Junction Box, Zulkit Project Box IP65 Waterproof Outdoor Box ABS Plastic Electrical Boxes Electronic Enclosure Black 4.5 x 3.5 x 2.2 inch(115 x 90 x 55 mm)(Pack of 1)

Box worked great for a switch junction. The he box is waterproof with a good seal. Was surprised.

Very nice project box. It’s exactly as described, strong, and also nice looking.

Easily one of the best project boxes I've ever purchased. This thing is not your typical project box, but it's like the old Bakelite thick sturdy boxes I remember buying years ago. It is very well thought out and laid out, and even has threaded inserts in the plastic and an O-ring seal. A lot of value for the money and very well put together!

These boxes will do the job if you need to protect electronic equipment outside. It comes with a piece of round rubber gasket that you need to cut to length to achieve a waterproof seal. This is not difficult to do, but be careful when making the cut. The screws are embedded and do no protrude. I installed a Starlink power connection inside this box and had enough room for the incoming wire, soldered connections and heat shrink. The box is robust and will stand up to wear and tear. Getting two boxes was a good value.

Used to set my Router on to get off floor nice box

works .

Great quality and watertite gasket . Perfect for my project

I'd take off 1/2 Star since you have to install the gasket and it isn't a continuous gasket, but the box is sturdy for being plastic, has stainless screws, and is offered at a decent price. I will buy more. I'm using one box to mount a buck converter, on/off switch, and 9vdc power jack with a battery converter mounted on top for a Milwaukee Fuel battery. It provides ample, clean power for guitar pedals. The batteries last many gigs before needing a recharge, it's easy to carry a spare battery and it eliminates searching for a 117vac outlet, ground loops and having another power cord on the stage. Use a daisy chain, plug and play, excellent clean power and far less expensive than the regulated, filtered power supplies they try to sell you. FYI, you can do the same with a DeWalt battery adapter, or any other. You'll need this box, the battery adapter (they come with on/off switches and fuses), a buck converter and a DC out jack. Tools; a drill and bits, screws to mount the battery adapter, a soldering iron with solder, and a multi-meter to set the buck converter voltage. Not difficult to do.

excelente

Handy for all kinds of projects, well made project box.

good!

Le quite una estrella porque están muy caras, pero la calidad esta buena.

This project box is credible, however, it has standoffs in the bottom, two of which have threaded female brass inserts to accept machine screws. These are intended for use with a mounting plate so project builders can build components onto the plate outside of the box in the open and then simply screw the base down inside the box when they are done. If the vendor is not going to include the plate, they should at least offer it separately. In my case, I work with plastics and easily made a mounting plate of my own. I made all the cut outs in the box using a rotary cutter (rotozip) and found the ABS body to be much tougher than I expected. Zero issues with cracking despite some of the big holes I put in the box. Everything you see in the photo and video was purchased on Amazon including the ASPL lights, the Talentcell rechargeable battery, the power distribution and accessory unit, even the cable glands. All excellent Amazon products leading to an outstanding outcome. My Rize bicycle has never been the same. When cars approach my bike at night from the rear on lonely country roads they slow right down because they don't even realize it is an electric bicycle. The ASPL (Amazon) strobe emergency lights are so bright they even flash off the trees on both sides of the road.