Cases Pro Series 6U Rack Case with Shallow 13" Depth, Roto Molded Made in USA (G-PRO-6U-13)

This is a solid case. I like the design. Hold plenty of the stuff I need it to.

GOOD, LIGHTWEIGHT, WEATHER PROTECTED. I have a heavy PA amp, So in order to bolt it in and keep its relative position in the case, I had to cut a piece of 1/2" plywood to lay in the bottom. If yo do the same, be sure to notch it so that the plywood does not set on the nuts that secure the handle assembly. I have bought several Gator case products. I have been happy with all.

Lighter than wood and seems sturdy. is big enough to keep patch cables plugged in back with the lids on. Would be better if it sealed air tight, but it’s alright.

This case is used for a portable PA system for my shows. I like the overall look of this case, and it does come with a good supply of rack screws and washers. I also like that there are rack rails in both the front AND back of the case, very handy for adding rear supports to heavier gear like amplifiers. (I'm using a QSC CX model that doesn't need the extra support.) I also like the use of seals in the front and back covers, those will help to keep dust and moisture out. Minor quibbles: The rack rails are not aligned well, only off by a little but still work. Some gear with tighter tolerance in the rack ear screw holes may not want to sit perfectly level in that case. My amp and mixer were able to be set level though. The latches are a bit fussy to engage, but seem of good quality. Time will tell how they really hold up. This case is a lot less expensive than a comparable SKB case, but overall seems as though it will be just as durable. Overall a great value and good investment to protect your gear.

Perfect size, very sturdy

Very light and does the job great! I am on my 2nd Gator case, only reason I had to buy the 2nd is because I decided to downsize to a smaller box for portability. Great case, great construction, light and VERY durable.

I used this as an IEM rack case for my band for 3 years of gigging. I had the whole thing fully utilized. The case itself is pretty hefty on its own. Due to the weight of the case we were often dropping it at a 6in to 1ft height every time we put it down, which doesn't seem like a lot but it adds up over time. Also due to the weight, the handles do flex, but we have four of these rack cases for my main job and that has never happened before, so its probably from overloading it with too much weight. All in all, every one of these cases that I, my band, or my co-workers touch gets absolutely abused and every single one of them is still sturdy and stable years later.

This case should work for what I will be using it for which is mostly a mostly garage band type of setting with occasional light to medium road usage. If I were a regularly gigging musician or sound tech and packed this around often or crammed into a cargo area with stuff thrown over it...this isn't the case I would want. It isn't terribly rigid or reinforced. I do like the latches and at the time of my purchase it is reasonably priced considering what molded rack cases go for. If I had it to do over, I would order one that isn't so deep, this one is almost twice as deep as what I require but that is simply due to the particular items I have mounted in it and not realizing my needs at the time of purchase. One thing I didn't expect was the sheer size of this case. It is about the size of a full-size piece of luggage but fatter. This is a decent case, but I don't think I would consider it truly road worthy if "stress tested".

These cases are great, there made well and light, gator has awesome products i been using for many years.

It does what is supposed to. Protect your gear.

OTTIMO PRODOTTO

Very solid! Needed for my Bose 1800 amp. Excellent, thx.

Ya he comprado está marca y está serie. Funciona perfectamente