Makeronics Acrylic Case/Enclosure (Black) for Jetson Nano B01,A02,2GB Board with Camera Case | 5V PWM Cooling Fan | Power & Reset Control Switch | Assembly Instruction Included

I would like to formally suggest the following very minor improvements: 1) Provide a link to a soft copy of the instructions. My eyeballs are old and the pictures are hard for me to see. 2) Peeling the protective paper off is the most time consuming...specifically with the pieces with lots of cuts and / or logo or similar on them. I hope that can be made easier. 3) Change the assembly instructions to mount the small standoffs to the bottom of the mother board first (step 3). Then step 3 as it is. Great case. I really like it. Thanks.

OK, first of all I don't know why there are a couple of reviews saying this only supports the older Nano A1. I have the B1 and it works fine with this case. The printed instructions show side panels not quite so open as the ones that I got in December 2020, so maybe the other reviewers got an earlier model, but as of Dec 2020 this enclosure supports both boards. The best reason to buy this is that it gives you a power on/off button and a fan. (You should plan to power the board with an external power supply, not the USB port.) Speaking as a tech writer, I think the instruction booklet could be a little more detailed, and there are some YouTube videos that don't help because they're dealing with an earlier version of box, but it's not bad, and Makeronics says if you're having trouble send them email and they'll help you out. One thing they do right is they include extra screws and other parts so if you drop something on the floor and it disappears (it can happen) you are not dead in the water. Big plus mark for that. The worst part of assembly is peeling off the paper that they stick to the acrylic parts to prevent scratches. It comes off easily once you have pried up a corner with a fingernail, but it takes a while to get it started. The other thing that took a while was wiring the power and reset buttons to the jumpers on the back of the Nano. Took me a couple of tries to get all the wires on the right pins. Well worth the effort, though. I haven't put the camera bracket together, so don't ask me about that, but it looks pretty simple. All in all, highly recommended. Solidly designed and built, love having the power button and fan (don't know exactly what the reset button is good for, but I'll probably find out), instructions are pretty good in spite of my grumbling, and it just feels like it's made by people who are trying to do it right.

It’s received on time. The picture on the Amazon product specs says not for B01 but it fits perfectly fine for my B01 model. It has a plate for prior model too. So I guess it will fit the prior Jetson Nano model too. I have Jetson Nano B01 4GB model. All the parts work fine except the camera mount. It’s little difficult to assemble and then mounting the assembly on to the main box is not perfect. I used a cable to to tie the assembly to the main box by putting the cable tie through two holes provided. Otherwise it’s a good box at very good price. I have added photos for the assembly of the box. One star less for the camera mount assembly.

Excellent.

this case is open enough to allow access to all the pins and still look stylish in the process. love the wireless ports to mount the antennas. looks classy and works great.

It's not the money and I guess you get what you pay for. it was really the time sink and dissatisfaction with the final product.

The quality of the item was great...went together easily. Very professional looking. Able to begin my project immediately.

The came with exter parts so you are not screwed if you lose a screw. The kit is for the 4GB model but I have the 2GB nano. Reversing the faceplate allows USB-C power BUT the micro-USB port will need to modified if your going to need that. I do not for my use case. I had one fan fault that I was able to isolate to the fan and not the nano. I bought 3 kits for my use so YMMV.