Garmin Motorcycle Power Cable

Perfect kit with plenty extra wire.

I have a Garmin Zuno GPS for my Harley Davidson and it's power connection began to go on the fritz, until it completely quit working. I was worried it could be my unit, but upon reading that others had an issue with their power cable, decided to give this a try. Replaced it and now my unit works and is power perfectly again. I have wondered if the original cable failed because I had it hard wired to the battery, so always with power going through it? For this one, I have required the entire setup to now go through my accessory switch, and that only when the bike is running anyway. Fingers crossed to get a good few years with this!

Great product, I needed a setup for a second device

When I was considering buying this I wondered how long it was, nobody ever mentions it in the comments, that I could find. It is approximately 52 inches from the voltage converter to the end of the plug, and 21 inches from the converter to the end of the wires. I just opened the package but I expect it will work just like the original part that came with the XT. I bought this (and a holder) to be able to use the XT in my truck or Bronco on occasion. While both vehicles have gps capability the XT is much more capable when I need it. It is probably overpriced but the price is the virtually the same everywhere.

I've installed this on to two motorcycles so far. A 2019 Honda Africa twin, and a 2023 Honda CRF300l. The CRF was the most recent. In both cases, I connected to a power source under the seat. This is a power cable for a Zumo XT, which wants 5V input, not 12V. (I think the Zumo XT 2 must take 12V, as I inadvertently ordered the wrong cable this last time, and it doesn't have the DC-DC voltage converter.) In both cases, I would have preferred to put the voltage adapter under the seat, but doing that would have left the cable too short. So I had to have the adapter cable tied someplace less secure further forward. And in the first instance, pushing into the space I had caused the plastic housing to separate. So I had to epoxy that and seal it. Since these are about US $40, they could be a bit longer. The mount itself is well made, and this connecter integrates into it securely.

Works as expected. It locks into the garmin xt2 saddle as it should. The battery wires are about 5 foot long. You need to supply a fuse and switch if needed. Order some double side tape to stick the module to faring etc.

Order to replace a faulty one that was on my bike from 21 and got pinched between the skid plate, when changing out the battery at the shop. Not hard to replace just about 1/2 hour to complete.

This cable is for and XT, not the XT2. The Garmin part number for the XT2 cable is: 010-13285-03

Super Lösung für mein Navi

Trovo la spesa non proporzionata all'articolo ma ahimè non si può fare diversamente

Got what I needed, and this being a Garmin accessory, it works as advertised!

Worth the cost & excellent quality.

Bonne qualité de fil. Bon remplacement pour celui d'origine, facile à installer. Fonctionne bien