PSPVC4

This is perfect for my system. I have two distinct amps and 4 speaker zones (2 of which are adjacent to one another on the same floor). I am able to easily select amongst the two inputs and designate which speakers I want to play with the press of a button. Additionally, the individual volume controls are great for balancing audio into a seamless experience, particularly for the 2 distinct zones right next to one another. The only criticism is that the pegs on the back are realatively close to one another, so threading the speaker wire took a little time, but this is typical.

This is a very nice tool for me to compare my speakers I can connect 4 set of speakers, and play any combination and also compare two different Amplifiers and play any set of the four set of speakers with Amplifier A or B and very easy to connect your speakers

I have the PSLSW4 4-zone speaker controller but they also make a 6-zone controller. I have this mounted on my covered patio and it is fed from a Bluesound Node audio streamer and a Fosi Audio TB10D amplifier. My Fosi amplifier puts out about 100watts a channel at 8ohms with the upgraded power supply. The Pyle speaker selector will accommodate 2 separate input devices. A or B so you could have different sounds playing in different zones. I am only using zone A. The preferred zone is selected with a switch adjacent to each volume control. It is either A or B but to turn off individual zones to be OFF, you must rotate the volume knob to OFF. The volume knob click into each volume level - it is not a smooth rotating dial but it works fine. There is no crackle or pop when moving the volume control knob. the back of the unit has plenty of room to connect the speaker wire either directly or using a banana plug. There is no balance control for right to left channel adjustments. I am feeding 2 sets of patio speakers and 2 sets of rock speakers out in the yard and all are fed with 14awg wire. All my speakers are 8ohms. My speakers sound fine and they get loud enough for adequate sound. This is an outdoor background sound system and it won't sound like a rock concert in your backyard. Make sure your amplifier is stable down to 2ohms if you will be playing all 4 speakers simultaneously. If only one speaker is ON it will see an 8ohm load on your amplifier. If any 2 speakers are ON, your amplifier will see a 4ohm load. If any 3 speakers are ON your amplifier will see a 3.1ohm load. The Fosi class D amplifier I am using is rated from 2 to 8ohms. This switch can handle up to 100watts RMS input with 18watts RMS output per speaker output. This switch is passive so it doesn't require any power source.

works great. easy to use and set up. the individual volume is really a great feature. little difficult getting it wired up due to the type of connection but no big deal. perfect for being able to play louder poolside and quieter in the house for sure

I have a nice receiver/amp with 2-Channel input/output. I needed a Speaker Selector Switch to control 4 discrete listening zones from the two different inputs. The Pyle PSLSW4 Multi-Zone Speaker Selector System is just what I wanted. The unit was incredibly packaged which is a good indication of the quality of it's contents. The unit was easy to install especially with the Sewell SW-29863 Deadbolt Banana Plugs (also purchased from Amazon). Once connected it was very easy to adjust the volume to the front and rear ceiling speakers in our great room to extract the best stereo affect. When entertaining we can have lower volume inside and more volume outside on the pool deck. Really improves our flexibility for entertainment. It is not an Amplifier so your Receiver/Amplifier needs sufficient power to drive all of your speakers.

I have a 5.1 system inside and 2 speakers outside. This is a 4 speaker pair setup which you would think is perfect... well no... only has 2 inputs. So this means front speakers on one channel, 2 inside and 2 outside (Button A). Surround on #3 channel (Button B.) Boom... done. BUT... have sub woofer and center channel so need to unplug subwoofer and ensure that center channel is not on. Had to buy remote transmitter/receiver for outside sub. It works good. I do not believe sound quality has been compromised. I cannot hear any difference when I have everything turned on vs. just inside or just outside. This would be perfect for 2 channel systems with 1 amp or 2 amps or 4 channel system and 1 amp. I could not find a 5.1 system for under a ton and 1/2 of money!

Adding a set of outdoor speakers on my deck, I needed an A/B option for volume control. I first tried OSD SSVC2 which was a nightmare (see that review). A friend who does home theater installation suggested the Plyle PSLSW4. It's a well made, fully functional option compared to the SSVC2. Sound quality was superior along with the capability to use a heavier gauze (12 vs 18) speaker wire. Price of both units were about the same price.

I currently have patio speakers connected to Yamaha RV-V640 Zone B speaker connectors and wanted to add a set of kitchen speakers to Yamaha RV-V640 Zone B speaker connectors. I attempted to install Pyle PSLSW4 speaker selector (via A Amp connection) to my Yamaha RV-V640 Zone B speaker connectors and then connect my patio and kitchen speakers to the Pyle PSLSW4 speaker selector. I used 12ga monster wire on this and all speaker connections in my house. Problem is that no sound comes out of the patio or kitchen speakers when they are routed thru the PSLSW4 speaker selector. Tried all viable on/off combinations the Pyle buttons and volume controls. Nothing worked. Sent email to Pyle support; got no response. Now I have to find another product. ** Follow-up: I finally got a notification from the Pyle vendor to call them if I needed help with the product. Called them and they had me go thru some basic debugging, then told me the product was probably defective. Returning product to Amazon. May try again after Christmas holidays. FYI ... The reason I wanted this product was because it supported banana plugs, 12ga wire, plus had volume controls. None of the other products had these features.

متوسط

Estoy muy satisfecho con este equipo, puedo distribuir muy bien mis bocinas, pero sobre todo, nivelar el volumen de cada par.

Compré uno para mi casa y a menos de 5 minutos que quería comprar otro (para ponerlo en mi oficina) el precio ya había incrementado $700 mas, lástima de vendedor. Veré si funciona bien el único que compré!