Gunpla Adjustable T-Handle Ratchet Tap Holder M5–M12 Threading Wrench Hand Machine Ratcheting Screw T-Shaped Tapping Thread Metric Plug Tapper Tool

Very easy to use with functional grippy knurling on the adjustment head and handle so you can spin freely by hand and adjust the chuck, It's got some weight to it and is nicely sized and looks to be of great build quality. It's a nice bit of kit if you're just after a simple and effecient tap holder, the locking mechanism is nice and the ratcheting function works smoothly. Worked nicely for me to tap a m6x1.0mm threading in some aluminium.

Excellent product, good weight and did the job in a tight situation

I got this to replace a damaged equivalent from a cheap and cheerful tap and die set. It appears of adequate quality for light work and does the job - but it will never be a family heirloom.

Simple and surprisingly strong, under a tenner and delivered in 22 hours. Perfect

Having used the old bar design, where the tap is held flat with the handles pushing the vice in, this is so, so much better. I used this to tap new threads into a Gearbox housing, and due to its position and orientation, the traditional holder wouldn't do the job, but this did. The ratcheting is especially useful and can be reversed for clearing the thread after the turn. The fact it goes all the way up to M12 means it's pretty much everything I need from a tap holder. Absolutely would recommend.

Ratchet selector is too easy to hit by accident. Jaws are also a little 'iffy' on larger taps.

Works great in confined spaces.

This is a very nice tap wrench. The only problem with it is that the chuck will only close down far enough to take a 5mm tap; if it wasn't for that I'd have given it 5 stars. If you only use taps 5mm and above then this is fine.

Ottimo prodotto lo provato filettando con un maschio M 10 senza nessun problema

No vale para machos de métrica 5

Ok

Matériel commandé pour un taraud M12 mais qui n'est pas adapté au carré de 9 mm. Retour Amazon sans problème.

a bien tenu pour un taraudage de 12 sur acier épaisseur 20mm ! donc très convenable !