TotalMount Drop-Free Remote Holder – Removable Adhesive Strips – XL White

Excellent. I mounted mine on the side of my lazyboy with screws and I love it. Works well. Has enough room for multiple remotes. Worth the money, because now I never lose my remotes.

This remote holder is exactly what I needed—no drilling, no damage, and no more lost remotes. The adhesive is strong and reliable, and the design is sleek enough to blend into any room. I mounted it on the side of my nightstand and instantly felt the upgrade in my bedtime comfort ritual. It holds multiple remotes securely, and the installation took less than a minute. If you’re tired of remotes slipping between cushions or cluttering your space, this is a small but mighty fix. It’s become part of my daily setup—practical, clean, and surprisingly satisfying.

Exactly what I needed and the adhesive worked great even on a grainey wood nightstand. Perfect for what I needed and super easy to install by hand. Cleaned the area with rubbing alcohol prior to mounting to ensure good adhesion.

This is exactly as advertised. We placed ours above our bed to hold the TV remote, the sound bar remote, and the Roku remote and it fits all 3 perfectly with room to spare! We have not worried about it falling or coming loose, I think you would have to pull at it hard to get it off the wall. It's roomy enough to hold the remotes, but not too big to be a total eye sore on the wall.

I almost didn't buy this because of it's price for what it is, but sprang for it as it was closest for the application for what my needs were. I mounted this to the end of the end table next to my recliner as to organize my 5 or 6 remotes and have them in quick reach. We have cats here and due to their Nascar episodes they have swatted them off with their feet getting up on to and off of the end table so I wanted to protect them from getting destroyed. This worked out well, but I had to brace bottom behind it for support as the design of the end table is such I needed to brace the bottom back of it. It comes with an extra section for the middle which I was happy to see as I did use it for separation put some smaller remotes together. It loses a star because of it's narrow depth. Even my smallest remotes stick up way farther than needed or wanted for access. I am still concerned the cats will somehow manage to plow in to them and break a remote or the holder. I didn't want this to be so freaking short in height. Also another negative is I used self taping screws with drill to mount this and the tab isn't tall enough to access the mount holes without fighting it for room for the drill bit head and drill to clear the unit. I guess in their wisdom of cutting the amount of plastic they used they ended up shafting the consumer. If they were smart they would make 2 versions of this, both with more raised mount hole area above front top of plastic and 2 lengths on height, a short and long storage area on the depth, then let the CONSUMER decide what works best. A good inch taller on the back so holes not only would provide better access to mount, but also would have lowered the height of the pockets which I would have loved far better. I had no concern to drill in to this old end table. It's sturdy and works well. These issues may not be of concern for some of you, but at least you have my thoughts and issues I had with it. If there were another company that made something similar at a far better price I would have bought that instead of this because I do feel it's way over priced. At least these heathen mutts I have won't be skidding the remotes clear across the floor anymore!

This is for the "TotalMount Hole-Free Remote Holder". There's a whole ton of different TotalMount remote holders on Amazon here and they can be kind of confusing. This is the one I wanted and it holds 2-3 remotes. The one that's 2x6 inches. It attaches a little differently by screwing or sticking a plastic mounting plate to the wall. The holder bit then slides into it. Because of this setup, it's not rock solid, it shifts around a little if you twist on it if that's a concern. The plus side is you can slide it right off the wall if you need clearance to move things around like in an RV which is where I installed mine. Now the main reason I wanted this one is it doesn't have that goofy rounded bump in the base to slide your remotes to the front. You have the full range of the "cup" to work with. So you can really pack remotes in here real good. Or in my case, a phone in a bulky case on one side and a remote on the other. There's a divider that you can remove all together, or set to three positions. But all of them are to the right. There is no center half/half option. You can only choose how fat or skinny you want the right pocket to be. If you attach with screws be very careful because of how the backing plate is designed. It's not solid plastic so it can be very easy to over tighten and crack the plastic. You'll see it flex when you start to get close. Looks very sharp. But like all shiny black plastic, it shows ever smudge that gets on it.

As the description says, this holds 4 remotes. It is very easy to install and seems to hold well.

Works great, have it near our bed. May get more in future. Like that it can hold a charging phone or similar device if necessary.

Perfect

J'ai acheté ce produit il y a plusieurs mois déjà. Le plastique est de bonne qualité et grâce aux bandes 3M, il tient très bien au mur. Les bandes se décollent relativement facilement au besoin et peuvent être trouvées facilement pour remplacement. Le seul bémol est qu'il est un peu cher, mais vu ses qualités, je le recommande.

Excelente calidad muy bueno recomendado 100 %

Me gustó mucho, se ve de buena calidad y fue de los pocos que encontré como para poner 3 controles con separador.

The product is exactly right for the space on my wall, and it keeps the remotes together and accessible.