- MasonryDefender Patio Paver Sealer - Low Gloss, Clear, Water-Based, Masonry Sealer - 2.5 Gallon

Application process was easy, low odor. Product seems to be performing as expected! Love the finished product!

followed instructions, easy work to apply. Happy with results, not shiny, but enough to look great.

Easy to apply with an inexpensive pump sprayer

Use this every other year to seal a slate sidewalk and the polymerized sand I use around the slate slabs. It seals everything together so there is no movement of slate or sand, and everything has a beautiful matte finish, which I prefer to a gloss finish. Easy to apply, with a great result.

I have used other products for my pavers in the past and this is by far the best that I have ever used. It actually does get into the cracks and sealed the sand in and it has a nice mild shine to it. well worth the price, it will take 2 coats for a slight shine and more if you want a more detailed shine. I used a sprayer which worked well. It does cost a lot, but considering what it would cost to have someone else do the project it is cheap.

I used on a couple of small brick walkways. Follow the instructions and try to avoid the rain for at least 8 hours. The product has held my sand joints steady through at least 3 heavy rains. One coat on, wait 2 hours and put a 2nd coat on. I used a pressurized spray container and then used a paint roller to even it out. I sprayed a little heavier on the sand joint but covered it all with the product. It’s a great buy and looks fantastic.

This is such a great product! We got our front walkway redone this summer and our contractor was going to charge us $1000 to seal it. He told us to go get a sealant. After much research we bought this one, and it was so easy to use! I did watch YouTube videos online before starting the project. This product gave our patio the perfect amount of “shine” without ever being slippery or to shiny. I also want to point out we got our back patio done 6 months earlier and did not seal it, and as you see from the second picture looks rough. We will be pressure washing and sealing it in the Spring with this sealant. If you are thinking of sealing your project, do it and buy this sealer!

I had issues with the sprayer I was using which seemed to get clogged with the sealer. I was able to finish project but ended up using a paint brush which worked good in assuring sand lines were covered completely. Think it will work well but time will tell.