPD clipless should know there is no tension adjustment on these pedals. You can set the cleats to disengage at either 15 or 20 degrees, that's it. With the pins at the right height, 15 is fine. My local trails are very rocky and technical, otherwise I wouldn't sound like such a sissy about getting my feet out. On the smooth stuff, I have no worries at all. If you are looking for a versatile pedal to use as both clipless and a flat, this has to be one of the best on the market. They are still my everyday pedals. Ride on...

Great pedals, my only concern is why for such a rugged pedals why did they use plastic crank covers. Second ride with the pedals and the plastic bit keeps coming out. What do I do in this case Mr crankbrother?

Great pedals! Work well with the Mallet clip shoes from Crank Brothers. I like that i don't need my riding shoes to use them. If I decide to just go on a quick ride with my wife, I can just hop on the bike with sneakers.

llego perfecto y rapidisimo

I love the crank brothers Mallet E. Running them on two of my bikes. Great adjustable grip. Smooth cleat performance, quick to setup and install with no messing with cleat tension. Vale wise they are more expensive than the competition but you get what you pay for in performance and quality.

Delivered in 3 days very happy with the product.

Perfektes Produkt, entspricht meinen Erwartungen.

Zum Downhill oder Enduro Biken nix besseres

Easy to clip in and out, holds well when pedaling. Platform is great for when you’re caught with a foot unclipped

Ordered theses and the pedals came slightly dirty, the cleats had obviously done 1 or 2 rides so whilst the pedals are great they were not new. Amazon is not eBay you should be getting new items