F2 Fusion Tablesaw

Great saw for avid hobbyists and small professional shops. I make furniture personally and professionally, and I've been using the F2 Fusion tablesaw in my personal shop for about 4 months now. The saw arrived quickly in a large shipping crate. Assembly was very easy and my unit came out of the box nearly square. The rail Assembly and riving knife were easy to square up. Two people or a hoist are absolutely necessary to get the saw out of the crate safely. The cabinet does have the two wheels to move the saw around the shop. I decided to put mine in a four swivel wheel Bora base because I have limited space in my shop and it gets tight when I'm working on a big piece. However, the saw can be moved relatively easily with the two wheels on the unit. The 4in. dust collection port on the cabinet works well enough with a dust collector. I don't use the one that collects dust from the top because I don't like to use the riving knife with the kickback guard, and they have to be used together. I upgraded to the F2 from a contractor saw because my old saw was struggling to cut through the wood I use, and significant vibration/kickback issues. I also needed a saw that ran on 110v electrical service, so the F2 met those needs. The F2 has ZERO vibration issues so far. I've kept the stock blade on the unit and have used it to cut down Mesquite, Eucalyptus, Red Gum, and Rosewood which are all extremely dense hardwoods with no issues at all. The F2 has cut everything I've thrown at it like a hot knife through butter!

This table saw was actually of higher quality than I expected. I transferred a more accurate fence system and its attachment was so easy!! Love this saw.

Love the saw so far. Only running on 110v and still haven't had any problems. This thing is nice and easy to set up. I am still working on the dust collection but I only have a shop vac set up so of course it isn't sufficient. Happy with my purchase so far.

There are a lot of reviews online for this saw, and I find I agree with almost all of them. Fit and finish is excellent and everything seems to function well and as expected. It makes cuts as accurately as I can measure. Lots of good points. The negatives for me were, first, that converting to 220 volts with the factory kit was, in concept, very simple. In fact, getting things to fit or even reaching them was very difficult for me. It took a few hours to do what in concept should have taken maybe twenty minutes, even allowing for the tool you inevitably mislay. But once past that everything about set up went very easily and well. The other issue that I and most reviewers have is the dust collection system. It does collect some sawdust, but some still ends up inside the cabinet and getting to that is harder than it should be. I will probably do some surgery to get access, but it is a design issue that should have been addressed. Another annoyance is that when changing blades, there is a stabilizing washer that when you remove the nut that holds the blade can fall down the dust collection ducting. It can be retrieved with a magnet if you take things apart a little. I will try installing a mesh that will catch the washer but not obstruct the ducting. I don't know if that's a good solution, but it's what I can think of. Seems like that should have been someone else's job. So, in my opinion, a very nice saw with a few small, but irritating, flaws.

I really like this saw, from the guide that works well and is accurate to setting the blade angles with the digital read out. The motor is powerful and like the quick shut off I can tap with knee to shut off.

Very well packed. Well written instructions made set up easy. Very accurate, a real pleasure to use and makes my shop look great!

I’ve been using this table saw for over a year and am really impressed with the quality and consistency of the tool which I've used for a variety of woodworking projects from furniture builds to coasters and butcher blocks with a wide array of hardwoods including very hard janka scales (bubinga, etc.). The table itself is extremely flat and smooth and very well cast-- heavy and durable. Accessibility to the inside of the tool is also very easy, which make maintenance a breeze. The multi-collection ports for dust (bottom of unit and top above blade guard) work very well, the fence is solid and smooth....I’ve had no issues with accuracy. The included blade lasts a really long time as long as you keep it clean. It's also easy to keep the overall table level and surprisingly easy to move with the built-in wheels given how heavy it is. The manufacturing quality is very solid. Overall, I remain impressed and would highly recommend this table saw for beginners as well as advanced craftsman alike.

after a lot of research I purchased this saw from Rockler 8 years ago! I am a part time professional woodworker and have used this saw almost daily building furniture and whole cabinet jobs in remodels and new construction. It has plenty of power, cutting all 8/8 hardwoods, is accurate and the fence is rock solid. I just ordered a new HARVEY table saw with some impressive features but mostly out of a want. I don't acctaully NEED anything else. This is s great saw that I can recommend to any weekend warrior or serious enthusiast