Apple Watch 40mm Case with Screen Protector

Super thin, not bulky, and offers great protection. I love how the tempered glass is included with the bumper, you can change your watch band without removing the screen protector, and the touch screen works flawlessly.

I had been using screen protectors and bumper cases since I got my Watch last year and all of them have bubble in the corners. The last protector had bubbled an hour after installing it so I knew I needed something else that wouldn’t drive me crazy every day. Enter this case by LK. I installed it today, July 5th.So far I find the touchscreen is very clear/responsive, the sides are covered, and I don’t have any bubbles on the screen!! There is a black line going around the case that I’m aware of when the case is on the Watch. I like the look and find that it helps the screen to stand out a bit. Screen size isn’t taken away by the line either. Because the case is clear I can see the sides and find it looks very nice on the watch. There is an open space by the power button so you can actually press it to turn the Watch on or off. The Digital Crown is easy to rotate and barely sticks out from the case. I feel as if it’s protected from accidental damage well enough. The speakers on the side have precise cutouts. Because of the placement of the case you can easily swap bands without having to remove the case first. The case is easily clipped into place (insert Digital Crown side first) and, while I haven’t tried it yet, removing to clean should be just as easy (I think?).I do have 2 concerns that I’m sure will eventually occur... the first is dust particles getting into the case and the second is water/moisture/sweat. When these occur hopefully a simple damp cloth will clean the case well enough to have it looking clear and new.I will update this review when I have to clean it for the concerns listed above or if my views on the case change.

I purchased the LK Tempered Glass Case to replace a messed up 1½ year old LK screen protector that went bad. I carefully installed the new case as per the directions. It looked great. I was very pleased. The next day I noticed a very small light scratch in the middle of the black screen that neither my wife nor I had seen previously. I couldn’t feel it with my finger. It might be on the inside of the case screen. I reported it to LK Customer Service and they quickly and graciously offered either a refund, or replacement, which I accepted.Meanwhile, using the watch with the glass case I noticed some differences from the previous old LK screen (not case). The cover is not as sensitive to touch for selecting on the watch face, like the numerals for opening the watch, selecting the timer to start, etc. Each time I’d want to select something I’d usually have to hit it 3-6,7 times. Other than that annoyance, which hopefully will improve, it looks nice but I do want it to work well too.Having written the above and getting ready to post it, I tried the screen again different ways. I noticed the problem described above happened when I used the flesh of the finger tip, but when I used the fingernail tip it did work better, sometimes with just one extra click. So if it does not work well one-way, try it another. It could be with use over time this problem will diminish or end.Added: after several more days I saw that the sensitivity did improve significantly and sufficiently with my finger that I happily raise my reviews from 4 to 5 stars.

I was initially looking for a screen protector that physically sealed to the face of my watch, preventing water entrapment by the screen. I wanted a bumper to protect the sides, but I had difficulty finding a screen protector that would work well with a bumper. My previous case trapped water between the screen and case, which made the touch screen difficult to non-functional, depending on how much water was in there. The watch band had to be removed before I could get the case off to dry the screen and inside of the case. Such a pain.Disclaimer: this is an early review. I’ve only had this case on my watch for 24 hours, but it seems to be absolutely perfect. I was hesitant and unsure if it would do exactly what I was looking for, but I did read the perimeter of the screen portion had an adhesive. I’ve washed my hands numerous times since the case was applied. The screen is completely unaffected. Water does get trapped between the sides, but it does not get to my watch face. It’s nice to not have to remove my band and case 20 times a day. I do not shower or swim with my watch, so I can not attest to that.Obviously, if your hands are oily for whatever reason, you will leave a print smudge on the screen. I’ve found they easily wipe off with a quick rub of my shirt. Probably not the best method to clean, but it hasn’t scratched it yet. It’s still far better than dealing with the water issue from my previous case.The touch responsiveness blows my mind. I bought my previous case when I bought my watch, so it was all I knew. I never realized how much of a lag there was, but I did know I had to tap the same thing, sometimes, multiple times before my watch would respond. This is not an issue with this case. Response is immediate.Application was easy and self-explanatory, but I still watched the video, just in case. Overall, I am incredibly pleased and highly recommend this product. If my opinion should change, I will absolutely update this review.

I purchased a different protector less than three months ago and already it's cracked. Thus I purchased my LK-case because of the warranty. It comes with an instruction video, but it's so simple to put on that it wasn't necessary but I viewed it any way. It appears to be everything I hoped for. Oh, by the way, I got TWO protectors for less than I paid for my first one. Can't go wrong.

For full transparency, this isn't my first LK product so naturally, I'm already familiar with their quality. Having said that, I was very curious to try a case like protector. There are some activities where you just don't want to chance damaging a beautiful and expensive item like the Apple Watch.I found the contents provided to be very encompassing. There's even a card (not pictured) with the link to an installation video. Installing it was honestly way easier than installing a screen protector on an iPhone. Contrary to those, when peeling the film under the glass, there were no particles that got under it. This made it so that it went on perfectly from the first get-go.The case is sturdy and doesn't add much bulk to the watch. It's very light in my opinion, fits well enough that there is no issue with the touch response to the screen. The only two small negatives that I would say is that the glass doesn't exactly seem to sit flush with the screen as you end up getting air bubbles/condensation when washing your hands. The other thing and this is simply a matter of preference, I think the black border should have been transparent.All in all, really happy with this!

I thought these were worth a try, but they do spoil the streamlined look of the watch. I can’t answer to how durable they are because I’d intended to try one on anyway, only to realise that they do have to be stuck down like film.

Easy to install and a great price

This is the 3rd type of screen protector I’ve tried for my Apple Watch and the one that I’ll be standing by. I like that it’s a hard plastic so I don’t have to worry about yellowing over time like with some silicone protectors. Just installs with a little push and it’s secure. I chose this because the borders are clear and allows me to showcase the rose gold frame of my watch!The downsides I’ve seen are as with other reviewers mentioning that some condensation comes in between the case and the watch at times, but I’ve had that happen with other cases as well, so it’s not exclusive to this specific case. I’ll usually just take it off to do a quick clean anyway, so it’s not a huge problem to me. Also, I initially was having difficulty with the touchscreen, but I changed some of the settings and was able to address it easily.Overall, my favourite of the screen protectors I’ve tried!!

Ich habe mich für dieses Case entschieden, weil ich ein rundumschutz haben wollte, aber mein schönes Stainless-Steel nicht verdecken wollte. Das Case ist komplett durchsichtig und aus hartem Plastik. Der Bereich auf dem Display ist dünnes Silikon denke ich mal. Alles funktioniert weiterhin ohne Probleme, Schütz und sieht gut aus. Kommt außerdem mit 2 Cases in der Verpackung und alcohol, microfaser und Staubklebesticker.